How to disinfect electronic equipment such as household appliances?

Common household appliances, electronic products, office equipment, etc. The surface should be cleaned, the inner wall decontaminated and disinfected. It is suggested to choose antibacterial agents, disinfectants, detergents, sterilized paper towels and other treatment methods that are harmless to human body and have no side effects, combined with high-temperature boiling physical methods.

You can also choose peroxide disinfectants, bacteriostats, detergents, detergents, etc. Contains chlorine dioxide and hydrogen peroxide (hydrogen peroxide) to clean and disinfect surfaces. However, it is not recommended to use alcohol and 84 disinfectant in large quantities. Chemical disinfectants used for surface disinfection and inner wall decontamination and disinfection. It is strictly forbidden to directly use explosive and flammable chemical reagents such as chlorine dioxide and hydrogen peroxide for disinfection.

Configuration method of common household disinfection and sterilization liquid

Preparation method of disinfection and sterilization solution of 1 and 84 disinfectant

Configuration method: Pour two bottles of 500 ml mineral water, that is, one liter of cold water, into the basin, then pour a bottle cap containing 5% 84 disinfectant according to the instructions, that is, 10 ml, and then mix evenly to prepare 500 mg per liter of disinfectant.

2. Configuration method of disinfection and sterilization solution for chlorine disinfection effervescent tablets

Configuration method: Add 500mg effervescent tablets into one liter of water, and mix them evenly after the effervescent tablets are completely dissolved. 500 mg per liter of disinfectant can be prepared.

3. Preparation method of chlorine-containing disinfection powder disinfection solution

Configuration method: Choose chlorine-containing disinfection powder with effective content of 55% or 65%, weigh one gram of disinfection powder according to the instructions, pour it into a basin, add 1. 1 liter of water, and mix evenly to complete the configuration of 500 mg per liter of disinfection and sterilization solution.