Ford sharp key function diagram, sharp intelligent key use skills

The use of the Ford Sharp Key function is shown as follows:

The working range of the remote control is about 1 meters. In any of the following cases, the working range will be reduced: bad weather conditions in Middot, buildings around Middot vehicles near Middot signal tower, and remote controllers of other vehicles adjacent to your car in Middot may use the same wireless frequency as other short-range wireless transmitters (such as radio toys, medical equipment, wireless headphones, remote control equipment and alarm systems). If the frequency is disturbed, you will not be able to use the remote control. You can still use the mechanical key to lock and unlock the vehicle. Note: Make sure your car is locked before you leave.

note: if you accidentally press any button within the effective distance of the remote control, the remote control will also work. When any of the following situations occurs in intelligent key, the system uses RF signals to exchange information with your car and authorize your car to unlock: ·middot touches the inside of the outer handle of the front door. ·middot press the trunk release button. ·middot press the unlock button on the remote control. If there is too much radio frequency interference in this area, or the battery of the remote control is low, you may need to unlock your car mechanically. In this case, the mechanical key teeth or mechanical keys in intelligent key can be used to open the driver's door.

reprogramming the unlock function of the remote control note: press the unlock button on the remote control to unlock all the doors, or only the driver's door. Press the unlock button again to unlock all the doors. Turn off the ignition switch and press and hold the unlock and lock buttons for more than 3 seconds. The turn signal will flash twice to confirm the modification. To return to the previous unlock mode, repeat the above steps.

@219