1. When we notice that the inlet and outlet directions of the oil mist nozzle cannot be reversed, we should pay attention to the details.
Before installation and use, the oil, dust and other sundries in the pipeline must be cleaned, and the fragments of sealing materials must not be mixed.
2. Maintenance of oil mist generator
For better maintenance, the oil mist sprayer does not need to be set too high.
3. Installation position of oil mist injector
In the triple, the oil mist nozzle is installed behind the compressed air filters and the pressure regulating valve, which can effectively prevent water from flowing into the emulsified oil in the cup and being polluted by the oil to the orifice of the pressure reducing valve.
4. Matters needing attention in the use of oil mist device
A. In order to prevent oil dripping, the air flow needs to reach the minimum value of atomization flow.
B in the circuit without oil supply, in order to prevent backflow, it is necessary to install a one-way valve at the shunt.
Matters needing attention in the installation and use of oil mist ejector, and the oiler should be constantly oiled when used. What needs attention here is to prevent oil injection and oil plug from flying out. When refueling the oil mist ejector, slowly loosen the oil plug and let the pressure in the cup be completely discharged before disassembly.