Legal analysis: 1. White dotted lines, when drawn in road sections, are used to separate traffic flows traveling in the same direction or as identification lines for safe driving distances; when drawn at intersections, they are used to guide vehicles. 2. White solid lines, when drawn in road sections, are used to separate motor vehicles and non-motor vehicles traveling in the same direction, or to indicate the edge of the roadway; when drawn at intersections, they can be used as guide lane lines or stop lines. 3. Yellow dotted lines, when drawn on road sections, are used to separate opposite traffic flows; when drawn on the side of the road or on curbs, they are used to prohibit vehicles from parking on the roadside for long periods of time. 4. Yellow solid lines, when drawn on a road section, are used to separate opposite traffic flows; when drawn on the side of the road or on curbs, they are used to prohibit vehicles from parking on the roadside for a long time or temporarily. 5. Double white dotted lines, when drawn at intersections, serve as deceleration yield lines; when drawn on road sections, they serve as variable lane lines that change the driving direction over time. 6. Double solid yellow lines, when drawn on a road section, are used to separate the flow of traffic traveling in opposite directions. 7. The yellow solid line, when drawn in a road section, is used to separate the traffic flow traveling in the opposite direction; vehicles are prohibited from overtaking, crossing or turning on the side of the yellow solid line, and vehicles are allowed to overtake, cross or turn on the side of the yellow dotted line under the condition of ensuring safety. Or turn around. 8. Double solid white lines, when drawn at intersections, serve as stop and give way lines. Next let's take a look at its features. Road traffic markings are mainly drawn on the road surface and are exposed to the sun, rain, wind, snow and ice, as well as the impact and wear of vehicles. Therefore, there are strict requirements for their performance. Firstly, it requires short drying time and simple operation to reduce traffic interference; secondly, it requires strong reflective ability, bright colors and strong reflectivity, so as to have good visibility during the day and night; thirdly, it should have slip resistance and wear resistance. To ensure driving safety and service life. There are also different classifications of road traffic markings. Among them, road traffic markings can be divided into the following four categories according to their shapes: 1. Lines, solid or dotted lines marked on the road surface, curb stones or facades. 2. Character marks, characters, numbers and various graphic symbols marked on the road surface. 3. Raised road signs are fixed on the road surface and serve as raised marking blocks. They are used to mark center lines, lane dividing lines and edge lines on highways or other roads. They can also be used to mark curves, entrance and exit ramps, Diversion markings, road narrowing, road obstacles, etc. 4. Outline markers indicate the direction of the road and the boundaries of the carriageway. They are placed symmetrically and continuously on the left and right sides along the direction of the road. According to the setting conditions, delineation marks can be divided into two types: embedded in the road surface and attached. Road traffic markings can be divided into the following three categories according to their functions: 1. Indicative markings, markings indicating roadways, driving directions, road edges, sidewalks and other facilities. 2. Prohibition markings, markings that announce the compliance, prohibitions, restrictions and other special regulations on road traffic, and must be strictly followed by vehicle drivers and pedestrians. 3. Warning markings are markings that encourage vehicle drivers and pedestrians to understand the special conditions of the road, increase their alertness, and prepare for precautions or take contingency measures. Road traffic markings can be divided into the following three categories according to their setting methods: 1. Longitudinal markings, markings set along the driving direction of the road. 2. Horizontal markings, markings set at an angle to the direction of traffic on the road. 3. Other markings, character marks or other forms of marking.
Legal basis: "Changchun Motor Vehicle Parking Management Regulations"
Article 29 Any unit or individual shall not engage in the following behaviors that affect the use of road parking spaces: obstruction, Impede the use of road parking spaces; park vehicles carrying flammable, explosive, highly toxic, radioactive or other dangerous goods; smear, carve or post hanging advertisements, signs, slogans and other items on road parking facility charging system equipment; Engaging in business activities such as cleaning, decorating, and repairing motor vehicles in temporary parking spaces on roads; damaging road parking equipment and facilities; parking across the parking space line or the vehicle body beyond the parking space line; failing to pay parking fees in accordance with regulations; other behaviors stipulated by laws and regulations.
Article 31 No unit or individual may set up ground stakes, ground locks and other obstacles on roads and other public areas without authorization to affect the parking of motor vehicles and pedestrian traffic, and shall not illegally set up parking lots without permission. Or use the public free parking spaces for a fee.