In the hot summer, a failing air conditioner heralds a long, sweaty, scorching day. And for businesses, especially stores with refrigeration equipment, such as convenience stores and fresh food stores equipped with air curtains, cold drink stores where freezers are the main equipment, and so on.
Once the equipment stops cooling, the business will be greeted with a large loss of food and cost. Found in time is good, if the guests in the case of unconscious purchase of spoiled food caused by food poisoning, gastrointestinal discomfort and other adverse reactions, this kind of thing for the chain brand will be a major blow.
In addition, the repair process is both slow and lengthy, repair, notify the manufacturer, door-to-door inspection, bring all the parts to repair, a series of operations down, not only to endure high temperatures and food deterioration, the store will not be able to operate normally on the day, a day of the flow of water down the drain.
The second disadvantage of splashing water on the outside of the machine to cool down is that the operator can not control the appropriate amount of water, the amount of water is too large easily lead to water can not quickly evaporate, the formation of water. Regular operation of this kind, the compressor's chance of water ingress is very high, the same will cause the result of outboard machine downtime.
Secondly, even if the high temperature does not reach the degree of downtime of the external machine, the high temperature, the external machine is difficult to dissipate the heat will still lead to poor cooling effect of the internal mechanism. In order to keep the internal unit running normally, the external unit needs to consume exponentially more power and electricity.
In the context of the current development of intelligent mechanization, the best solution to this problem is the use of spray-like water flow to the outside of the machine as well as its surrounding temperature constant in the normal temperature range, such as the outside of the machine around the temperature is higher than 35 ° C, open the water spray, and so on, until the temperature falls off after the closure of the water spray.
The advantage of such an operation is, first of all, that the water stream is atomized, fine and easy to evaporate, which solves the problem of waterlogging and water ingress caused by water cooling in general.
And when this solution is fully automated, it will avoid the low perception of high temperatures of the machine by manual labor, as well as the untimely discovery of the critical line of downtime of the external machine. The possibility of high temperature downtime is directly eliminated by maintaining a constant temperature through water spray. Saves a lot of energy and electricity costs that would have been incurred by a drop in cooling capacity due to high temperatures.
If any reader is interested in this program/product, please visit the official website of Nanjing Titanium Technology.