1. SCARA robot is used in the circuit board coil detection process
Currently, there is almost no complete set of detection equipment for multi-layer board coil short circuits on the market, and most of this work still relies on manual work. For PCB boards with large apertures, you need to manually place the board on the testing equipment and then turn on the equipment for testing. For PCB boards with small apertures, you need to manually hold the equipment (probe) to detect each coil. The SCARA robot can be used to complete the loading, unloading and alignment of the testing equipment, and complete the testing of all coils on the aperture board at one time; for small aperture boards, use the execution end of the SCARA equipment to fix the probe, and use the probe to test each coil. The coil is used for detection, and our equipment also effectively avoids missed detection due to small or large apertures in the coil during manual operation. Compared with manual operation, it can significantly improve the detection efficiency and avoid quality problems caused by missed detection.
2. DELTA robot is used in the boxing process of small circuit board finished products
Currently, FPC packaging work is generally done manually by picking them up one by one and placing them in the blister tray. Soft and thin, it is very inconvenient to pick up. Even if experienced workers complete this work, the efficiency is very low. Delta800 plus a visual system can pick out qualified FPCs from the messy pile and place them on the suction machine as required. Inside the plastic tray, the effect is no less than artificial. Its speed can reach 60 pieces/min, which can completely replace manual sorting and loading, thus saving valuable labor resources and reducing enterprise costs.
3.6-axis industrial robots are used in AOI inspection processes
Traditional AOI scanning machines rely on manual copying, copying and closing. One worker looks after two scanning machines every day. Repeating this monotonous work, and the pungent smell emitted by the newly made circuit boards will cause certain harm to the human body. The infrared light emitted by the AOI scanning machine is also an invisible killer, all of which are harmful to the workers' health. Health has caused harm. Multi-joint robots are used instead of manual labor to place, turn and retract the boards of two AOIs. Each shift can complete the retracting and retracting of more than 700 PCB hard boards, and the overall efficiency can reach 1 piece/min (of which Including AOI machine scan time). In the future, if the loading and unloading transportation line that cooperates with the retractable and unwinding plate machine can be further connected to the AGV for fixed line transfer, fully automated production of the upper and lower processes can be achieved.
With their advantages of high automation, industrial robots are increasingly being used in industrial production lines. With the continuous innovation of industrial robot technology, robots can also ensure high-speed production during high-speed production. Accuracy, which allows robots to make a difference in the PCB industry.