Widely used in hospitals, schools, laboratories, scientific research institutes and other occasions, as well as supermarkets, food preservation, fisheries fishing cold storage, medical applications, chemical, food processing and other industries.
Laboratory snow ice machine routine maintenance:
1. No matter what reason the compressor (lack of water, too much ice, power outages, etc.) and shut down, shall not be started continuously, to start again every 5min to avoid damage to the compressor.
2. Regularly check the inlet and outlet pipe joints, in order to deal with a small amount of residual water may leak.
3. When the ice crusher is not in use, the residual water in the inner liner should be drained, dry the inner liner of the refrigerator with a clean cloth, unscrew the drain connector cover at the back of the box to drain the residual water in the water box, and then tighten the drain connector cover 9.
4. When the surrounding temperature drops below 0℃, there is a possibility of freezing, and you must carry out the drainage operation to drain off the water, or there is a possibility of the rupture of the inlet pipe.
5. Drainage pipes should be checked 1 to 2 times a year to prevent clogging.
6. Unplug the ice crusher when it is being cleaned, inspected and not used for more than a week.
When plugging and unplugging the power supply, hold the plug in your hand and do not pull on the power cord.