Shanghai Songxia teach you how to correctly install the use of stainless steel metal hose?

1.Metal hose can generally be divided into three lengths:The first is the length of the variable small, that is, the length of the plastic tube transmission to the larger (small) position of the data when the length; The second is based on the length, which is the length of the plastic tube in the middle of the larger deviation of the length of the middle position of the middle position of the length when the length; The third is the length of the collection, the plastic tube is stretched to the length of the larger (small) when the length.

2. The plastic pipe is installed with the stainless steel sheet metal hose in the middle position, which is the installation length. In that installation condition, the stainless steel plate metal hose can have 2 fitness movement directions when it is pressurized, and if it only moves to 1 part, it is likely to harm the tensile strength of the stainless steel plate metal hose and reduce the application deadline. In the actual installation procedures, taking into account the use of a scale to calculate the formula to measure the length of the plastic pipe and then install it is likely to harm the manufacturing efficiency, but also some businessmen to the scale immediately installed in the tap water pipe, after the installation of the scale cut off.

3. Metal hose can be installed horizontally, also can be installed vertically or inclined, the best case vertical installation, in addition, avoid installation around the wheel, if necessary, can be modified baffle. In addition, although the fluid density of the metal hose can also be Rashen, but if it is not installed according to the precise location, it will be quickly cracked, reducing the application deadline.