Netgear netgear Wireless Router AP Mode

U.S. netgear netgear company has long been committed to providing easy-to-use and powerful network for business users and SOHO users with a comprehensive solution, the manufacture of powerful router equipment, so you know how to set up netgear netgear wireless router AP mode? Below is some information I've compiled about netgear netgear wireless router AP mode for your reference.

How to set up AP mode on Netgear netgear wireless router:

Step 1: Connect one of the four LAN ports of the router to your computer

Step 2: Open a browser and enter the router's management address www.routerlogin. com or www.routerlogin.net

Step 3: In the pop-up windows security? Login window, enter your username and password for the wireless router management interface (the default username is admin, and the password is password, both in lowercase)

Step 4: In the wireless router management interface, click on the? Advanced? >Installation->LAN IP Settings? to set the ? Use the router as a DHCP server? in front of it

Step 5: In the ? LAN TCP/IP Settings - IP Address? Modify to change the Router LAN IP to 192.168.1.100.

The LAN IP (i.e., gateway) of the Router to which the WNDR3700v3 is connected is 192.168.1.1, with mask 255.255.255.0, and the DHCP Server function has been enabled. For future management convenience, you can set the LAN IP address of WNDR3700v3 to this network segment, i.e. 192.168.1.? (? can be a value between 2 and 254, as long as it does not conflict with the IP of other devices on the LAN, the figure is set to 100), and finally click ? Apply? After the settings are updated, the WNDR3700v3 will work as an AP

Step 6: Connect one of the four LAN ports of the wireless router to a network device such as a switch or router. For example, for an application such as the following, simply connect one of the WNDR3700v3's LAN ports to one of the Router's LAN ports:

? ?