After the film is applied to the car, don't raise or lower the windows in 3 days in summer and 7 days in winter. Because the car just after the film, the glass is relatively tight, in the process of lifting and lowering the windows of the car film edge is easy to grind rolled up, damage to the film.
Generally speaking,
To pay attention to the following points:
1, the car film within three days after not lifting the windows, cloudy and rainy days on a few more days.
2, the car film within ten days after the opening of the air conditioning is prohibited to blow the front block.
3, the car after the film, film and glass between such as cloudy, this situation, do not worry, just paste the film in a certain period of time with the glass between the remaining moisture, it is recommended that the car is parked in the sun for a few days, generally within a week will gradually disappear.
4, such as film completely dry after you can clean the glass, with deerskin or special wipes can be gently wiped with water.
5, do not use suction cups or any adhesive products, pasted on the car film to prevent the film off the bubble.
6, do not use nails or sharp substances will be the edge of the film to avoid gray spots and other substances into the impact of aesthetic.
7, do not use brushes, dry and hard towels, etc. to wipe the surface of the insulation film on the windows to avoid scratching the film.
What do I need to pay attention to when applying solar film to my car?
Precautions:
1, the car after the film, three days to avoid lifting the windows;
2, three days do not wash the car;
3, three days with a sunroof of the vehicle in the driving, especially high-speed driving do not open the sunroof;
4, winter film, we recommend that you do not raise and lower the windows in a week, and do not wash the car. It takes about a month for the front and rear gears to dry out.
5, if you meet the membrane edge blistering, should be within 24 hours to the construction site for repair, more than time to deal with, because the bubble around the glue has dried, the membrane periphery has been unable to move, the treatment will certainly produce creases.
6, after the film within one month, prohibit the use of strong adhesive labels directly to the film, so as not to cause partial detachment of the film from the glass.
7, car film should also understand the city car inspection policy. In some cities, such as the front windshield and windshield outside the glass for the driver's visual area parts of the visible light transmission ratio of less than 70%, the annual inspection will not be passed. In the pasting of the film, the front window to leave a triangle area can not paste film, otherwise it will affect the normal vehicle inspection work.
What are the precautions that need to be paid attention to the car film?
1, the film should be viewed before the installation of the window glass is complete and intact and the integrity of the auto glass to ensure that the subsequent filming work can run normally. Be sure to cover the necessary parts of the car before applying the film to prevent liquid penetration.
2, the film before the window inside and outside surface cleaning. This is mainly to put an end to the construction quality of the film after the film insulation film and window glass between the presence of dirt or other objects to ensure that the film and glass can be combined.
3, do not lift the window within 3 days after the film.
4, the film can not be cleaned within a week after the film insulation film and open the defogging line switch.
5, do not use a solution containing alcohol or ammonia to clean the surface of the film.
6, after the film if there is a bubble must be within 24 hours to the construction store to deal with.
7, do not let the air-conditioning wind blowing against the membrane to avoid intense thermal expansion and contraction.
Expanded information:
1, professional automotive film should be used to specialize in sticker film Cleaning fluid and installation fluid, and diluted with pure water, so that the film and the glass to achieve maximum bonding strength, does not cause warping, delamination defects, to achieve long-term warranty effect.
2, auto glass film, which can not have any blemishes and debris particles, so professional installation must be in the dust-free film room construction! Dust-free room is not just a closed glass door isolated from the outside world, the interior should be equipped with a water mist shower head and air conditioning to achieve air dusting effect, the ground has a drainage gutter and special coatings, and further play a role in dust reduction.
Reference:
Car Film What are the precautions
Auto glass film construction after the notes:
1, be sure to go to the store review! Review! Review!
Many people think that the acceptance of the film affixed is the last process, in fact, a week after the review is the last link. First of all, some small problems will only be revealed after a week; Secondly, part of the film is required after a week of sealing treatment. For professional construction stores, after the review to confirm the OK, it is considered to be the real completion of the film construction, and the final delivery.
2, after the film if the film edge blistering, do not deal with their own, should be repaired within 24 hours to the store
Regular construction stores will also provide perfect after-sales service, once the film found that the problem, contact the construction stores to deal with it. And, the car film with professional tools with professional filming techniques, do-it-yourself treatment can not achieve the desired results, but also may cause more problems. And this part of their own human causes of the problem, in the back of the after-sales is not recognized.
3, 3-7 days after the film, please do not raise and lower the windows, so as to avoid damage to the film
4, if the film is affixed to some of the top models of the brand, such as the Dragon Film AVS70 or Wigu V40 and V70 film, please go to the store in 1-2 weeks to do sealing treatment!
In order to achieve a higher thermal insulation effect, some automotive insulation films are embedded with metal components, which need to be sealed to eliminate their contact with the air and avoid oxidation. Just after construction, the water vapor between the film and the glass needs to evaporate naturally, it is not suitable to seal the edge immediately, a week after sealing the edge is the more ideal state.
5, 1 month after the film do not start anti-fog electric heating wire
In the film pasted within a week, the film and the glass are not yet very good service, this time to open the heating demisting, is located in the glass and the film between the heating wire around the bubbles will be produced, can not be repaired.
6, after the film between the film in the glass, such as foggy water or water beads of water, please do not worry! This is the inevitable phenomenon of the drying process, by the sun 8-10 weeks will naturally disappear.
7, 2-3 months after the film, please do not suction cups on the film and other things
Precautions after the construction of car paint protection film:
1, 1 month after the sticker can not be washed
This time the film has not been fully adhered to the surface of the paint firmly. The impact of the high pressure water gun in the car wash is very easy to impact the edge of the warping, and even partial detachment. 1 month after the car wash do not use a high pressure water gun to the corners of the crevices excessive rinsing, invisible car coat imitation lotus leaf hydrophobic performance and resistance to oil and dirt resistance, so that the follow-up car wash has become very simple, and there is no need to use the high pressure water gun intensity of the cleaning.
2, mounted after 7-15 days or so to the store to review
The body of the edge of the body parts are more complex, in the absence of firm, complex car environment may cause, invisible car coat edge warping or loose and not easy to notice. The professional construction stores will generally after the stabilization of the whole car for customers to carefully review, and the edge of the location of the second edge work.
3, film 1-2 months after the bubble bubble do not deal with their own
For a small amount of bubble bubble, belong to the natural evaporation of moisture in the normal phenomenon. However, due to the car coat mounted area is large, the construction difficulty is also high, do not recommend owners to solve the problem by themselves, you can contact the construction stores by the professional film master to deal with.
The attention of the film?
One, clean the car two, paste sample selection film three, check the car condition four, dust humidification five, car protection six, check the cut film seven, clean the glass eight, bake the film stereotypes nine, film operation ten, check the posting of eleven, delivery of the vehicle process is not everything, but there is no good process or do not implement the process is never to take. Film want to do absolutely no dust is more difficult, but there are ways to minimize the dust particles affixed to the film, you need to do the work in the following areas: the first is to paste the film before rinsing the body, to avoid the body to carry dry dust into the construction workshop; the second is the construction of the closed workshop, the vehicle needs to be sprayed into the workshop to reduce dust particles suspended in the air; the third is to clean the glass as much as possible, reduce the glass on the There are dust particles; the fourth is to tear the film before the local dust, including their own hair and clothes, to avoid electrostatic adsorption of dust; the fifth is to grasp the skills when catching up with the water, to avoid vacuum siphoning caused by the glass edges, especially along the lower edge of the dust particles into the film.
Automotive film considerations of the book
Summer is coming, many car owners will choose to give the car film,
Automotive film considerations
Don't be greedy for cheap
Cheap automotive film may be fake, or substandard, the regular film products have the characteristics of the film just said, just pay more attention to the question of which effect, and the fakes! may not be able to bring you these features, but also may bring harm.
Many car owners believe that 4s stores give away the film, but we should note that the 4s stores may also be fake, so you must pay attention to identify the owners when shopping.
Pay attention to the film material
The film is also divided into a variety of stained film, metal film, nano-ceramic film, etc., the properties of each type of film are not the same, usually we use the nano-ceramic film, which is more common and cost-effective film, but pay attention to the store to the second best. The better is a different kind of metal film, some quality brands are available, transmittance, insulation, thickness are not the same, the price difference is also very large, owners can only choose according to their own needs and budget.
Choose a reliable store
Construction is an important factor in the film, and reliable workers are also very important, otherwise the film is either dust or bubbles, and then the good car film is also a waste of money, in addition to the film must be in a dust-free workshop, in the roadside stalls at random construction, when it can only be the pursuit of the rights of the right to behavior. Good construction is a strong guarantee of the effect of the film, so choose a professional construction store is very necessary.
Cautious film selection
Ordinary metal film paste will have signal shielding, driving our cell phone signal is not good, navigation can not search the satellite may be caused by the film. Dark-colored film is also try not to choose, a serious impact on the driving observation line of sight, after the car can not be observed through your window the road ahead. Finally, the mirror film, this kind of film has light pollution, will affect the safety of other drivers and is not beautiful.
Ranking of car film brands
1, Johnson JOHNSON
JOHNSON, the United States, is the world's film association advocate and an important member of since the 1950s, is committed to the development of ultra-safety, ultra-design of automotive explosion-proof film, the production of the annual production at an alarming rate of 50% growth in the quality of its automotive explosion-proof film has been in the world's leading position. The quality of its automobile explosion-proof film has always been in the leading position in the world.
2, Ray-Ban Letbon
Ray-Ban all the products are manufactured by the United States and Japan, the two film factories, insisting on the use of U.S. and Japanese imports of heat-insulating film, in terms of scientific and technological content, Ray-Ban's LB-895 and LB-915 is not metal as a heat-insulating material, so it will not be shielded from the cell phone, car remotes, satellite navigation, ETC and other optical Signal reception, to achieve high thermal insulation and does not contain metal components, as well as its internal reflectivity is very low, and has an excellent one-way perspective.
3, Quantum Quantum
Quantum is the world's top thermal barrier film brand, the world's magnetron sputtering film leader, has won two consecutive international AIMCAL technology awards, the International Window Film Association, one of the recognized producers, Quantum film insulation products are different from other products, since the birth of the brand that is based on the thermal barrier film, and combined with the market The actual situation of the development of a series of products, including high-end, mid-range market, automotive insulation film market more competitive brand.
4, Shangjia
Shangjia explosion-proof film production plant is the main member of the IWFA International Window Film Association, which has a film dyeing, vacuum aluminum plating, magnetron sputtering coating, anti-scratch plating, gluing interlayer, spectral particle screening and other advanced production processes. This brand belongs to the mid-range, due to late entry into the market, visibility in not very high, but the effect is very good, anti-scratch performance is also very good.
5, 3M
3M is headquartered in St. Paul, Minnesota, the United States, is a world-renowned product diversification multinational enterprises, 3M has been known for innovation in the world, a wide range of automotive explosion-proof film products, over the past hundred years, 3M automotive explosion-proof film products have been deep into the people's lives, from household goods to medical supplies, from transportation, construction to business, education and electronics, communications, and so on. Various fields, modern society, 50% of the world's people every day, directly or indirectly in contact with the 3M automotive blast film products.
6, Amber Optics HUPEROPTIK
HUPEROPTIK Amber Optics is the world's leading specialty chemicals company Eastman Chemical Company's brand, Amber Optics? s first and only multi-layer nano-ceramic insulation film, widely used in the marine, construction and automotive markets, bringing the window film industry into a new era.
7, dragon film LLUMAR
LLUMAR dragon film belongs to Eastman Chemical, with significant anti-scratch function, glass treatment film is synthesized by the polyester and metallized coating through adhesive a very thin film, this film is installed on the surface of the glass to provide significant sunlight protection performance, lllumar film's structure is very strong, it has the best industry anti-scratch function, and have the best scratch resistance of the industry and is backed by the best warranty system available.
8, Weigu V-KOOL
V-KOOL insulation film manufacturer is located in the United States Silicon Valley, Shaohua Technology, a unique spectral selection of technology so that the Weigu products in the industry has won the absolute leading market position, its insulation technology in 1999 by the world's largest science and technology magazine "Popular Science" as "one of the 100 great inventions of the millennium". Its insulation technology was selected by Popular Science, the world's largest science and technology magazine, as one of the "Top 100 Inventions of the Millennium" in 1999.
9, Kandex KDX
Kandex KDX is China's largest producer of pre-coated film, is China's first with independent intellectual property rights engaged in the research and development of pre-coated technology and pre-coated film production enterprises, Kandex Window Film's core competitiveness - one of the members of the International Window Film Association recognized producers, product quality has reached the international advanced level.
10, light to SUNAWE
Light to Rolls-Royce, Lincoln, Mercedes-Benz, BMW, Audi, Land Rover, Jaguar and other luxury cars with the top thermal insulation to date, light to the light in addition to international excellent quality products, but also for the customer to provide high-end supporting services, so that owners feel unique and respected experience, light to the more than 400,000 luxury models. The price of the product is the highest in the industry, and the insulation performance is the best, but the general car owners may not be able to accept such a high price.
Car film tips
Decide to film, choose the weather
As the saying goes: "Go out and watch the sky. We go out to do business, traveling, traveling, business shopping, etc., are closely related to changes in the weather. To the car film should also look at the day, cloudy days and rain is the most suitable film weather. Because in the cloudy days and after the rain, the air is more humid, less suspended, this time the film will not appear because of impurities and affect the beauty. Many car owners know, paste explosion-proof film to go to the indoor film conditions of the decorative store, before the film, the professional decorative store will also be appropriate to maintain indoor humidity, to avoid dust caused by the film with gravel, bubbles and scratches. However, most car owners may not realize that cloudy days and rainy air humidity, static electricity is reduced, indoor and outdoor dust is also significantly reduced, which is the best time to stick the film. It is important to remember not to apply the film in dusty weather and environment.
Shopping for a car film, identify the authenticity
Currently on the market a wide range of car film, the quality of good and bad. Laymen car owners are not paying attention, it is inevitable to be cheated, spend a high price but bought a poor quality film or fake. Do not know, poor quality film not only jeopardize the safety of driving, but also easy to cause hidden glass and even affect the health of the driver. Car owners decide to give their car film, in the purchase must pay attention to the following points to distinguish between genuine and fake explosion-proof film.
1, clarity. High-quality film transmittance can be as high as 90%, and regardless of the color shades, the night can clearly see 6 meters away from the object, while the poor quality film will have a foggy feeling;
2, feel. Genuine film feel thick and smooth, and inferior film feel thin and brittle, easy to wrinkle;
3, color. High-quality film pigments are uniformly fused in the film, durable, not easy to change color, while the poor quality of the film color in the adhesive role of the adhesive glue, tearing off the film liner with a fingernail scrape, the color fell;
4, taste. Inferior membrane adhesive layer residual solvent high benzene content, odor, will seriously endanger the health of the owner;
5, bubbles. Tear off the plastic lining of the film, and then re-composite, low-quality film will bubble, while the quality of the film composite intact;
6, shelf life. General production of regular manufacturers of film have a long quality assurance period, usually 5 years.
The film store, the requirements of the regular
Good products are important, but the process of film can not be ignored. It is crucial to choose a store with high reputation and good service. Generally formal automobile beauty store equipped with professional film workshop, because the film process must ensure relatively dust-free, cool. Car owners do not want to save money, go to choose some roadside stores, and even choose some unreliable black store, which will not only cause the film quality can not meet the requirements, but also may be on the car body and car glass damage, the loss is not worth it. Because the film is most afraid of dust and gravel, street work is difficult to do environmental cleanliness.
Car owners in the film before, you can go to the decorative store to browse around to see whether the store is neat, the ground is clean? Whether with explosion-proof solar film manufacturer's authorization certificate? The service level of the film technician is over the top? Whether to set up a special film construction workshop? Is there any dust spraying equipment in the workshop? If you have a car that is being laminated, you can also observe the construction process, whether the construction process is smooth and rigorous?
Preparation, essential
As the saying goes, "no harm, no foul", everything should be considered first comprehensive point. Before the film, the first thing to do is to protect the car facilities, with a plastic cover to cover the car seat and dashboard. Film, do not use easy to make the film discoloration of the lubricant, but also can not be in direct sunlight in the case of film, because the film is easy to stick wrinkled blisters, greatly affecting the image of the car's beauty.
Front and rear windshield, to the whole posting
Require the store to paste the front and rear windshield is best not to open the knife, to the whole posting, otherwise it will lose the explosion-proof, and affect the beauty. Professional technology is how to do it? The car's rear windshield glass is curved, imported cars with large glass, the curvature is also greater, professional technology is the solar film according to the rear windshield size of the whole sheet cut, with special tools and heat guns in the rear windshield outside the film baked into the same curvature with the rear windshield glass, and then to the inside of the car to paste.
Acceptance, must be careful
After the whole car after the film, the car owners have to sit in the car to observe whether the color is uniform, whether there are bubbles, whether the gravel is too much, and from a variety of angles to the outside of the car film whether it affects the line of sight. You can also lower the windows to see whether the knife work of cutting film is neat and rounded, and whether the edge of the process is similar in size.
So "warranty card", keep the documents
As the saying goes, "no proof", if the buyer and seller initially reached a verbal agreement, and there is no written evidence, which will cause inconvenience to the future responsibility. When handing over the car, the owner must find the store to ask for a formal product quality assurance card. Some brands of film have a film warranty card, remember to ask the merchant for. There is no warranty card film must also keep a variety of documents invoices, so that when there is a problem can be used as evidence to find merchants "theory".
After the film, be careful to protect
After the car film is completed, pay attention to the side window in the film after 24 hours in summer, 48 hours in winter, do not open, and do not use fingernails or sharp objects will be the film edges open, so as to avoid the entry of dirt. If there are bubbles, go to a professional car beauty care store within 24 hours.
After two weeks, can be cleaned
The film can be cleaned after 2~3 weeks, to use non-linting cloths and other soft items dipped in water with detergent to wipe, pay attention not to clip into the gravel or sharp particles, so as not to scratch the surface of the film, and at the same time can not be washed with the ammonia often liquid. After applying the film, if there is any cloudy water mist between the film and the glass, it will naturally dry out and disappear within 2~3 weeks. Paste the film of the car after the car wash, because the car wash towel will generally have some fine sand, rubbed will damage the film surface, so try not to use the car wash towel to wipe the glass, but their own preparation of a soft towel to wipe.
Prevent self-explosion, wash the car with caution