Small garbage incinerator
Second, the product features:
1, well-designed, small footprint, the use of simple rain shelter.
2, simple operation, easy maintenance, operation mode: continuous operation.
3, energy saving, safe and reliable, automatic ignition . Adopt diesel combustion.
4, low price, long operating life.
5, exhaust gas treatment: high temperature + high temperature jet air vortex combustion + secondary combustion + cyclone dust collector + chimney.
6, the design of the average calorific value: 2500Kcal / Kg.
7, the furnace pressure: the use of negative pressure design, not backfire
Three, the safety indicators:
1. Before stopping the operation of the device has a combustion chamber cooling program detection, so that the temperature of the combustion chamber falls to the set temperature, the incinerator to stop all operations.
2. Control cabinet and each control device has a connection between the protection device to avoid leakage, in the relative humidity of 85%, the electrical circuit insulation resistance is not less than 24MΩ, and there is a shift ground to transmit the leakage of power. Connected outside the line with metal hose protection.
3. This equipment has been verified by the technical department after the factory, the oil circuit, gas circuit and other installations are very solid, and after the pressure test, there is no leakage phenomenon.
Small garbage incinerator
Four, the composition of the incineration device includes:
Furnace body primary combustion chamber, secondary combustion chamber, cyclone dust collector, chimneys, flue, piping system, high-pressure blower, secondary pressure induced draft fan, primary burner, secondary combustion machine, and the electronic control cabinet, temperature display device, detection devices.
Combustion process and brief description:
Waste is manually put into the primary combustion chamber of the furnace body, the automatic temperature control opens the primary combustion, according to the principle of combustion of the three T (temperature, time, vortex), in the combustion chamber of the furnace body to fully oxidize, pyrolyze, combustion. The flue gas produced by incineration enters the second combustion chamber, and the unburned harmful substances in the flue gas are further destroyed in the second combustion chamber. In order to make the unburned material completely decomposed, to meet the emission requirements, the second combustion chamber set up a burner combustion, configured with a unique secondary air supply device to ensure that the flue gas at high temperatures with the full contact of oxygen, while ensuring that the flue gas in the second combustion chamber of the retention time and according to the second combustion chamber of the oxygen content of the flue gas outlet for adjusting the amount of air supply. Two combustion chamber temperature control and through the dust collector to remove particles of larger dust, so that its incineration efficiency and destruction of the removal rate of 99% or more, so that it achieves the effect of no odor, no bad taste, no smoke, to meet the national emission standards, and then into the chimney emissions into the atmosphere, combustion of the ashes produced by the manual take out, sieving, transfer and burial.
Small waste incinerator
Fifth, the scope of application:
1, industrial waste (polymer waste): plastic PE, PU, rubber (tires), Polycarbonate, Bowtie bottles, fibers, foam, cloth, resin, acrylic, leather, cowhide scraps, plywood, bakelite, powdered urea powder, rags, cassette tapes, paints, polymers and so on.
2, medical waste: syringes, gloves, bandages, gauze, blood transfusion vessels, organs and other infectious waste.
3. General garbage: cardboard, paper shavings, wood shavings, leaves and so on.
4, special waste: waste oil, waste solvents, sludge, dust collection pool, paint on iron, mold filter residue, etc..
Sixth, the advantages of the furnace description:
Design life: incinerator can meet the needs of all-weather operations, continuous operation and intermittent operation, the annual operating time of not less than 8,000 hours, the design life of more than 10 years.
The furnace body shell for the steel structure, the inner wall for the different nature of the refractory casting materials, the inner layer of high-temperature-resistant casting material, can withstand high temperatures of 1790 ℃, the middle of the lightweight refractory materials, not only to ensure that there is enough combustion temperature inside, but also to keep the shell low temperature to prevent scalding, refractory casting as a whole, not easy to fall off, not easy to corrode