Methods/steps
1, install household water purifier accessories.
Before installation, check whether the accessories are complete, check whether all the pipes, joints, faucets and other wading accessories of the household water purifier are complete, and assemble the products that need to be assembled on site after unpacking. Some household water purifiers need to install special faucets, such as water purifiers and direct drinking machines, while water purifiers and water softeners do not. Most water purification faucets use gooseneck faucets, which are generally installed on the kitchen conditioning table and need to be perforated for installation.
2. Install the host of household water purifier.
When installing the water purifier, insert one end of the unsealed reverse osmosis membrane with two black "O" rings into the reverse osmosis membrane tube until it feels inserted into the bottom, and then tighten the end cover of the reverse osmosis membrane tube. Subsequently, the PE tube at the inlet of RO membrane tube was removed, put into a container, connected with water source and power supply, so that the first three pretreated filter shells were filled with water and black primary filtered water flowed out. Turn off the power supply after the black water is used up, and then put the removed PE pipe at the inlet of the reverse osmosis membrane pipe back in its original place.
3. Connect the water inlet tee
After installing the main unit of household water purifier, connect the water inlet tee. Turn off the main tap water switch, wrap the threaded inlet of the ball valve several times with the raw material belt, and then directly connect it to the side hole of the water inlet tee, and connect the PE pipe to the outlet of the ball valve.
4. Connect the water inlet, water outlet and sewage outlet.
Measure the distance and cut the PE pipe. The water inlet tee is connected to the PE pipe and then to the water inlet of the household water purifier. Connect the PE pipe to the water inlet of the main machine, and the water inlets of the integrated machine and the box water purifier are located outside the machine. Connect the PE pipe to this post-activated carbon, and this is the water outlet. When connecting the sewage outlet, the connecting pipe here should be opened once a month, 10 minute.
5. Flushing and debugging
Then turn on the switch, drain water for 20 minutes for flushing, and some black water will come out. This is normal. This is a small amount of charcoal powder. Don't drink water for a day or two. Put more water, the water quality will be more stable, and you can drink it directly.
Matters needing attention
The installation method of household water purifier is professional, and it is generally installed and debugged by specialized technicians.
Question 2: Reverse osmosis water purifier. How to install RO water purifier installation manual
I. Installation sequence
Automatic reverse osmosis running water machine is a kind of facility which is automatically controlled by microcomputer and can effectively treat terminal tap water. It is convenient to install and use. When you buy or install this machine for users, in order to ensure the installation quality, in general, you can install it in the following order: install RO membrane → fiber filter → granular activated carbon filter → precision activated carbon filter → punching hole → install the main engine → close the main valve → install the water inlet tee → install the water inlet pipe → check whether the water is leaking → install the ball valve on the water storage tank → gooseneck faucet → gooseneck faucet to the rear outlet carbon tube → waste water ratio to the sink pipe. → Stick the water pipe at the front end of activated carbon → Turn on the power supply → Check the water quality → Connect the ball valve water pipe to the water storage bucket after the water quality is qualified and stable → Make water → Drain water → Make water again → End the installation.
Second, the installation of the cabinet type running water machine
(1) Install reverse osmosis membrane.
Take off the RO film packaging film, take off the water pipe at the cover of the RO film shell, unscrew the cover of the RO film shell, insert one end with two rubber sealing rings into the stopper in the RO film shell and rotate it to the end. First move the sealing ring of the end cover of the membrane shell to the thread stop of the RO membrane shell, then tighten the shell cover by hand, install the water pipe and tighten it.
Check whether the elbow at the end cover is loose. If it is loose, remove it, wind the raw material tape for 2-3 times, and then screw it on as it is.
Special attention: wash your hands before unpacking RO membrane, and keep your hands clean during installation to avoid polluting RO membrane.
(2) Install the filter element
Remove the plastic packaging film, and insert the fiber filter element, granular activated carbon filter element and precision activated carbon filter element with double sealing rings into the filter cap interface in turn. Apply a little white vaseline around the O-ring on the filter bottle, screw on the filter bottle and tighten it by hand. When using a special wrench, the tightening force should be uniform and not too large.
(3) Install the fixed host
1. wall hanging: punch two holes with a diameter of 8 mm at the selected installation location. Put in the self-contained plastic expansion bolt, screw on the screw, hang up the main engine and tighten the screw.
2. Installation in the cabinet: there is no need to punch and fix, just choose the right position and be stable.
Whether it is installed on the wall or in the cabinet, the convenience of replacing the filter element and maintaining it in the future should be considered. Especially when installed in the cupboard, the water dispenser should be installed outside the cupboard door.
3. Install gooseneck faucet: Install it at the location selected by the customer. If the gooseneck faucet is to be installed on the kitchen conditioning table, drill a hole with a diameter of 12 mm on the conditioning table. If the gooseneck faucet is installed on the wall, two holes with a diameter of 6 ~ 8 mm should be drilled at the selected position according to the hole spacing of the bracket, plastic expansion bolts should be inserted, the bracket should be fixed on the wall with self-tapping screws, and then gooseneck faucets should be installed in turn.
When drilling holes on the marble table, a special drill should be used and positioned with a positioning plate. When drilling holes in imitation marble (synthetic material), ordinary twist drills should be used. These two kinds of holes are drilled by ordinary hand drills, and impact drills must not be used.
4. Install the upper ball valve of the water storage barrel: wind 6~8 times of sealant tape on the thread of the water storage barrel, screw in the upper ball valve, and then tighten the upper ball valve by hand. Put the water storage bucket in a proper position.
5. Install gooseneck faucet: When installing gooseneck faucet, enlarge the soft apron on it, put the small soft apron, hard rubber pressure plate and metal washer on the bottom in turn, and then tighten the nut. (figure)
6. When installing a water pipe on a running water machine, a plug must be installed at the end of the pipe to prevent water leakage.
(4) Connect the water pipes of the water machine parts
1. Tap water pipeline
Close the indoor main valve. Install the water inlet tee and water inlet straight-through (with random belt) at the water supply position selected by the user, and install the rear water parts. These three parts should use sealant tape to prevent water leakage.
2. Water pipes on board
The nut of each interface on the host machine is marked with the name of the connecting part, and the installer should know it in advance. The water pipe carried by the flow machine is 5 meters, so the user should consider the service length of each part of the water pipe, and both ends of each butted water pipe should be cut neatly.
3. Water inlet straight fiber filter cap water pipe:
Water inlet straight-through: loosen the fixing nut of the water inlet ball valve, insert the water pipe into the nut, insert the water pipe into the outlet (to the bottom) of the water inlet straight-through, and then tighten the nut to put the water inlet straight-through in the closed position. Connect the other end to the upper end of the filter cap of the fiber filter element (random plugs should be used at the ends of all water pipes, insert the pipes into the bottom and tighten the plastic nuts by hand).
......& gt& gt
Question 3: How to install the reverse osmosis water purifier? You should look for after-sales service.
The installation of the water purifier is very complicated.
And often after-sales.
It is suggested to find a company that integrates sales, installation and after-sales
Question 4: Installation method of Midea mro 103_4 reverse osmosis water purifier The box should be equipped with a wrench. After closing the water valve, drain the water, unscrew the PP shell with a wrench and put it back.
Question 5: What are the installation steps of ro reverse osmosis household water purifier? What are the installation steps that Smayne reminded reverse osmosis pure water machine?
Infiltration water purifier is the most common water treatment equipment, with the largest cumulative sales so far. Many customers engaged in water purification equipment, the first step is to install reverse osmosis pure water machine. As long as a water purifier can be installed well, it means that your water purification has begun. As one of the top ten water purifier manufacturers in China, Smain will explain the installation method of RO water purifier.
Reverse osmosis pure water machine is a facility for effective treatment of terminal tap water by reverse osmosis technology, which is convenient to install and use. When you buy or install this machine for users, in order to ensure the installation quality, in general, you can install it in the following order: install RO membrane → fiber filter element → precision activated carbon filter element → fiber filter element → punching hole → install main engine → close main valve → install water inlet tee → install water inlet pipe → check whether there is water leakage → install ball valve on water storage tank → gooseneck faucet → gooseneck faucet to rear carbon outlet pipe → waste water ratio to water tank pipe → rear activated carbon front pipe.
Install the under-cabinet water purifier
(1) Install reverse osmosis membrane.
Take off the RO film packaging film, take off the water pipe at the cover of the RO film shell, unscrew the cover of the RO film shell, insert one end with two rubber sealing rings into the stopper in the RO film shell and rotate it to the end. First move the sealing ring of the end cover of the membrane shell to the thread stop of the RO membrane shell, then tighten the shell cover by hand, install the water pipe and tighten it.
Check whether the elbow at the end cover is loose. If it is loose, remove it, wind the raw material tape for 2-3 times, and then screw it on as it is.
Special attention: wash your hands before unpacking RO membrane, and keep your hands clean during installation to avoid polluting RO membrane.
(2) Install the filter element
Remove the plastic packaging film, and insert one side of the fiber filter element, granular activated carbon filter element and fiber filter element with double sealing rings into the filter cap interface in turn. Apply a little white vaseline around the O-ring on the filter bottle, screw on the filter bottle and tighten it by hand. When using a special wrench, the tightening force should be uniform and not too large.
(3) Install the fixed host
1. wall-mounted installation: drill two holes with a diameter of 8 mm at the selected installation location. Put in the self-contained plastic expansion bolt, screw on the screw, hang up the main engine and tighten the screw.
2. Installation in the cabinet: there is no need to punch and fix, just choose the right position and be stable.
Whether it is installed on the wall or in the cabinet, the convenience of replacing the filter element and maintaining it in the future should be considered. Especially when installed in the cupboard, the water dispenser should be installed outside the cupboard door.
3. Preparation for installing gooseneck faucet: Install it at the location selected by customers. If the gooseneck faucet is to be installed on the kitchen conditioning table, drill a hole with a diameter of 12 mm on the conditioning table. If the gooseneck faucet is installed on the wall, two holes with a diameter of 6 ~ 8 mm should be drilled at the selected position according to the hole spacing of the bracket, plastic expansion bolts should be inserted, the bracket should be fixed on the wall with self-tapping screws, and then gooseneck faucets should be installed in turn.
When drilling holes on the marble table, a special drill should be used and positioned with a positioning plate. When drilling holes in imitation marble (synthetic material), ordinary twist drills should be used. These two kinds of holes are drilled by ordinary hand drills, and impact drills must not be used.
4. Install the upper ball valve of the water storage barrel: wind 6~8 times of sealant tape on the thread of the water storage barrel, screw in the upper ball valve, and then tighten the upper ball valve by hand. Put the water storage bucket in a proper position.
5. Install gooseneck faucet: When installing gooseneck faucet, enlarge the soft apron on it, put the small soft apron, hard rubber pressure plate and metal washer on the bottom in turn, and then tighten the nut.
6. When installing a water pipe on the water purifier, a plug must be placed at the end of the pipe to prevent water leakage.
(4) Connect the water pipes of the water machine parts
1, water pipe
Indoor main valve. Install the water inlet tee and water inlet straight-through (with random belt) at the water supply position selected by the user, and install the rear water parts. These three parts should use sealant tape to prevent water leakage.
2. Water pipes on board
The nut of each interface on the main engine is marked with the name of the connecting part, and the installer should know it in advance. The water pipe carried by the water purifier is 5 meters, so the user should consider the service length of each part of the water pipe, and both ends of each butted water pipe should be cut neatly.
3. Direct water intake-fiber filter element filter cap water pipe
Water inlet straight-through: unscrew the water inlet ball valve ... >>
Question 6: How to install the reverse osmosis water purifier? You can read the instructions or ask the technical staff of the manufacturer.
Question 7: Who knows the installation steps in reverse osmosis pure water machine? Hello: before installing the membrane element: the system pipeline needs to be washed: if it is a brand-new system, the system pipeline needs to be fully washed before installing the reverse osmosis membrane to prevent debris, solvent or residual chlorine from contacting the membrane element. Rinse it clean and you can move on to the next step.
1. Installation of membrane element: firstly, wash it fully with pure water.
2. Confirm that the O-ring is installed at the designated position of the connector.
3. Dismantle the end plate installation membrane elements on both sides of the pressure vessel.
4. After confirming the adapter connection of the pressure vessel, connect the concentrated water side end plate with the membrane shell.
After the installation of the concentrated water side end plate is completed, the membrane element should be pushed from the inlet side to the concentrated water side again to ensure complete and tight connection, and then the inlet side end plate should be installed.
The above contents are provided by Hebei Guoneng Water Treatment. Have you learned? I hope it will help you, and you can adopt it. thank you
Question 8: Hello, I want to ask a question. There are three factors that affect the installation of reverse osmosis water purifier: 1, and the kitchen has power supply; 2. The kitchen has sewers or floor drains, and 3. The space in the cupboard.
Question 9: How to install the ice maker and ro reverse osmosis water purifier? How to choose a water purifier? Experts from Shijiazhuang Bi Haubert Environmental Protection Engineering Co., Ltd., a designated enterprise for formaldehyde detection and treatment in Shijiazhuang, will give you advice-there are many kinds of high-tech products involving water, but they are not so magical. The content of wading products with disease prevention and treatment functions is explicitly prohibited by the state. Drinking pure water for health care is not reliable. Be careful when buying. Experts remind you to read the "ID card" to distinguish the authenticity of the product.
On the morning of March 18, the "Working Conference on Special Supervision and Inspection of Waterrelated Products" was held in the Municipal Health Supervision Office. At the meeting, the brands and models of 13 unqualified wading products were notified, and representatives of various businesses and manufacturers in the urban area signed a letter of commitment on safety sales. Are there any unqualified wading brands in our market? How to choose wading products? Professionals from Shijiazhuang Bi Haubert Environmental Protection Engineering Co., Ltd., a designated enterprise for formaldehyde detection and treatment in Shijiazhuang, answered this question.
13 unqualified brand models did not flow into our market.
Water-related products refer to products related to the hygiene and safety of drinking water, including plastics, pipe fittings and water quality processors that come into contact with drinking water during the production and supply of drinking water. Among these wading products, water pipes, drinking fountains and water purifiers are commonly used in citizens' homes. Recently, the General Administration of Quality Supervision, Inspection and Quarantine announced the list of unqualified models and enterprises of water purifiers, involving three brands: Shi Baokang, Meifeite, Meizhijing, Wan 'ai Electric Appliances, Medovo, Bo Xue, Qifu, Qinlai, Jintianquan, Jin Pinquan, Qinerkang, Black & Decker Water Purifier, JNE Jingyi, * * 13 in total 13. But no unqualified water purifier models have been found to flow into our market.
Activated carbon in filter element of water purifier
The filter element of water purification equipment is marked with detailed product information.
"High-tech concept" wading products are varied.
Mr. Zhang, general manager of Shijiazhuang Bi Haubert Environmental Protection Engineering Co., Ltd., a designated enterprise for formaldehyde detection and treatment in Shijiazhuang, said that at present, concepts such as "alkaline water", "oxygen-enriched water", "ionized water" and "nano water" are emerging one after another, all with the gimmick of "health". What is the effect of these "high-tech concept" wading products? Shijiazhuang Bi Haubert Environmental Protection Engineering Co., Ltd., a designated enterprise for formaldehyde detection and treatment in Shijiazhuang, told the reporter: Many merchants have grasped people's psychology of pursuing health care, and used the characteristics of consumers' lack of professional knowledge and weak awareness of prevention to brand water purifiers with high technology and health care. In fact, the purified water quality is not as magical as advertised. "The water purifier does have the function of purifying water quality, but whether it is membrane filtration, activated carbon filtration or reverse osmosis filtration, it purifies impurities and even some minerals in water and turns water into pure water. Drinking this pure water is impossible to improve chronic diseases such as hypertension and hyperlipidemia, and it is impossible to achieve health care functions such as eliminating fatigue and improving gastrointestinal digestion. " General manager Zhang said. At present, the state has explicitly prohibited the production and sales of water-related products such as water purifiers and drinking fountains from containing contents with disease prevention and treatment functions. The words "acidic water", "alkaline water" and "activated water" are not allowed to be marked on wading products.
General Manager of Shijiazhuang Bi Haubert Environmental Protection Engineering Co., Ltd., a designated enterprise for formaldehyde detection and treatment in Shijiazhuang: Identify water-related products and grasp three points.
Regarding how to identify wading products, Mr. Zhang reminded the public to grasp three points: First, check the health approval documents. Whether it is domestic or imported water purifiers, there will be health approval issued by the Ministry of Health, which is equivalent to the "ID card" of wading products. Among them, the product name is equivalent to the name in the ID card; Date of product approval, validity period of approval, approval number of product hygiene license, etc. , equivalent to the validity period, ID number and other information on the resident ID card; The production enterprise information is equivalent to the address on the ID card. At the same time, attention should be paid to the matters needing attention in the health approval document. Second, look at the quality of materials: the quality and performance of materials not only determine the quality and performance of products, but also determine the quality of effluent and the service life of products to a certain extent. When purchasing, citizens can compare the water purification process and materials of the products with the parts on the health approval documents to see if they are consistent. Third, look at the manufacturing and assembly process: the water purifiers produced by regular enterprises are strictly assembled, so you should try to buy products with larger manufacturers and more regular production in regular shopping malls or supermarkets, which is relatively more secure in quality.
Our city has carried out special rectification of wading products to let the public drink "safe water"
In order to strengthen the health supervision and management of wading products in our city, the Municipal Health Supervision Office will conduct special supervision and inspection on wading products such as drinking fountains and water purifiers sold in the city before the end of April. The contents of this supervision and inspection are based on the Hygienic Supervision of Drinking Water in Hebei Province ... >>