1, line width 50mm: in principle, used for all auxiliary access lines and area demarcation lines, the main access lines of small and medium-sized warehouses and small rooms, and four-corner positioning lines;
2, line width 100mm: in principle, used for the main access lines of large-scale production workshops and large-scale warehouses;
3, Line width 120mm: In principle, it is used for factory traffic line.
Category B - bright yellow paint dotted line
Line width 50mm: large work areas within the regional division line (for aesthetic effect can be flexible), allowing the crossing of the channel line (can be a combination of real and virtual);
Category C - red solid line
Line width 50mm: the division line of the area where the defective products are placed (the encounter area). The division line of the placement area (touching three walls, the fourth side of the ground to draw a red solid line);
Category D - bright yellow and black diagonal striped crosswalk (inclined at 45?):
No-entry warning line in the dangerous goods area, the warning area line, the line of the fire escape route, the line of the raised area (such as the shoulder stones, etc.);
Category E -Green solid line
Dividing line of qualified product placement area and access line of finished product warehouse;
Description: In all the floors which are suitable for taping, under the condition of achieving the same appearance effect, we can use direct taping on the floor instead of painting.
Positioning lines
Category A - the positioning of equipment:
All equipment and the positioning of the workbench are positioned with yellow four-corner positioning lines, the workbench of the four-corner positioning lines of the empty part of the word "XX workbench";
Category B - defective goods area (waste recycling barrels, boxes, defective goods shelves) positioning
Category B - the positioning of the waste area (waste recycling barrels, boxes, defective goods shelves).
Category B - defective area (waste recycling bins, boxes, defective products placed on the shelf) positioning
With a red line, if the positioning range is less than 40cm × 40cm, then directly using the closed solid line framed.
C - fire equipment, oil, chemicals and other hazardous materials positioning
Use red and white warning positioning line;
D - material yardage racks and the shape of the regular common items, the use of yellow four-corner positioning line;
E - fire hydrants, distribution cabinets and other prohibited items of the opening area of the location of the door
Use red and white zebra-style filler line;
Use red and white. Zebra-type filler line;
Class F - positioning of mobile equipment (such as hydraulic trucks, material turnover trucks, etc.)
Use the yellow line around the positioning line, and indicate the direction of starting;
Class G - positioning of shelves
Class H - door opening and closing line
Class I - height limit line
Class J - warning range line
Fire hydrants installed on the wall; power distribution cabinets, distribution boxes, electrical control cabinets, etc.; areas to remind the operation of the work, areas to remind walking, areas to remind bumping heads, etc.;