Full-automatic softening system mainly consists of multi-way valve, controller, resin tank, salt tank, multi-way valve is designed in the same valve body has more than one way valve. According to the pre-set program, the controller generates commands to the multi-way valve, and the multi-way valve automatically completes the switch of each valve, thus realizing the operation, backwashing, regeneration, positive washing and other processes. This equipment is characterized by high degree of automation, low operating costs, small footprint, stable and reliable operation.
Okai water softening equipment operating parameters and technical description
Okai water softening equipment working pressure: 0.15-0.6MPa
Okai water softening equipment working temperature: 5-50 ℃
Okai water softening equipment power supply: 220v, 50Hz
Okai water softening equipment Flow rate range: 0.5-105T/H
Orkai water softening equipment valve material: high strength plastic or copper
Orkai water softening equipment tank material: winding glass fiber reinforced plastic or carbon steel lining
Orkai water softening equipment tank diameter: 150-2400mm
Orkai water softening equipment control: time type or flow type
Orkai softening equipment control: time type or flow type
Orkai softening equipment control: time type or flow type
Orkai softening equipment control: time type or flow type
Okai softening equipment control: time type or flow type Flow type
Okay water softening equipment water hardness: ≤ 0.03mmol / L (raw water hardness ≤ 8mmol / L)
Okay water softening equipment installation conditions: do not need a separate equipment foundation, generally flat installed on the cement floor can be,
In the equipment around the 1-meter perimeter should be set up within the drainage ditch or drainage port.
Commonly used automatic softener model
Type water output controller resin tank salt box control
Methods Remarks
AOK-200T 0.5-1 255/440 φ200 × 1200 φ350 × 750 time type
AOK -200Q 255/460 flow type
AOK -300T 1-2 168/440i φ300×1610 φ430×820 Time Type
AOK -300Q 168/460i Flow Rate Type
AOK -500T 4-6 180/440 φ500×1750 φ530×970 Time Type
AOK -500Q 180/ 480C1 Flow Rate Type
AOK -500Q 180/ 480C1 Flow Rate Type
AOK -200Q 255/460 Flow Rate Type
AOK -600T 6-10 180/440 φ600×1800 φ660×1100 Time Type
AOK -600C1 180/480C1 Flow Rate Type Single Tank System
AOK -600D2 180/480D2 Flow Rate Type One Tank System with One Standby Device
Model No. Water Production Volume Controller Resin Tank Salt Tank Control
Method Remarks
AOK -M600T 4-10 MG942 φ500×1750 φ530×970 Time Type
AOK -M500Q MG962 Flow Rate Type
AOK -SM500Q MG962SM Flow Rate Type One for Each System
AOK -M750T 6-15 MG942 φ750×2200 φ760×1220 Time Type
AOK -M750Q MG962 Flow Rate Type
AOK -SM750Q MG962SM Flow Rate Type, One for One Standby
AOK -600E2 12-20 180/480E2 φ600×1800 φ660×11 1800 φ600×1800 φ660×1100 Flow rate type Double tank alternation
AOK -600E3 18-30 180/480E3 φ600×1800 φ660×1100 Flow rate type Triple tank alternation
AOK -900T 15-20 172/440 φ900×2200 φ760×1220 Time type
AOK -900C1 172/440 φ900×2200 φ760×1220 Time type
AOK -900D2 172/480D2 Flow Type with One Standby
Model No. Water Production Volume Controller Resin Tank Salt Controller
Methods Remarks
AOK -900E2 30-40 172/480E2 φ900 x 2200 φ760 x 1220 Flow Type Double Tank System
AOK -900T 15-20 172/440 φ900 x 2200 φ760 x 1220 Flow Type Double Tank System
The flow type is a single tank system. 760×1220 Flow rate type Double tank alternation
AOK -900E3 45-60 172/480E3 φ900×2200 φ760×1220 Flow rate type Three tank alternation
AOK -1200T 25-30 182/440 φ1200×2400 φ1080×1150 Time type
AOK -1200Q 182/440 φ1200×2400 φ1080×1150 Time type
AOK -1200T 25-30 182/440 φ1200×2400 φ1080×1150 Time type
AOK -1200D2 182/480D2 Flow Type One Tank, One Standby
AOK -1200E2 50-60 182/480E2 φ1200×2400 φ1080×1150 Flow Type Two Tanks Alternate
AOK -1200E3 75-90 182/440 φ1200×2400 φ1080×1150 Flow Type 1200E3 75-90 182/480E3 φ1200×2400 φ1080×1150 Flow type Three tanks alternately
Guangzhou AOK water softening equipment Co.