One, waterproof gypsum board
Medical equipment factory clean room need to use gypsum board must be waterproof gypsum board, and for the biological clean room due to the frequent use of water scrubbing and rinse with disinfectant, even if the waterproof gypsum board should be deformed by the moisture and not resistant to washing, so the provisions of the biological clean room should not be used for gypsum board as a Covering material.
Two, wood
The moisture content of the wood used in the clean room of the medical equipment factory should not be greater than 16%, and shall not be exposed for use. Due to the number of clean room ventilation, low relative humidity, such as the use of large quantities of wood, easy to dry, deformation, loosening, dust, etc., that is, the use of localized use, and must do a good job of anticorrosion and moisture treatment.
Three, three oxygen O3 generator
Biological clean room such as the operating room in order to sterilize the needs of the three oxygen O3 generator will usually be installed. O3 (i.e., ozone) is a strong oxidizing gas that accelerates the environment, especially the oxidation of metal objects rust and corrosion, but also make the general surface of the coating due to oxidation and fading, discoloration. So this kind of clean room requires its decoration materials have good resistance to oxidation, will not produce rust.
Four, ceramic tiles
Durable ceramic tiles paved, long time not cracked, not deformed, not absorb dirt. You can use the following simple method to judge: use ink drops on the back of the product to see if the ink automatically disperses. Generally speaking, the slower the ink disperses, the smaller the water absorption rate, the better the intrinsic quality, the better the durability of the product; conversely, the worse the durability of the product.
Anti-slip ceramic tile is very important. Generally in the bathroom and kitchen and other bathing places should be selected with anti-slip ceramic tile.
Five, anti-bacteria wall plastic
Anti-bacteria wall plastic in a few clean rooms have been used, mainly used for auxiliary rooms and clean passages and other parts of the purification of the lower level, anti-bacteria wall plastic is mainly used in the wall pasting method, the seams are used in a dense spelling, similar to wallpaper. Because of its paste type, life is not long, easy to deformation by moisture drumming, and its decoration grade overall lower, the scope of application is relatively narrow.
Six, decorative panels
Decorative panels, commonly known as panels. Is a solid wood board precision planing into a thickness of 0.2mm or so thin veneer, plywood as a substrate, after the gluing process made of decorative single-sided decorative role of decorative panels. It is a special way of plywood existence, the thickness of 3 centimeter. Decorative panels are currently different from the practice of mixing oil a high-level decorative materials.
Hope it helps you