At present, the implant systems used in well-known domestic medical institutions can be seen as Nobel Replace, Nobel Branemark, Friadent, Straumann, 3i, Ankylos, Bicon, Lifecore, Endopore, Bego, Osstem, BLB, CDIC and so on. .
World Implant Ranking 1. bicon USA
Bicon dental implant technology developed by Bicon USA, its unique design and revolutionary clinical technology has been proven by clinical results since 1985, the first Bicon implant was implanted in 1985 and has been in use since then.
Bacom implants are made of pure titanium, which is highly compatible with human bone, making it a simple and reliable implant system.
The system uses a 1.5° bacterially closed conical locking post to realize the connection between the implant and the abutment, which is made into a cylinder similar to a tooth root, and is implanted into the alveolar bone of the missing tooth area by means of a minor surgical procedure. Its unique threaded structure design, after rigorous biomechanical analysis and testing, naturally increases the surface area while distributing the force through the threaded off structure, so it has stronger retention and stability, has the function of normal mastication like a real tooth, and has a very lifelike appearance, and does not cause extrusion damage to the normal teeth on both sides.
Another technological highlight of Biocare implants is their ability to offer a wide range of exceptional and personalized designs to achieve outstanding aesthetic results, with short implants, extra-orally bonded crowns, or Biocare One-Piece Abutment Crowns that do not require screws and adhesives, whichever you choose to ensure the natural shape of your gums and the beauty of your smile.
Professor Thomas Driskell, developer of the Bicon Implant System, states that "the design of an implant determines its clinical capabilities. The unique design of Bicon is a revolutionary departure from traditional design concepts and is the only implant system of any brand that has been stable for 30 years and can be used on a large scale without change". of any brand of implant system that has been stable for 30 years and can be used on a large scale without change."
Bicon's Unique Design
1) Implant Fins
The fins allow the implant to have approximately 30% more surface area than a similarly sized screw-type implant and help the surrounding Harvard bone to carry the vertical occlusal forces, allowing the formation of a centralized, vascularized cortical bone around the implant. Studies have shown that osseointegrated implants utilizing a multilayered finned design are more effective at transferring loads to the surrounding bone. This design inherently provides better occlusal force distribution and conduction than screws or other mechanical structures used by other implant manufacturers.
2) 1.5° Tapered Lock Implant-Abutment Connection
The gap is less than 0.5 μm, providing complete bacterial containment and 360° positioning of the abutment.
3) Platform Interchangeability
The same diameter abutments can be fully interchangeable.
④Sloping shoulder design of implant
Provides sufficient space for the growth of interdental bone and papillae, which improves gingival aesthetics.
⑤Integrated Abutment Crown (IAC)
The implant crown is made directly on the abutment using polymerized porcelain.
As you can see, the design of Bicon is really novel. In the process of surgical operation, it is also a unique low-speed hole preparation drilling machine, and does not require water spray; for intermaxillary distance is too large for the implant, it can not be subject to the restrictions of the crown-root ratio shall not be greater than 1, and even the length of the crown can be greater than the length of the implant; in the implant and the neighboring teeth or neighboring implant spacing, it can be less than 1mm. conventional implants in the crown restoration, if encountered chipping porcelain, poor contact with the neighboring surfaces, After the crown restoration of conventional implant, if it encounters chipping, poor contact with neighboring surfaces, gingival recession exposing the abutment, etc., it is an accident that makes the implant doctor worry and it is tricky to deal with it. However, since Bicon's crown and abutment adopt the integrated design and the connection with the implant is not a screw fixation or a bonding fixation, it can be easily removed from the implant by using the special pliers or sent to the mechanic's office to be re-repaired, or dealt with by the clinician. Because Bicon's crowns are made of new-generation Ceramage polymerized porcelain from Matsukaze in Japan, which can be light-cured intraorally, they are also quite easy to repair.
The Bicon system allows the surgeon to consistently achieve aesthetic and functional restorations for patients, so they can truly enjoy the benefits of dental implants that look and feel like natural teeth. In addition, intraoral odors associated with the use of screws can be avoided.
In short, the Bicon Implant System is designed to be truly unique, in keeping with the highest level of simplicity, stability, and ease of maintenance that implant dentistry seeks to achieve.
World Implant Ranking #2: ITI Implant System from the University of Bonn and the Straumann Institute, Switzerland
The system is manufactured by the Swiss company straumann, and the ITI is an academic institution engaged in research and training, so the system should be called the Straumann Implant System to be exact. The most important thing that affects the recognition of implants is the operation, as the saying goes, "Simple do more", the simpler the operation, the more user-friendly it is, and the higher the recognition will be. From this point of view, the Straumann system is being used more and more at home and abroad.