The air shower room is an indispensable clean supporting equipment in the modern industrial clean plant, which can remove the dust on the surface of people and things, and at the same time play the role of buffer and isolation for the clean and non-clean areas on both sides of the air shower room. The equipment is widely used in food, medicine, biological engineering and precision electronics and other fields. The air shower room is divided into two categories: common type and interlocking type: the common type adopts the control mode of manually starting the blowing shower, and individual operators will choose the escape mode of "leaving without blowing shower". This makes it difficult to ensure the cleanliness of the air in the clean area. May even affect product quality.
Clean room, in the dynamic situation, bacteria and dust is the largest source of operators, when the operator enters the clean room, before the clean air must be blown with clean air dust particles attached to the surface of their clothes Thermal insulation sandwich panels is through the advanced automatic molding machine will be the color steel compression molding with a high-strength adhesive to the inside and outside of the two layers of steel (you can use aluminum, stainless steel or decorative panels) and self-extinguishing polystyrene foam board (also available in other fire-resistant materials). Foam board (can also be used for other fireproof materials) compressed and heated composite of the emerging building panels.
Heat-insulating sandwich panel beautiful appearance, color and luster of bright and diverse, lightweight and high-strength, rapid and convenient construction, assembled in panels, without large lifting equipment, no wet work. Set load-bearing, thermal insulation, fire prevention, decoration in one, without secondary decoration, can be widely used in large-span structure roof, wall, thermal insulation plant or thermal insulation and fire prevention plant, purification plant, cold storage, refrigerated trucks, container room Clean airtight light is divided into two types of ordinary and emergency type. Usually adopts the double tube form. Emergency type in normal circumstances can also be used as a normal type, in the case of a sudden power failure in the plant, it can be maintained to continue to light, and does not require a separate power supply system. In terms of materials, clean airtight and other stainless steel and lacquer type two, transparent and opaque mask points.