Safety self-inspection report

Safety self-inspection report (selected 6 articles)

The work has come to an end inadvertently. Looking back on the achievements and problems that have arisen during this period, we must do this Make a summary and write a self-examination report. Are you at a loss to write or have a clue? The following is a safety self-inspection report (selected 6) that I compiled for everyone. It is for reference only. I hope it can help everyone.

Safety self-inspection report 1

In order to ensure the fire prevention and anti-theft safety of our company's office environment, according to the arrangements of the company leaders, the person in charge of the comprehensive office led the relevant office personnel to form a security team The inspection team conducted a strict inspection on the fire safety and anti-theft work of the company's office building and the open-air parking lot downstairs on the afternoon of December 12. The inspection report is now reported as follows:

1. Overall safety inspection Situation

The inspection team first inspected the doors and windows, electrical circuits and switches, fire safety passages in the corridors, fire protection facilities, and environmental sanitation on each floor of the office building. Then the open-air parking lot, green belt and lighting facilities outside the building were inspected.

The inspection team conducted a comprehensive inspection and found that the overall situation was good and there were no major safety hazards.

2. Existing problems

1. The doors leading to the terrace on both sides of the fifth floor roof are not locked, and the door of the fourth floor conference room and an aluminum window in the conference room are not locked. The door lock on the right side of the sliding door of the reading room cannot be locked, and the door lock on the right side of the sliding door of the reading room is damaged. Outsiders can enter and exit at will, which poses a safety hazard.

2. There are piles of debris in the reading room, which are piled up in a messy manner, posing fire safety hazards.

3. The entire building is equipped with only 2 dry powder fire extinguishers, and the shelf life of the dry powder in the fire extinguishers is unknown; the fire hydrants on each floor are locked, but the keys are missing, and it is not possible to check whether the fire hydrants can be used. Normal use. There are fire safety hazards.

4. Some offices on the second floor do not lock the door after get off work, which poses potential security risks against theft.

3. Corrective measures and suggestions

1. Ask a professional locksmith to install new locks for the doors leading to the terrace on both sides of the fifth floor roof, and for the doors and windows of the conference room and reading room on the fourth floor. The doors and fire hydrants on each floor will be replaced with new locks.

2. Classify and organize the reading rooms in accordance with the "6S" management standards to eliminate fire safety hazards.

3. Replace and purchase dry powder fire extinguishers as needed, and review the safety status of fire hydrants after replacing new locks on fire hydrants on each floor.

4. Once again emphasize the requirement that the doors and windows of offices on each floor must be locked after get off work. In response to the safety hazards discovered during the inspection, the inspection team will contact relevant personnel to make timely rectifications to ensure that there are no blind spots in fire safety and no loopholes in anti-theft security, so as to create a stable and safe working and living environment for the company's employees. Safety self-inspection report 2

After the huge fire accident on Hanzheng Street on January 17, 20xx, the central party and government leaders attached great importance to it. On January 18, Director Zeng Hongbing held an emergency meeting of the central safety leading group to arrange firefighting work. , a meeting of middle-level cadres of the center was held in the afternoon, where the fire situation was reported and all departments were required to carry out comprehensive fire protection and safety self-inspections. On January 19, a team led by the deputy director in charge, in accordance with the relevant requirements of the District Health Bureau, organized the center's logistics staff to conduct a network-style, full-coverage self-examination of the safety work of our center. The self-inspection situation is now reported as follows :

1. Fire-fighting equipment

1. The center has 44 fire-fighting dry powder fire extinguishers, which were all updated on December 29 last year and distributed in each center. Key location on the floor.

2. There is no responsible person for the fire extinguisher, and the center is making rectifications.

3. There are fire hydrants on each floor of the center, and eye-catching reminders "Please smash the glass in case of emergency" are posted on the glass doors.

2. Evacuation passage conditions

1. Each floor of the center has double fire passages and they are smooth. There is a lack of evacuation instructions. Some of the signs do not meet the requirements and have been rectified and replaced.

2. The center *** has 12 emergency lights, 2 of which were damaged and have been replaced.

3. Electrical equipment and dangerous goods

1. The central oxygen cylinder is stored separately as required and is clearly marked.

2. Some departments in the center have equipment that is safe and intact, and there are phenomena such as connecting wires without permission and using electric stoves for private use.

IV. Key Links

The fourth floor of the center is the Rehabilitation Department for the Elderly, which has always been a key target of fire prevention in the center. Every day, inspectors check whether there is smoking and the use of electric ovens. No hidden dangers were found.

5. Personnel training and setup

1. The center randomly checked the medical staff’s fire protection knowledge and use of fire extinguishers, and they were all relatively proficient.

2. Adhere to the regular inspection system. On the one hand, the security personnel of the center are on duty 24 hours a day, patrolling each floor three times regularly, checking for fire safety hazards, reporting and handling them in a timely manner, and keeping patrol records. On the other hand, the central electrician adheres to the inspection system of three times a day and is mainly responsible for the management of electricity and water. He handles and reports any problems in a timely manner and keeps records at the same time.

6. Other safety conditions

1. In the central water system, the sewers have been drained only once recently and there is no blockage.

2. The inspections of medical devices and highly narcotic drugs in clinical departments all meet the requirements.

3. The exits, toll rooms, and pharmacies on the 1st, 2nd, and 3rd floors of the center are all equipped with electronic surveillance. Currently, there is no electronic surveillance on the 5th floor. We are contacting you for installation.

Over the past few years, the center has always placed fire protection work in an important position, attaching great importance to the relationship between fire protection and efficiency. Through self-examination and rectification, the safety awareness of center employees that "prevention is urgent, hospital safety must always be unremitting" has been further strengthened. Deeply rooted in people's hearts. We will learn the painful lessons from the Hanzheng Street fire, improve the long-term mechanism for normal safety management, further intensify self-examination and rectification efforts, eliminate safety production and fire hazards, ensure the safety of personnel and property, ensure that no major accidents occur, and ensure that this year The work was successfully completed. Safety self-inspection report 3

According to the spirit of the notice from superiors, our school’s safety work leading group has made a clear division of labor for various tasks, assigned responsibilities to each person, and established safety awareness among all teachers and students. , safety is no small matter, the school attaches great importance to safety work as a top priority, and has signed safety target responsibility letters with all relevant personnel at all levels, and formulated a "safety management system", "safety accountability system", "major accident emergency plan" and other management System, arrange leaders and teachers to be on duty. We have conducted a detailed and comprehensive self-inspection on the safety work of the whole school. The report is as follows:

1. Sound organization and clear responsibilities

Establishing leadership The team has a dedicated person who clearly understands their responsibilities and has clear work goals.

Team leader:

Deputy team leader:

Team members:

2. The school’s self-inspection of safety work

p>

1. Safety issues should be regarded as an important content in every meeting and carefully deployed and emphasized to attract the attention of teachers and students and establish the concept of "safety first".

2. Use the flag-raising time on Monday to give a speech under the national flag with the theme of safety education to all teachers and students, expound the significance of safety education in connection with reality, and enumerate the various safety hazards that currently exist, Educating everyone on how to take precautions and elaborating in detail has greatly enhanced the safety awareness of teachers and students and improved their ability to protect themselves.

3. Taking the class as a unit, we used the class meeting time to hold a class meeting with the theme of "Safety Education", allowing everyone to connect with the reality of school, family and society, and talk about their understanding of safety issues and How to do a good job in safety precautions and self-protection issues will further sound a safety alarm to everyone.

4. Strengthen publicity efforts to make safety issues known to everyone. In order to achieve this goal, the school conducted special lectures on safety knowledge for students, and learned safety, self-protection and self-rescue knowledge, and fire safety knowledge. Through the broadcast room, daily broadcast propaganda was carried out. Secondly, we also published a column on safety issues to promote relevant safety knowledge, so that everyone can realize that safety issues are related to thousands of households and are related to the happiness of everyone and the whole family. This has enhanced the safety awareness of all teachers and students and consciously adopted Take appropriate safety precautions and protect yourself.

5. After several inspections of the boiler, it was found that the motor is well maintained, the instruments are normal, and the boiler is maintained as required. The boiler workers can skillfully master the techniques of each link and can work with certificates.

6. Implement a daily and weekly system for school safety leaders. One leader will be responsible for safety inspections every day and report weekly. We will pilot a safety accountability system to ensure that safety and security work is truly implemented. Leaders are on duty during holidays to prevent accidents. In addition, our school arranges for 2 teachers to be on duty every day, and 2 fixed teachers to serve as overnight teachers. We have also established a day and overnight duty system, and we have detailed records of every day's work and write down what happened on that day. In addition to arranging nursing students during holidays, our school also arranges two people per class every day to inspect the school environment and students' activities between classes.

7. In terms of electricity safety: The wiring layout of school classrooms and offices is reasonable and standardized. Unified power transmission management, no hidden dangers.

8. There are no obvious dangers or hidden dangers in the surrounding environment of the school.

9. In terms of laboratory safety: laboratory wiring standards are in place, there are no bare wires, and there is no damage or hanging on various sockets. Experimental supplies are arranged neatly and orderly, and there are dedicated personnel responsible for, safekeeping, and management of experimental supplies.

10. In terms of computer room safety: the main indoor power line is concealed and equipped with a main gate and leakage protector. And equipped with fire extinguishers.

11. In terms of safety of sports facilities: The installation layout of sports facilities should be reasonable and firm, problems should be solved promptly, severely corroded equipment should be replaced in a timely manner, and open-air sports equipment should be painted once a year.

3. Existing problems

1. The safety awareness and prevention awareness of individual teachers and students are weak and need to be improved.

2. The safety of students riding bicycles to and from school is worrying.

3. Snowfall in winter poses a threat to the safety of students’ activities. Strengthen the supervision of students’ anti-icing work, and strive to ensure safety and avoid similar phenomena.

4. The north side of the office is too high from the ground, which poses safety risks for students during activities

4. Rectification measures

1. Strengthen the thinking of individual teachers and students Education and raising safety awareness.

2. Conduct traffic safety education for commuting students in the form of class meetings.

3. Further clarify the responsibilities, divide the work according to the safety work leading group, make everyone responsible for their own responsibilities, and implement them to everyone.

4. Renovate the toilet during the summer vacation.

In short, after the safety work meeting, our school implemented the spirit of the city and county education bureau’s safety work meeting in a down-to-earth manner, attached great importance to the school’s safety work, put the safety management system in place, and dealt with students with hidden safety hazards. The local government will never be lenient and show no mercy to those who take chances. It strictly implements the accountability system, resolutely ensures the safety of teachers and students' lives and property, maintains the overall reform, development and stability of the school, and strives to create a safe and harmonious campus.

Safety self-inspection report 4

Safety is more important than Mount Tai. I have always attached great importance to the safety of my class. I usually find time to instill safety-related knowledge in students and take the trouble to educate them about safety. .Since the students are too young, I not only educate them on safety knowledge, but I also pay attention to observe their movements in my spare time. As long as I find that a student has unsafe behavior, I will educate them in time.

< p> In the first week of school, I worked with all the students in the class to formulate a work plan for this semester. Over the past year, we mainly did the following:

1. Educate students to strictly abide by the school's schedule and go to school. , students are not allowed to stay or play in school or on the road after school, and are not allowed to go with classmates without parents’ permission, so that parents can know the whereabouts of their children at any time.

Students are not allowed to do dangerous things inside and outside the school. Games. For example: chasing each other, running, etc.

2. Educate students not to buy food without food, not to eat rotten food, not to drink unhygienic water and drinks, and not to eat food given by strangers Things.

3. Educate primary school students not to trample on the school lawn, not to damage the school’s flowers, plants and trees. Educate students not to climb walls, not to climb trees, not to climb the school’s basketball hoop, not to climb the railings on the balcony.

4. Educate students not to play with fire, electricity, or firecrackers.

5. Educate students not to bring dangerous items to school (such as wooden sticks, knives, daggers) , waiting for sharp weapons to enter the campus.) Do not play in dangerous places such as train tracks, next to transformers, under high-voltage power lines.

6. Do not play or linger on the way to and from school. Follow the instructions of the road captain, primary school class Safety self-inspection report, rectification report "Primary School Class Safety Self-inspection Report". Go home and report to Captain Lu.

7. Whether it is group activities or physical education classes, they must be conducted under the leadership of teachers. You are not allowed to leave the group at will to do your own activities or disobey instructions. If you encounter other people who are sick or in danger, you must report to the teacher in time. And guide students to learn to use various emergency calls.

8. In summer, you can only swim in the swimming pool under the guidance of your parents. You must not go to ditches, ponds, fish ponds, or swimming pools to play without permission. water, swimming. Use the drowning prevention knowledge taught by school teachers to educate other students.

However, there are still the following problems, and education still needs to be strengthened after notifying parents:

1. Some students still have slippery stairs going up and down the stairs and do not walk in order.

2. The courseware cannot be played in a civilized manner, and there are cuddling, chasing and slapstick.

3. Some students stayed on the road after school by cleaning.

The semester is over. With the efforts of the students and teachers, no safety accidents occurred in the class. However, safety work is the top priority in class work, and we need to talk about it every day. , always say that only by sounding the alarm bell can we prevent all unsafe accidents from happening. Safety self-inspection report 5

In daily work, all the staff of the Street Lighting Office follow the theme of "Safety Responsibility Is More Important than Mount Tai". With the policy of "safety first, prevention first", we actively invest in safety production work with practical actions to ensure the normal operation of street lighting facilities and equipment and ensure the lighting rate. Conducted a comprehensive study of safety knowledge, looked for their own safety problems, made corrections, and implemented safe production.

1. Understanding of production safety.

Safety is an eternal and heavy topic for all the staff of the Street Lighting Institute, and safety work is the top priority of all work. "Pay attention to safety and care for life" is our eternal safety work philosophy, and "safety first, prevention first" is our eternal safety thought. All staff are determined to study safety knowledge and electrical operating procedures seriously, put safety first in everything, and operate according to the procedures, so as to go to work safely and get off work safely.

2. Learning status of knowledge related to production safety.

Regularly organize all employees to study various safety documents issued by superiors, safety laws and regulations and electrical operating procedures, requiring everyone to pay close attention to the word "strict" in their work and strictly implement safety laws. Regulations, electrical operating procedures, and strict labor discipline requirements.

Change the past "backward" way of thinking about safety work, improve safety work methods, so that every employee's safety thinking will go through a process of change from not daring, to being unable, and finally unwilling to violate the safety system; strengthen safety education, enhance A sense of responsibility and awareness of prevention enable everyone to self-consciously abide by safety regulations and proactively improve their ability to avoid accidents. The implementation of safety rules and regulations must be standardized and institutionalized, and their seriousness, punitiveness and fairness must be enhanced to truly realize the principle of "learning from past mistakes and avoiding future ones". As long as various safety systems and regulations are truly implemented, we have reason to believe that all accidents can be prevented and any safety hazards can be controlled or even nipped in the bud.

3. Implementation of production safety at work.

Through the study of laws and regulations related to production safety and electrical operating procedures, staff can consciously abide by safety regulations in their daily work and no longer act "recklessly." As long as the staff enter the construction site, they will take the initiative to wear work clothes and safety helmets; when handling accidents at night, they will take a pen to measure before opening the light door to see whether the light pole is charged; when opening the light door, there is no flashlight lighting. Never reach out to touch the cables in the light pole to prevent electric shock accidents caused by the lack of heat shrink caps or worn out cables; when handling accidents in box-type transformers and control boxes, the two people should supervise each other and do not touch live parts. When transmitting power, in order to prevent electric shock injuries, turn your face to the back, not facing the box transformer or control box, wear insulating gloves, protect your arms with work clothes, and transmit power after all safety measures are in place. Drivers must adjust their condition, and it is absolutely prohibited to drive while fatigued, drink and drive, or drive a gas-fueled car. Workers in the class strictly abide by the principle of safety first and consciously regulate their own behavior, making safe construction a subconscious behavior.

Safety is peace, and peace is happiness. Without safety, nothing is possible. Safety is our unremitting pursuit of life. Safety is our way to enjoy family affection and love, and it is our navigation to realize the value of life happily. lamp. Safety self-inspection report 6

Since this year, in order to ensure that our bureau’s safe production has been free of any safety accidents for 12 consecutive years, create a good safe production working environment, and promote the safe production work of the Grain Bureau and grain enterprises To reach a new level, our bureau carefully followed the relevant arrangements and deployments of the county party committee, county government, county safety committee and municipal grain bureau, attached great importance to it, planned carefully, implemented responsibilities and strengthened inspections, and effectively promoted the in-depth development of production safety work throughout the system. . No production safety accidents occurred throughout the year, and the control goals assigned by the Safety Committee were achieved. The Party Committee of the Economic Bureau gave priority to the assessment status of Comrade Mao Zhiyong, a part-time safety production worker. The self-examination report on the implementation of the main work objectives of production safety in our bureau is now as follows:

1. Strengthen organizational leadership and further improve the level of production safety management

In order to strengthen the safety production work of the entire system The organization and leadership of the production safety work leadership group has been specially established: Director Wu Security Bureau serves as the team leader, and Deputy Director Yang Yongkang, a member of the Party Leadership Group, serves as the deputy team leader. The members include the managers of the grain and oil companies, the heads of the storage companies, and the heads of the Comprehensive Management Office and other departments. people, and implement 1 part-time staff. The storage company has also established a special leadership organization and signed safety production responsibility certificates step by step, strengthening the supervision and implementation of safety production work from top to bottom. Effectively implement the "two insistences": insist on holding a bureau party group meeting and a meeting of grain depot leaders in the first quarter following the regular meeting of the county safety committee on production safety, and insist on inspecting potential safety hazards in the grain depot once a month to ensure 1,000 tons of grain reserves safe storage.

2. Continue to increase publicity and education efforts and enhance employees’ awareness of production safety

Since the beginning of this year, our bureau has taken the opportunity to carry out in-depth "Baan Activities" and "Safety Production Month" activities , taking proficiency in production safety knowledge and enhancing employees' awareness of production safety as the focus of their work, and carrying out safety production publicity and education activities in storage enterprises in a variety of publicity and education forms, so that the word "safety" covers the entire grain storage management grain process. At the same time, employees of the enterprise are carefully organized to study the "Safety Production Law", "Infectious Disease Prevention and Control Law", "Pest Control Drug Management Regulations", "Machine Operation Manual" and other relevant laws and regulations and safety production knowledge, and hire professional fire fighters to explain on site. It has further improved the awareness of the majority of cadres and workers on the importance of safe production and improved the safety quality of workers, thus resulting in a fundamental change from "I want safety" to "I want safety".

3. Seize the key points of work and effectively improve the level of enterprise safety production management

In actual work, the Party Committee of the Grain Bureau pays special attention to fully integrating safety production with improving the safety quality of employees. Through the formulation, drill and practice of "Food Security Emergency Plan", "Flood Prevention Plan", "Emergency Grain and Oil Supply Plan", etc., the cadres and employees' ability to respond to emergencies and self-protection capabilities have been strengthened, and their safety quality has been further improved. . As of December, no safety accidents such as personal injury, damage to assets, or spoilage of food had occurred in the entire system, and the entire system had been guaranteed to have no safety accidents in terms of human, financial, and material safety for 12 consecutive years, thereby emphasizing the importance of production safety in actual work. It has been verified that the safety awareness of cadres and employees has been significantly enhanced, and the company's safety production level has been significantly improved.

4. Strengthen safety inspections and eliminate safety hazards

According to the requirements of the County Safety Committee and the Municipal Bureau, the arrangements and deployment of safety production inspections were carried out. Our bureau specially organized a safety production inspection The inspection team went to the grain storage enterprises for on-site inspection and supervision. A thorough inspection was conducted on the reserve warehouses, dormitories, offices, military supply stores, processing workshops, drug stores, toxic and harmful, flammable and explosive, water and electricity, etc. At the same time, detailed inspections were conducted on the operation of grain storage equipment, the use and management of motor vehicles, and the all-weather patrol system. For the problems discovered during the inspection, the first step is to identify the causes and propose solutions, and the second step is to make rectifications within a time limit without leaving any future troubles. Through supervision and inspection, the safety production status of grain reserve depots and storage enterprises has been effectively changed, safety hazards have been eliminated, and safety foundations have been laid for the normal production of enterprises.

5. Existing problems

(1) The empty warehouses in warehousing enterprises that were in disrepair in the 1960s must be assigned special personnel to closely monitor their dynamics to prevent collapse accidents caused by heavy snowstorms.

(2) The protective fences of individual households in the family area are not installed and reinforced, and theft occurs from time to time. The Grain Bureau has tasked logistics support personnel to strengthen publicity on safety, fire prevention and theft in family areas.

6. Work plan for next year

In order to further consolidate and do a good job in food safety production this year, the Party Committee of the Grain Bureau clearly proposed work requirements for the coming year: First, further implement safety production job responsibilities system, strengthen the safety management of enterprise production and operation activities, and comply with warehousing technical operating procedures. The second is to strengthen safety production education and training. Employees who have not passed safety production education and training are not allowed to work on the job. It is necessary to provide individual pre-job training for temporarily hired laborers by enterprises and strengthen management so that they can master basic safety knowledge. and prevention skills. The third is to improve the production safety inspection system, strengthen communication and coordination with the safety supervision department, and establish a working mechanism for joint inspections; keep complete records of problems discovered during inspections, and promptly notify the enterprise and the production safety management department; fourth, Continue to deepen the special rectification of production safety, and do a good job in the supervision and protection of grain storage warehouses to prevent collapse and injury to people, especially during windy and rainy periods. Precautions should be strengthened; fifth, improve the safety conditions of chemical warehouses, and strictly enforce the procedures for requisitioning. Double locks for two persons to ensure that stored grain chemicals are not stolen, lost or poisoned. Seventh, in view of the current problems of the 1,000-ton local grain storage warehouse being in disrepair and outdated facilities, we must actively strive for government support and do a good job in securing and preparing for the new 5,000-ton special grain storage project.