Tools/Materials
Surveillance Camera
Power Supply
Bracket
Impact Drill
Self-Tapping Wire
Sharp-Nosed Pliers
Operating Methods
One, how to install the surveillance camera
1, the first thing we need to determine the position of the installation, to connect the The camera's power cord, but also in the camera's setup interface, to be connected to the home network.
2, the next camera will be inserted into the internal memory card, you will be able to record the relevant video, but also need to adjust the position of the camera to the best monitoring angle.
Two, surveillance camera installation considerations
1, the installation of surveillance cameras must ensure that the line is very neat, but also to do a good job of ventilation, fire prevention, moisture-proof effect.
2, to determine the location of the installation, but also very critical to do a good job of waterproofing issues, such as we can be installed in the living room or a corner of the store, will be able to monitor the panoramic view of the interior.
3, but also to determine the way of installation, such as a hanging type, can also be installed in the wall.
4, if you need to install security cameras, you also need to reserve the power socket, and only after determining the location of the installation can be reserved, these are before you need to prepare. If it is a home security camera, generally speaking, DC voltage is 5 volts power supply can be.
5, now many people have a wireless router in the home, but also be able to connect with our camera, because now the surveillance camera in order to install the convenience of WiFi connectivity, you can connect the camera to the home router, you can carry out remote monitoring, but be sure to ensure that the home network is smooth.
6, but also need to choose a TF card, can be used to store video, and its capacity is generally 64G, able to store about a week.
01
First of all, debugging before installation, the debugging method of the security camera:?
1, open the camera automatic electronic shutter function.?
2, use the controller to adjust the lens aperture to the maximum.?
3, point the camera at an object 30 meters away, focus to infinity (most of the lens is facing the lens will be in front of the focus adjustment ring rotated clockwise to the head).?
4, use the controller to adjust the lens zoom to push the scene to the farthest, adjust the lens rear intercept to make the scene the clearest.?
5. Adjust the lens zoom with the controller to pull the scene to the closest, and fine-tune the lens focus to make the scene the clearest.?
6. Repeat steps 4-5 several times until the scene is always clear in the lens zoom process.
02
One, network camera installation:
1, take out the surveillance camera bracket, ready to tools and parts: up plugs, screws, screws, screwdriver, hammer, drill and other necessary tools; according to the pre-determined installation location, check the size and type of up plugs and self-tapping screws, try the bracket screws and camera base screws are appropriate, the pre-buried pipeline interfaces Whether to deal with good, test whether the cable is smooth, ready to enter the installation program. In order to meet the requirements of the surveillance target field of view range of conditions, the installation height: indoor off the ground should not be less than 2.5m; outdoor off the ground should not be less than 3.5m.
2, surveillance camera installation work, in accordance with the pre-determined camera lens models and specifications, carefully loaded with lenses (infrared integrated camera does not need to install the lens), pay attention to do not touch the lens CCD (sensor), to confirm that Fixed firmly, turn on the power, connected to the host or the scene using a monitor, small TV, etc. to adjust the aperture focus.3. Fixed surveillance cameras, take out the bracket, up plugs, screws, screws, cones, small hammers, drills, and other tools, in accordance with the location of the pre-determined position, mounted bracket. After checking firmly, the camera will be installed in accordance with the agreed direction.
3, the installation of the camera shroud, if you need to install the shroud, after the second step, directly from here to install the shroud. 1, open the shroud on the cover plate and the back of the baffle plate; 2, pull out the fixed metal piece, the camera is fixed; 3, the power adapter into the shroud; 4, reset the upper cover plate and the back of the baffle plate, straighten out the cables, fixed, and mounted to the stent.
4, install the camera BNC head or aviation head, insert the welded video cable BNC plug into the socket of the video cable, make sure it is fixed firmly. Surveillance cameras and their supporting devices, such as lenses, shields, brackets, wipers, etc., the installation should be firm, the operation should be flexible, should pay attention to anti-vandalism, and coordination with the surrounding environment.
5. Connect the power supply, insert the power output plug of the power adapter into the power socket of the surveillance camera, and confirm the firmness. In a strong electromagnetic interference environment, surveillance camera installation should be isolated from the ground insulation.
6, connect the video host, the other end of the cable into the control host or monitor (TV), to ensure firmness.
7, adjust the camera to the best position, turn on the power of the monitoring host and the camera, adjust the camera angle to the predetermined range through the monitor. In addition, the monitoring camera all control, display, recording and other terminal equipment should be installed smoothly, easy to operate. One of the monitor (screen) should avoid direct external light, when it is unavoidable, light avoidance measures should be taken. Equipment installed in the console, cabinet (rack) should be ventilated cooling measures, internal connectors and equipment should be connected securely.
03
Two, PTZ camera installation:
1, the preparatory work before installation: take out the camera, lens, power adapter, bracket, ready tools and accessories: glue plugs, screws, screwdrivers, hammer, drill and other necessary tools; according to the pre-determined mounting location, check the size of the glue plugs and tapping screws type, try a bracket screws and camera The base of the screw is appropriate, whether the pre-buried pipeline interface is handled well, test whether the cable is smooth, ready to enter the installation program.
2, take out the camera and the lens, in accordance with the pre-determined model and specifications of the camera lens, carefully load the lens, pay attention not to touch the lens and the CCD, to confirm that the fixed solid, connect the power supply, connect to the host or the scene using the monitor, small TV sets, etc. to adjust the aperture focal length.
3, open the shroud on the cover plate and the back plate, pull out the fixed metal plate, the camera is fixed, the power adapter into the shroud, straighten out the cable, fixed, mounted on the bracket.
4, take out the tools, according to the pre-determined position, mount the bracket. After checking firmly, the camera will be mounted in accordance with the direction of the drawing design, to determine the installation of the bracket before the installation of the location of the power test in order to get a more reasonable monitoring effect.
5, the welded video cable BNC plug into the socket of the video cable, with the plug's two notches aligned with the two fixed columns of the camera's video socket, inserted after the clockwise rotation can be, to confirm that the fixation is solid, good contact. Weld the power input of the power adapter firmly and well insulated, the power output plug into the power socket of the surveillance camera, and confirm the firmness, straighten out the cable and reset the cover of the shroud and the back plate.
6, the other end of the cable in the same way to access the DVR or monitor and other back-end equipment in the room, connect the back-end equipment in the room and the camera power supply, through the monitor to adjust the angle of the camera to a predetermined range, and adjust the focus of the camera lens and clarity, the next step can be into the video recording equipment and other control equipment debugging process.
04
Three, dome camera installation:
1, familiar with the product performance and get the product after we should be familiar with the technical parameters of the product as well as the use of precautions, such as how much the input voltage is, how much power, what are the functions, etc., as far as possible to do in mind.
2, in the installation of the dome camera should be checked and adjusted before the product, so that the camera is in normal working condition. If the camera does not work properly find out why and adjust the camera to work.
3, the installation method before construction, according to the environment and security, aesthetics and other starting point, the use of wall mounted or hanging installation.
4, the installation angle of the installation angle of the dome camera directly affects the scope of the monitoring image, so the installation needs to be more in accordance with the needs of the field to operate. Such as the installation of the cell door less than 6 meters, the camera's angle is recommended to be the best 30 ° - 60 °; if installed in the cash register, the camera's angle should be considered in the ± 15 ° - 20 ° and so on.
05
Four, computer camera installation:
1, you should understand your camera is driver-free, or need to be manually driven. Driver-free cameras can be plug-and-play, while driverless ones need to be installed manually, but of course most of them are driver-free.
2, take out the camera, and then plug the USB port into the port in your computer, if you use it for a long time, we suggest you plug the USB port of the camera on the top of the rear panel.
3, the first time you use, the system may search for drivers to install, drive-free can be recognized, not drive-free may also download the file to automatically install the driver, the next time you plug it in again will be much better.
4. Finally, debug the video device and see how it goes! Note: In Win7, the video screen needs a third-party software to display, so we can QQ to view the device working status, open the video debugging in the QQ panel.
5, switch to the video settings, wait a few seconds you should see the video screen. It shows that the video device started successfully, and you can see the screen on the successful completion.
6, if you need to install the driver manually, you can insert the CD-ROM that came with the camera into the drive to read the file for installation, or download the relevant driver on the Internet for installation.
7, after the installation is complete, you can test the work of the video device, if you encounter problems can not be installed or no driver, you can try to search in the device manager or contact the after-sales to get help.
06
Fifth, monitoring wiring:
1, monitoring wiring a little bit in advance to choose the appropriate wire, to ensure that the voltage is stable and does not affect the normal work of the camera.
2, the wiring route to pay attention to the surrounding environment, to avoid interference with strong magnetic fields, there is interference with the arrangement of shielding lines.
3, monitoring wiring must be strong and weak power separate wiring, each pipeline alignment, to prevent interference with strong electricity.
4, the video line in the middle can not have end nodes. Try not to appear in the middle of the power line connection point, in case there must be set up over the line box.
5, monitoring wiring must be well marked at both ends, to facilitate the commissioning work has been the future maintenance and repair.