Baltur Burner is a brand of burners, belonging to va S.p.A..
Chinese name
Best Burner
Founder
Ostrow
Company
Fava S.p.A Company
Praise
One of the world's leading manufacturers of thermal equipment
Fast
Navigation
Overview of Best Burner Company
Features
Commissioning Process
Manufacturer Profile
In the late 1940's and early 1950's, during a period of post-war reconstruction and rapid economic growth, Baxter Burners was founded by Giuseppe and Ferdinand, and quickly took hold of the country's thermal industry.
Fava S.p.A founder: Augusto Fava, but for the achievements of Patel Burners, Essiccatoi Fava S.p.A, which joined the company in 1960, deserves a great deal of credit, especially that of the founder of Fava S.p.A: Augusto Fava himself-. "Augusto Fava left a profound and highly personal mark on the companies of the group (Baltur S.p.A. and Fava S.p.A.), as well as on the economy of the area of the town of Cento."
Baltur's tribute to the businessman who created the kingdom of spaghetti equipment was not only that he grew Baltur from a small workshop into one of the world's leading manufacturers of thermal equipment, but also that he contributed greatly to the development of the local economy. in 1987. In 1987, Fava S.p.A. negotiated the acquisition of all the shares of the company, and with full control of the company, Patel burners have grown by leaps and bounds. This once for domestic industry insiders laughingly called 'if Riyalu is equivalent to state-run enterprises, he is a large collective Best, has now become a modern factory covering an area of nearly 30,000 square meters and employing nearly 1,000 people.
The third generation of the management team of Best Burner. The third from the left is Mr. Riccardo, the current director of BITE
BITE burners are one of the earlier brands to enter the Chinese market, and like most imported products, were initially sold at eye-wateringly high prices. 91 years ago, the Dalian Railway Boiler Factory, for the purpose of environmental protection boiler research and development, after several rounds of negotiations, finally purchased a BT34DSG in Hong Kong for 8,000 U.S. dollars. In the late nineties, the domestic market demand for environmentally friendly products, including burners, has rapidly surged, and brands such as Baxter burners, Riyalu burners, and Veso burners have made great strides in the favorable market environment.
BALTUR Company Overview
Italy BALTUR S.P.A (BALTUR Company) produces "BALTUR" burners marketed in more than seventy countries and regions, the earliest of its kind to obtain the ISO9001 international quality certification, excellent quality, reasonable price, international reputation, and enjoys a very high reputation in the same industry. BEST burners are suitable for various types of industrial boilers, civil boilers, petrochemical industry, road construction machinery, glass enamel, medical and environmental protection and other industries. It contributes to the environment and the control of air pollution.
Quality certification
In 1994, the company obtained the UNIENISO9001 quality certificate, and became one of the earliest companies in the industry to obtain this certificate.
This means that the company meets the strict European standards at every stage of the process, from design, production to after-sales service. It is a recognition of the continuous improvement of products and services as well as the comprehensive quality assurance for customers. For many years, the company's approach has been directed towards environmental protection, a fundamental characteristic of the leading edge of our times; the outstanding results achieved by the company in terms of product reliability and extremely high levels of combustion performance are the result of the commitment to innovation made by the company's Research and Development Department.
Best's Research Center is staffed by a group of technicians and specialists with extensive experience in combustion technology, and these innovations are based on rigorous experimental studies of prototype burners and thermal equipment with capacities ranging from 16 to 46,000 kilowatts.
Best's research and development department is committed to innovation.
High technical content
Best burner construction is based on the principle of producing thermal equipment that is extremely reliable and easily accessible to each component for machine repair, cleaning, testing and maintenance. The special pressure resistance and the compact size of the burner in relation to its thermal capacity and the extremely low power consumption - these characteristics are the focus of the technology and functionality of a product with a high technological content.
Features
Main features
A. The burner is made of cast aluminum shell.
B, the fan has a strong pressure-resistant special structural design, which can make the burner installed in the semi-positive pressure and positive pressure boiler can also be safe operation.
C. The sliding connection flanges on the burner heads allow the installer to mount the burner heads in the exact position for the furnace chamber and connect them precisely.
D. The burner head is constructed so that the burner gets the best possible combustion ratio at every point in its operating range
E. The electronic equipment controls the entire operating process and safety and security features.
F, many models, wide range of capacity.
G. Easy installation and maintenance.
H, burner assembly is complete, easy to connect on-site.
Best burners have one-stage, two-pole, progressive two-stage and progressive two-stage with proportional regulator (the latter implement proportional regulation operation).
A, one-stage: burner only on/off function.
B, two-stage: burner operation off, on the small flame and the maximum thermal power function, and from the maximum thermal power position can automatically return to (through a special thermostat or pressure switch control to the small flame operation.
C. Progressive two-stage (DSPG): The progressive two-stage burner is capable of operating at two different thermal power levels, switching from one thermal power to the other by means of specialized sensors (thermostats or pressure switches) at intervals that are required for servomotor control of the conversion of thermal power from minimum to maximum (and vice versa). The air/fuel ratio can be adjusted extremely accurately over the entire operating range (from minimum to maximum) depending on the specific requirements of the boiler.
Proportional operation
The proportional burner is used where the thermal power has to be constantly varied due to the special requirements of a boiler with frequently fluctuating loads, and this operation is realized through the assembly of a DSPG (progressive two-stage) with an automatic thermo-electric power regulator (RWF40), which controls the regulation servomotor to achieve an increase or decrease of the thermal power by means of a sensor (temperature or pressure) and a field matching device (contained in the RWF32 regulator). The RWF40 regulator is of the PID (Proportional, Integral, Derivative) type. The adjustment setpoint is adjusted by moving the RWF40 adjustment pointer mounted on the burner. Naturally, the thermal power level can only be varied within the "maximum" and "minimum" limits of the burner.
Proportional adjustment is achieved by using a servo motor that allows the air/fuel ratio to be taught at any time over the entire proportional adjustment range.
Industrial burner series:
GI series in large systems.The GI series industrial burners are designed for industrial applications and have a monolithic construction (thus more compact than a normal burner of the same thermal power) with a capacity ranging from 1581 to 7316 KW. In addition to the GI burners, there are also burners in the industrial series of larger capacities: the TS series with separate fan, the TS series with adjustable flame for separate fan, the TS series with adjustable flame for separate fan, and the TS series with adjustable flame for separate fan. PYR series with adjustable flame for separate fan.
Burner classification
Oil burner, gas burner, oil and gas burner, heavy oil burner, automatic burner
Commissioning process
Checking before commissioning
1. Check whether the gas is in place, whether the gas pipeline is clean and smooth, whether the valve is open.
2. There is no leakage of pipeline, pipeline installation is reasonable.
3. From the gas valve in front of the pipeline gas venting to ensure that the pipeline without mixed air, while venting pipe should be connected to the outdoors.
Internal inspection of the burner
1. Whether the combustion head of the burner is installed and adjusted.
2. Whether the direction of motor rotation is correct.
3. Whether the external circuit connection meets the requirements.
4. According to the line condition of the burner for cold simulation, observe the operation of the equipment components are normal and flame detection protection part is normal.
Burner debugging
1. Check whether the external gas in place, whether the pipeline is smooth, external power control in place.
2. Adjust the load of the burner to a small load, the ignition position is adjusted to a small load accordingly, turn off the large load for ignition and observe the flame situation, according to the flame situation of the servo motor or damper.
Precautions
1. gas burner continuously occurs when the second ignition program failure, should be shut down to check whether the burner gas supply system is normal, whether the circuit is connected to the correct, to lift the fault before restarting the burner.
2. Gas supply piping is strictly prohibited with a wrench or metal bar knocking, friction, to avoid causing static electricity or sparks, triggering gas explosion.
3. It is strictly prohibited in the gas supply valve group or pipe flange surface smoking, welding, cutting and other unauthorized work.
4. Strictly prohibited in the pipeline and the valve group and regulator next to any open flame test, to avoid major accidents.
5. Test the gas supply line for fuel, usually with a gas low-pressure meter test.
6. In the gas supply line, that is to say, it has been emptied, but there are residual gas or liquid droplets on the wall of the pipe, such as static sparks and open flames will also cause combustion and explosion.
7. When the gas supply line has been ventilated, and the valve group has a fault when the need to disassemble, first of all, must cut off the front of the valve group valve, and then the valve group to the valve group of the section of the pipeline to empty the gas, and then the valve group can only be disassembled and repaired.
8. In the commissioning work, the gas must be serious, safe and efficient.
9. Prohibit the use of non-explosion-proof electrical power tools on site.
10. VPS504 leak detection device must be checked before use of the valve group montage.
11. 600,000 kcal and above burners are recommended to use VPS504 leak detection device, such as the user does not match the customer responsibility for accidents caused by the customer