Matters needing attention in installing mobile homes
1. Before installing the wallboard, check whether the columns and wall beams are installed correctly, firmly and smoothly.
2. The vertical flat-fell seam of the metal-faced sandwich panel wall panel should adopt tongue-and-groove seam or I-shaped aluminum splicing, and sealant should be set at the flat-fell seam.
3. The connection between the metal surface sandwich panel and the ground beam, wall beam or floor secondary truss should be connected by bolts. The transverse spacing of connecting bolts shall not be greater than 500mm (at least two bolts shall be set in the width direction of each plate).
4. When cold-formed thin-walled steel structure is installed, the embedded wallboard shall be installed in the slots on both sides of the column in time. The upper and lower lap joints of embedded wallboard shall be tongue-and-groove joints, and the outer panel shall lap downwards, with the lap length not less than15 mm. ..
Extended data
Because practicality is the first choice, there has been a preliminary division of space in design, so the prefabricated house does not need to be renovated on a large scale like the house we usually live in, but in the process of living, according to its architectural characteristics, following the principle of simplicity and flexibility.
According to senior designers, first of all, before moving in, professionals should make a final inspection on the installation quality of trailers to ensure safety. As it is generally not used as a long-term residence, the furniture of prefabricated houses should also be selected with moderate weight and convenient movement as far as possible, which is not only conducive to the position adjustment in the process of living, but also convenient for future migration.
Try not to decorate the walls and ceilings of board houses too much, such as hanging heavy chandeliers and home decorations, and keep other facilities as simple as possible.
Baidu encyclopedia-mobile board room