? Mabel Fluoroplastic Magnetic Pump
Mabel Fluoroplastic Magnetic Pump is widely used in electroplating wastewater, pickling and polishing, biomedical, pesticide pharmaceutical biomedical, iron and steel metallurgy, etc., which can easily solve the problem of acid and alkali liquid transportation.
MaxOffice adopts all the corrosion-resistant fittings in the market, and strictly controls the quality of each process with special inspection to ensure that each pump is "0%", "0%", "0%", "0%", "0%", "0%", "0%" and "0%". A pump to do "0" repair rate!
1, fluorine lined magnetic pump conveying medium is not allowed to contain ferromagnetic impurities and hard impurities. If there are ferromagnetic particles, a magnetic filter is required. And it is not suitable for conveying the medium that produces a lot of crystallization after stopping.
2. Fluorine lined magnetic pumps are not allowed to work under the rated flow less than 30.
3, for conveying media density greater than 1200kg/m? of liquid, need to inform our sales department, the motor power needs to be increased appropriately.
4, mechanical seal working pressure 1.0MPa, more than this pressure needs to be configured mechanical seal thrust ring.
5, special media selection of special wear parts, such as hydrofluoric acid selection of pressure-free sintered silicon carbide, nitric acid selection of ceramic or silicon carbide.
6, to prevent electrostatic damage: conveying low conductivity liquid, such as ultra-pure water or fluorine inert liquid, in the pump will produce static electricity, ? This will cause discharge and pump damage, should be taken to prevent the generation of static electricity, lead to static electricity or other measures.
Mabel fluoroplastic magnetic pump is independently developed and produced by Mabel environmental protection, according to the specific conditions can provide you with non-standard customization,
Detailed questions call 152 5018 0345 and engineers online one-on-one technical advice? Hope to adopt ~ I hope to help you oh!