A:
Nickel wire mesh is mainly used for sieving and gas and liquid filtration under acid and alkali environmental conditions and for separation of other media. Among the woven nickel wire mesh there are five methods: plain weave, twill weave, plain Dutch weave, twill Dutch weave and reverse Dutch weave. The specification of nickel wire mesh is 1 mesh - 330 mesh.
1, plain nickel wire mesh:
It is the most common weaving method, the main feature is that the density of warp and weft wire diameter is the same.
2, pure nickel nickel square mesh network
Nickel square mesh is suitable for petroleum, chemical, chemical fiber, rubber, tire manufacturing, metallurgy, medicine, food and other industries, nickel wire woven into a variety of specifications of the mesh, cloth, has a good resistance to acid, alkali, high temperature resistance and other properties.
3, pure nickel wire mesh
Material: nickel wire weaving: plain weave nickel wire mesh, twill weave nickel wire mesh, bamboo flower weave nickel wire mesh performance: stable filtration performance, fine and other characteristics. Uses: Used in aerospace, petroleum, chemical and other industries.
Nickel wire mesh is classified according to weaving: 1, plain weave 2, twill weave 3, plain Dutch weave 4, twill Dutch weave
Nickel wire mesh specification 1 mesh--330 mesh.
Material-n6
Use: Used for sieving and filtration under acid and alkali environmental conditions.
One, nickel wire woven wire mesh
Weaved from nickel wire warp and weft cross weaving, the mesh is generally square holes.
Mesh: 1-200 mesh
Nickel wire material: Ni4, Ni6, nickel-chromium alloy wire, nickel-copper alloy wire
Width of the mesh and the length of the mesh, as well as the special specifications can be customized according to requirements.
Two, nickel plate (or nickel foil) stretched wire mesh
By the nickel plate or nickel foil by mechanical stamping and stretching, mesh holes for the diamond-shaped holes.
The length and width of the mesh and other special requirements can be customized according to customer requirements.
Three, nickel plate (or nickel foil perforated wire mesh)
Machined from nickel plate or nickel foil
Thickness of mesh: 0.04-9mm
Width of mesh: 4mm-1200mm
Holes: round holes, oblong holes, half-round holes, square holes, rectangular holes, a hole, triangular holes, hexagonal holes, rhombus holes, trapezoid holes and so on
Other specifications can be customized upon request. p>Other specifications can be customized upon request.
B
Monel wire mesh is a nickel-based alloy material with good corrosion resistance in seawater, chemical solvents, ammonia, sulfur, chlorine, hydrogen chloride, various acidic media such as sulfuric, hydrofluoric, hydrochloric and phosphoric acids, organic acids, alkaline media, salts and molten salts.
Monel wire mesh is also known as,monel filter,monel mesh. Used in chemical and petrochemical as well as marine development and other fields. Can be used to manufacture a variety of heat transfer equipment, boiler feed water heater, a variety of pressure vessel equipment. Petroleum and chemical pipelines, containers, towers, tanks, valves, pumps, reactors, shafts and so on.
C,
Nickel-chrome wire mesh is also known as nickel-chrome alloy mesh, nickel-chrome alloy wire mesh , nickel-chrome alloy mesh , nickel-chrome alloy filter mesh.
20 mesh-200 mesh
Wire diameter: 0.1-2mm
Width: 0.1-1.5 meters
Length: 30 meters/roll
Special specifications can be customized.
Superior elongation, compressive strength, surface finish, oxidation resistance, sulfur resistance, resistance to penetration. Repeated bending times, resistance and temperature coefficient is stable, allow high surface load, light weight and economic and reasonable price.
Widely used in aerospace, shipbuilding, military industry, chemical machinery, electric power, seawater desalination, medical equipment and other fields in the development of the national economy has an important position and role.