December 1988, China Article Numbering Center (CACC) was established;
April 1991, CACC formally joined the International Article Numbering Association (IANSA);
June 1991, CACC started to prepare for the establishment of the National Quality Supervision and Inspection Center for Barcoding (NQSIQ);
May 1991, the first batch of five national barcode standards were issued and implemented;
June 1992 China's first POS system was developed;
November 1992, China Barcode and Technology Application Association was established;
November 1992, the key project of "Barcode System Development" undertaken by the former State Science and Technology Commission passed the appraisal;
March 1993, the journal "Barcode and Information System" magazine was founded;
April 1994, hosted the meeting of the heads of EAN coding organizations in the Asia-Pacific region in Beijing;
April 1994, hosted the International Automatic Identification Technology Exhibition (SCAN-CHINA) for the first time;
October 1994, the National Quality Supervision and Inspection Center of Bar Codes (NQSIQ) carried out the first national quality supervision and sampling inspection of bar codes. August 1995: "EANCOM" was officially published;
April 1997: "Two-dimensional Barcode Technology Research and Application Pilot Project" was undertaken by National Science and Technology Commission as a key project in the Ninth Five-Year Plan;
April 1997: "Two-dimensional Barcode Technology Research and Application Pilot Project" was undertaken by National Science and Technology Commission as a key project in the Ninth Five-Year Plan.
July 1997, the National Barcode Quality Supervision and Inspection Center passed the acceptance of the former State Bureau of Technical Supervision and obtained the Certificate of Authorization of the National Quality Supervision and Inspection Center of the People's Republic of China;
September 1997, it was approved by the former State Science and Technology Commission as a supporting unit of the "National Scientific and Technological Achievements Key Promotion Plan" project;
December 1997, the former State Bureau of Quality and Technical Supervision of the scientific research project "trade EDI research" passed the appraisal;
January 1998, the former State Science and Technology Commission of the "Ninth Five-Year Plan" the most important project. "Research and Development of EDI Comprehensive Application Demonstration System for Typical Cities;
July 1998 The former State Bureau of Quality and Technical Supervision promulgated Measures for the Administration of Commodity Barcodes;
August 1998 Revision of National Standards for Commodity Barcodes;
02/1999 May, 2000 EAN Plenary Meeting 2000 hosted in Beijing;
July, 2000 Commodity Barcode Printing Qualification Accreditation officially launched;
August, 2001 China ECR Committee established;
September, 2001 China Automatic Identification Technology Association established;
At the same time, the China Barcode Association was established. September 2001, China Automatic Identification Technology Association was established;
December 2001, the Ministry of Science and Technology to undertake the key project "Logistics and Distribution System Key Standards Research";
April 2002, the center's website was formally opened;
July 2002, the National Technical Committee for Standardization of Information Technology Signed an agreement with the International Article Numbering Association on the promotion and application of "Global Product Classification Scheme" in China;
July 2003 The General Administration of Quality Supervision, Inspection and Quarantine issued a document to formally launch the "Barcode Promotion Project in China";
August 2003 The National Technical Committee for Standardization of Logistics Information Management was established.
October 2003, the National Barcode Quality Supervision and Inspection Center was accredited by China Laboratory Accreditation Committee;
December 2003, the "United Nations Standard Product and Service Code (UNSPSC) Chinese version of the Maintenance Agreement" was signed with the Uniform Code Council of the U.S.A.
December 2003, "China Barcode Promotion Project" was formally launched. p>December 2003 "Global Electronic Product Code (EPC)" research project was launched;
February 2004 officially opened the official website of China Electronic Product Code;
04/2004 EPCglobal China - China Management Center for Global Electronic Product Code. The EPCglobal China Management Center for Product E-Code was established;
April 2004 EPCglobal's first Asia-Pacific training tour was held in Beijing;
April 2004 The first high-level symposium on Product E-Code and the Internet of Things (IoT) was held in Beijing;
April 2004 The first book on Product E-Code in China was published in Beijing;
The first book on Product E-Code in China was published in Beijing. The first book on product electronic code - "EPC and Internet of Things" was published;
2004.05 National Barcode Quality Supervision and Inspection Center was authorized by AQSIQ as a special authorization for barcode metrology and calibration institution;
2004.06 United Nations Standard Product and Service Code ( UNSPSC (United Nations Standard Product and Service Code) Chinese version released;
July 2004 UNSPSC (United Nations Standard Product and Service Code) China Management Center website opened and accepted member registration applications;
August 2004 China's logistics information standard system table released;
October 2004 China's product e-code registration and management work was officially launched. Ltd. became the first EPCglobal China member;
October 2004 Miguel Lopera, CEO of the International Article Numbering Association (IANSA), and Chris Adcock, the new Chairman of EPCglobal, paid their first visit to China;
November 2004 November 2004, jointly with 100 building materials production and retail enterprises in China, we put forward the initiative of "actively adopting commodity bar code to promote the rapid development of China's building materials industry", and the promotion and application of the EAN-UCC system in the building materials industry has started in full swing;
December 2004, jointly with the Department of Science and Technology Education of the State Tobacco Monopoly Administration (SATMA), the State Tobacco Monopoly Administration (STMA) issued "Adjustment Program for the Use of Commodity Bar Code in Cigarette Production In December 2004, the State Barcode Quality Supervision and Inspection Center (SBQSIQ) jointly issued the notice of "Adjustment Program for Cigarette Manufacturing Enterprises to Use Commodity Barcodes", and the barcode registration work of China's cigarette enterprises was restarted according to the new program;
December 2004 The State Barcode Quality Supervision and Inspection Center (SBQSIQ) completed the State Supervision and Inspection on Product Quality of the General Administration of Quality Supervision and Inspection (AQSIQ) with the passing rate of 73%;
January 2005 The International Article Numbering Association (IANSA) Advisory Board Meeting was held in Beijing;
April 2005, the first meeting of the working group for barcode application promotion in the garment industry was held in Guangdong;
May 2005, the first meeting of the working group for drafting national standards of "Barcode Identification Coding for Automotive Parts and Accessory Systems" (tentative name) was held in Beijing;
June 2005 EPCglobal Management Committee meeting was held in Beijing, the same period held the third China International Product E-Code and RFID High-level Forum, EPCglobal Management Committee and Chinese institutions, enterprise round table and meet with the media, promote the promotion of product electronic code in China;
October 2005 The first batch of EPCglobal The first batch of EPCglobal China System Members Award Ceremony and EPC Technology Application Seminar" was held in Beijing, and Oriental Liger Technology Co. Ltd. as the first batch of EPCglobal China senior members received certificates from Wang Zhongmin, deputy director of Standardization Administration of China, and Jiao Yunqi, president of China National Institute of Standardization (CNIS).
October 2005 2005 Barcode Technology Publicity Week, with the theme of "Newly Revised Measures for the Administration of Commodity Barcodes", assisted the Department of Regulations of the General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) in convening a press conference and organizing national coding and quality supervision workers to carry out study and publicity work.
January 2006, Mr. Liu Mean, Director of the National Standardization Administration of China, met with the person in charge of EPCglobal, and the two sides carried out extensive and in-depth exchanges on EPC standards, frequency, and application promotion.
February 2006 The 2006 meeting of the International Article Numbering Association Forum (IANSA Forum) was held on February 13-17, 2006 in Brussels, the capital of Belgium. The Center participated in a variety of communication methods to improve the international discourse.
April 2006 April 5-6, 2006, the third Product Information Registration System Workshop was successfully held in Beijing. There are already more than 50,000 enterprises and 650,000 product data in the Product Information Registration System.
May 2006 Zhang Chenghai, Director of China Article Numbering Center, was invited to attend the MBA Academic Forum held in Beijing Jiaotong University and gave a lecture on the theme of "National Article Numbering and Labeling System" to the participating teachers and students.
May 2006 The 2006 Plenary Session of the International Article Numbering Association (GS1) was held on May 15-18 in Malta. Representatives of China Article Numbering Center introduced China's first GS1 system solution for beef tracking at the meeting, which was widely noticed and praised, and received a plaque commemorating the 15th anniversary of joining GS1.
June 2006 "Commercial Vehicle Export" Forum was held in Beijing, at which the standard of "Globally Harmonized System (GHS) coding and barcode marking for automotive parts and components" was explained, in order to promote the application of automatic identification technology in the automotive industry.
July 2006, the inaugural meeting of the National Article Code Standardization Technical Committee was held in Beijing. The committee consists of 41 members, and the secretariat is located in the China Article Numbering Center.
July 2006 China ECR Conference 2006 was held in Beijing from July 19 to 20, with the theme of "ECR to Promote the Innovation of China's Supply Chain".
August 2006 China Automatic Identification Technology Association published the first issue of "China Automatic Identification Technology" magazine, to the end of 2006 *** published three issues.
September 2006 China Article Numbering Center "Eleventh Five-Year Plan" Seminar was held in Beijing on the 20th. Mr. Zhang Chenghai, Director of the Center, introduced the main contents of the 11th Five-Year Plan in detail, and the participants discussed it enthusiastically.
October 2006 GS1 Vietnam paid an exchange visit to China Article Numbering Center (CACC) and its branches on October 22nd. Both sides introduced the development status of the two countries' coding organizations, their work priorities and staffing, and discussed hot issues such as barcodes, product electronic codes, tracking and tracing, GDSN and so on.
November 2006 The 9th ECR Asia Conference was held in Kuala Lumpur, Malaysia from November 13th to 16th. China Article Numbering Center (CACC) successfully delivered a speech in English on the first day of the conference on "China's First Case of Beef Tracking and Tracing with GS1 System", which was well received by the delegates and expanded its international influence.
November 2006 The 13th International Automatic Identification Technology Exhibition was held in Beijing on November 21st. During the same period of the exhibition, "2006 RFID Technology Application Forum" and China Automatic Identification Industry New Technology and New Products Conference were also held.
November 2006, "2006 Barcode Technology Publicity Week" kicked off on November 20, the publicity week to improve the quality of commodity barcode as the theme, in the promotion of the project from take-off to maturity over the key year, to ensure that the high quality of barcodes, to ensure that the barcode application enterprises and the public's The theme of this publicity week is to improve the quality of commodity barcode, to ensure the high quality of barcode and the interests of barcode application enterprises and the public.
On November 14, 2006, the China Barcode Promotion Project - "Yunnan Pollution-Free Farming and Meat Products EAN?UCC Radio Frequency Management System" passed the acceptance of the experts in Kunming, which realized the zero breakthrough of the application of China's EAN-UCC Radio Frequency Management System in the Farming Industry, and took a solid step forward to the successful completion of the goal of the promotion project.
November 11, 2006, the application of EAN-UCC system in Shanghai implantable medical device traceability has been fully launched recently. The Shanghai Pharmaceutical Supervision Department clearly requires that domestic implantable medical devices sold in Shanghai should adopt the EAN-UCC system.
November 2006, November 27-30, the International Article Numbering Association (GS1) Asia-Pacific Regional Forum was held in Indonesia. China Article Numbering Center (CACC) introduced China's implementation progress and pilot situation in GDSN to the representatives of 16 countries (regions), which enhanced international exchanges.
December 2006, China Article Numbering Center (CACC) held the National Barcode Inspector Training Course in Hefei City, Anhui Province, from November 30th to December 2nd, laying a solid foundation of talents for the further promotion and application of barcode technology in China.
December 2006 China Automatic Identification Technology Association (CAITA) held the second three councils, promulgated nine association standards and two research reports, and implemented them from January 1, 2007 onwards.
January, 2007, accompanied by representatives of the International Department of the State Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) to the headquarters of the International Article Numbering Association (IANA) in Belgium for exchange visits.
January 2007: Completion of AQSIQ's scientific research project "Research on China's Product Electronic Code System".
January 2007, a delegation from the Logistics Department of the Armed Police Headquarters was sent to Singapore to study the local police logistics and coding application.
February 2007 sent to Belgium to participate in the global forum of the International Article Numbering Association.
February 2007 Completed the draft of the national standard "EPC Data Coding Structure".
March 2007 National Article Coding Work Conference 2007 held in Nanchang.
March 2007 Director of the Coding Center, Mr. Zhang Chenghai, went to Canada to attend the meeting of the Advisory Board of the International Article Numbering Association (IANSA).
March 2007: Edited and published "Logistics Standardization".
April 2007: Promoting the introduction of UHF RFID frequency band for China's product electronic code.
April 2007 The 31st Asia-Pacific ECR Executive Committee Meeting was held in Beijing.
April 2007 Completion of the acceptance of China Barcode Promotion Project "Application of ANCC System in Medical Device Supervision" and other projects.
In May 2007, the 2007 GS1 Asia-Pacific DataBar Training was held in Beijing.
May 2007 "Seminar on Automatic Identification Technology and Application and the 11th National Colleges and Universities Barcode Technology and Application Teacher Training" was held in Beijing.
May 2007 "Introduction to Automatic Identification Technology" was published and distributed.
May, 2007, the delegation went to South Korea to attend the 2007 Plenary Session of the International Article Numbering Association (IANSA).
May, 2007, sent to Singapore to participate in the EPCglobal/RFID Forum, where he delivered a keynote speech titled "EPC Application Status in China".
June 2007, "the first national item code branch service work conference" was held in Jinan.
July 2007 In line with the national bicycle special rectification work, the company researched and formulated the bicycle coding scheme, developed the national bicycle enterprise code registration information management system, and set up a special website.
July 2007 Assisted in the development and completion of the cataloging system for logistics materials of the Armed Police Force.
July 2007 The standard of "Commodity Barcode Participant Position Coding and Barcode Representation" was released.
July, 2007 "Sand Table Model of Article Code Application Field" appeared in the "Image Exhibition" of AQSIQ Quality Inspection Achievements.
July 2007 "two-dimensional bar code technology and applications" published.
August 2007 GB/T 21049 National Standard of Hanxin Code was formally released;
August 2007 Completed the projects of China Barcode Promotion Project, such as "Application of GS1 System in Pharmaceutical Price Supervision and Medical Insurance Settlement System", "Barcode Management Information System for Pharmaceutical Retail Enterprises (GSP, POS, MIS System)", "Research and Quality Solutions for Weak Link in Barcode Printing" and so on. Acceptance of projects such as "Research and Quality Solutions for Weak Links in Barcode Printing".
September 2007 Passed the international authoritative evaluation and was the first batch to obtain the qualification of MET RFID testing laboratory accreditation.
September 2007, we sent staff to Japan to participate in the Asia-Pacific Automatic Identification Technology Exhibition.
September 2007, completed the acceptance of China Barcode Promotion Project "Construction of China Commodity and Participant Data Service System" and other projects.
October 2007 The 14th International Automatic Identification Technology Exhibition was held in Shanghai.
October 2007 Press Conference on National Standard of Hanshin Code was held.
October 2007 Facilitated Haier Group to join EPCglobal Management Committee.
October 2007 Publication of the Framework of National Item Code System and the Administrative Regulations of Item Code.
October 2007 Acceptance of the project "Adaptability Measurement and Analysis of Barcode Symbologies Printed on Plastic Film" of China Barcode Promotion Project.
October 2007 Publication and Distribution of Electronic Data Interchange Technology and Application.
November 2007 "National Branch Teacher Qualification Training" was held in Beijing.
November 2007 The first meeting of the 2007 China ECR Board of Directors was held in Beijing.
November 2007 Sent staff to Vietnam to attend the International Article Numbering Association Asia Pacific Forum.
November 2007, "Barcode Laboratory Demonstration Base of Zhengzhou Railway Vocational and Technical College of China Barcode Promotion Project" was inaugurated in Henan Province.
December 2007 China GDSN Data Pool passed global certification.
December 2007 Completion of the Exposure Draft of the National Standard of EPC Information Service.
December 2007 "General Technical Specification for Barcode Printers" "General Technical Specification for Active RF Labels" "General Technical Specification for Semi-Passive RF Labels" Three association specifications released.
December 2007 "China's commercial circulation area cooperative operation system basic data platform key standards research and application demonstration" was introduced.
December 2007: China Barcode Promotion Project "Research on the Model of Public **** Logistics Data Management Platform" was accepted.
December 2007, "Barcode Laboratory Demonstration Base of Beijing Youth Politics College of China Barcode Promotion Project" was inaugurated in Beijing;
December 2007, 2007 Work Summarization Meeting of China Article Numbering Center was held.
January 2008 The results of China Barcode Technology and Application Association's paper collection activity were announced.
January 2008 China Barcode Promotion Project "Popularization and Application of ANCC System in Furniture Industry" passed the acceptance.
February 2008: China Barcode Promotion Project "Application of GS1 System in Traceability of Chinese Herbal Medicine Cultivation" passed the acceptance.
March 2008 2008 National Article Coding Work Conference was successfully held in Shenyang.
March 2008 China Article Numbering Center (CACC) went to Belgium to attend the 2008 Global Forum of International Article Numbering Association.
March 2008 China's Barcode Promotion Project "Popularization and Application of ANCC System in Garment Field" and "Application of ANCC System in Tracking and Tracing of Medical Device Products" passed the acceptance.
March, 2008: China Barcode Promotion Project "Application Research on Coding and Labeling of Blood and Blood Products" passed the acceptance.
April 2008 China Automatic Identification Technology Association held the second meeting for the formulation of the two national standard topics of "General Technical Specification for RF Read/Write Device (Series)" and "General Technical Specification for RF Tag (Series)".
April 2008 Barcode Technology and Application Excellent Paper Recognition and Exchange Meeting was held in Beijing.
May 2008 The Coding Center was the first one to make deployment for the Wenchuan earthquake relief work, and organized several donations and love activities.
May 2008 Director of the Center, Mr. Zhang Chenghai, participated in the 2008 International Article Numbering Association (IACA) Plenary Session held in Croatia.
June 2008 Business Cooperation and Value Creation - 2008 China ECR Conference was successfully held in Beijing.
June 2008 The Thirteenth National Colleges and Universities Training Course for Teachers of Barcode Automatic Identification Technology came to a successful end.
July 2008 EPCglobal TLS Pilot Project Phase II Summary Meeting was held in Beijing.
July 2008 The 2008 Executive Council of China Automatic Identification Technology Association was held.
July 2008 Coding Center attended the 11th ECR Asia-Pacific Conference in Thailand.
September 2008 The First Training Course for Barcode Local Workers was successfully held in Qingdao from September 23rd to 25th, hosted by the Center.
September 2008: China's Barcode Promotion Project "Application of GS1 System in Drug Pricing Supervision and Medical Insurance Settlement System" passed the acceptance.
October 2008 The 15th International Automatic Identification Technology Exhibition was held grandly, and "2008 Automatic Identification Industry and New Products and Technologies Conference", "2008 China Automatic Identification Industry Development High-level Summit", "15th International Automatic Identification Technology Exhibition", "2008 China Automatic Identification Industry Development Summit
2008 International Automatic Identification Technology Exhibition was held grandly in the same period, such as "2008 Automatic Identification Industry and New Products and New Technology Conference", "2008 China Automatic Identification Industry Development Summit", "15th Anniversary Series of On-site Display" and other series of activities, which strengthened in-depth exchanges and interactions between enterprises, users and audiences.
October 2008 China Barcode Promotion Project "Guangxi Rice Flour Quality and Safety Tracking, Tracing and Supervision System" passed the acceptance.
November 2008 Director Ji Zhengkun of National Standards Committee inspected the work of the Coding Center.
November 2008 China Commodity Information Service Platform V2.0 was formally put on line, and a training meeting on China Commodity Information Service Platform was held in Beijing.
November 2008 Director Zhang Chenghai of the Coding Center met with the COO of the International Article Numbering Association (IANSA).
November 2008 Training and Certification of Teachers of the China Article Numbering Center (CACC) in 2008 was successfully completed.
December 2008 New version of China Article Numbering Center website launched.
December 2008 China Article Numbering Center 2008 work summary meeting was held.
January 2009 Mr. Luo Qiuko, Deputy Director of China Article Numbering Center (CACC), met with Mr. David Buckley, senior expert of International Article Numbering Association (IANSA) in Beijing.
February 2009 National Article Coding Work Conference 2009 was held in Changsha.
February 2009 Director Ji Zhengkun of NSC met with Mr. Miguel Lopear, CEO of the International Article Numbering Association (GS1), and Mr. Vicente Escribano, COO of the International Article Numbering Association (IANSA), Mr. Shi Baoguan, Deputy Director of NSC, Mr. Liu Shuangqiu, Director of the Industry Department II, Ms. Chen Ying of the International Department, Mr. Zhang Chenghai, Director of the China Article Numbering Center, Mr. Li Jianhui, Director of the Management Department, Mr. Li Jianhui, and Ms. Chen Ying of the Management Department. Mr. Li Jianhui, Director of Promotion Department, Mr. Guo Weihua, Director of Management Department and Mr. Kong Hongliang, Deputy Director of Promotion Department **** attended the meeting.
February 2009: Hanshin Code's patent on "Method of Converting 2D Barcode Symbologies into Coded Information" was authorized.
March 2009 2009 National Article Coding Organization Service Work Conference and Barcode and Information System Magazine Circulation Networking Conference were held.
March 2009 "China Article Coding 20 Years Achievement Exhibition and Commendation Meeting" was held in Beijing.
March 2009 to complete the "Eleventh Five-Year Plan" National Science and Technology Support Program "modern logistics standards implementation plan".
April 2009 China Article Numbering Center (CACC) logistics promotion staff went to Tianjin, Ningbo and Shanghai to conduct research on logistics information standardization.
April 2009 China Article Numbering Center medical industry promotion website was launched.
April 2009 The inspection team of "Quality and Safety Year" activity visited the CCC to inspect and guide the work.
April 2009 "National Barcode Quality Work Conference" was held in Chongqing.
In May 2009, Mr. Ian Robertson, an expert from EPCglobal, visited China Article Numbering Center.
May 2009 China Article Numbering Center (CACC) sent staff to Santiago, Chile to participate in the 2009 GS1 Plenary Session.
May 2009 The 15th Barcode Teacher Training Course for National Universities was successfully completed.
May 2009 The group finals of 2009 National Student Barcode Competition was held in Beijing.
May 2009 The scientific book "Compendium of Frequently Asked Questions" was published.
June 2009 "China Article Numbering Center Management Information System Training Conference" was held in Hebei.
June 2009 China Barcode Technology and Application Association launched a research on the application of commodity barcode in building materials supermarkets.
In June 2009, Hanshin Code's patents of "Method of Generating 2D Barcode Symbologies" and "Method of Correcting Aberrations of 2D Barcode Graphics" were authorized.
July 2009 Completed the preparation and publication of "Guide to the Application of Commodity Barcodes for Medical and Health Products".
July 2009: Completed the preparation and publication of China Barcode Promotion Project Casebook.
July 2009 Completed the EU project "The Building Radio frequency IDentification solutions for the Global Environment" (BRIDGE). July 2009: Completion of the research tasks and audit report of the EU project "The Building Radio frequency IDentification solutions for the Global Environment" (BRIDGE).
August 2009 China Article Numbering Center (CACC) and China Automatic Identification Technology Association (CAITA) successfully held the 16th International Automatic Identification Technology Exhibition (AIT Exhibition) with the theme of "Quality and Safety, Service Innovation".
August 2009 A publicity week with the theme of "Paying Attention to the Quality of Article Coding Work and Promoting the Application of Commodity Barcode Technology" was held, including the 2009 Product Quality and Safety Traceability Forum, a seminar on the theme of "Quality of Commodity Barcode Application", the "Year of Quality and Safety", and the "Year of Quality and Safety". The activities of the publicity week included 2009 Product Quality and Safety Traceability Forum, seminar on "Quality of Commodity Barcode Application", theme exhibition area of "Quality and Safety Year" activities, and commodity barcode testing activities in supermarkets.
August 2009 "Commodity Information Synchronization Development Seminar and New Yijia - P&G Data Synchronization Project Summary Report" was successfully held.
September 2009 The patent of "Barcode Reading Device Inspection Device" was authorized.
October 2009 AQSIQ and CNCA officially authorized the establishment of the National RFID Product Quality Supervision and Inspection Center, which has become the most comprehensive and powerful national quality inspection center in China.
October 2009, the national standard of RFID-based trade item code rules passed the validation.
October 2009 Completed the preparation and publication of the Guide to Application of Commodity Barcode in Building Material Industry.
October 2009 The training and certification of teachers of China Article Numbering Center in 2009 was successfully completed.
November 2009 The first working meeting on the application of China Commodity Information Service Platform (Chengdu) was successfully held.
November 2009 China Barcode Technology and Application Association (CBTA) organized the technical promoters to visit Yanjing Brewery Base for research.
November 2009 2009 China ECR Board of Directors Meeting was successfully held in Nanjing.
December 2009 The two national standards of "Barcode Reader Performance Test Specification" and "Production and Performance Test of Digitized Barcode" passed the experts' validation.
December 2009: Completed the public welfare scientific research project of National Quality Inspection, "Research on Standardization of National Item Coding", and entered the project acceptance stage.
December 2009, we completed the research work of "Research on National Item Identification Network Standard System", and passed the acceptance of the project organized by China National Institute of Standardization (CNIS).
December 2009 Completed the formulation of two national standards related to food safety traceability, namely, Specification for Food Traceability Information Coding and Labeling and General Specification for Food Traceability.
December 2009 Completed the preparation and publication of the Guidelines for Classification and Coding of Logistics Services and Development of Logistics Management Information System.
December 2009 China Article Numbering Center (CACC) Work Summary Meeting was successfully held.