Fully introduced and absorbed the mature technology of the United States HANKISON, and on this basis, combined with the characteristics of the actual working conditions in China, the use of scientific and effective design, so as to make it more efficient and stable operation, "Husheng" brand of cold dryer due to advanced technology, reliable operation, low dew point and stable and other advantages. The refrigeration system is well-equipped. The key components of the machine are imported brand-name products, which ensure the processing effect and the reliable operation and life of the system. ●Energy saving-Advanced heat exchanger design, counter-flow structure, good return temperature, no condensation. The air heat exchanger adopts inner and outer wall fully corrugated copper tubes to increase the utilization rate of cold volume, the evaporator is hydrophilic treatment thin-walled purple copper tubes with pure aluminum fins, and the disturbed structure has high heat exchange efficiency. Thorough gas-liquid separation. Adopting filtering gas-liquid separator with American HANKISON cartridge inside, the gas-liquid separation effect is thorough, avoiding the secondary evaporation of water and ensuring the important role of the drying effect of the cold dryer, which has a higher separation efficiency than the cyclone separator, with the separation efficiency reaching 99.99%. ● Excellent drainage system. The structure of the cold dryer adopts more than three levels of drainage, timely and effectively discharging a large amount of condensate and oil, thus ensuring the cleanliness and dryness of the system and the air while also reducing the load of the system. ● Unique chassis and exhaust design, no negative pressure countercurrent, good heat dissipation, fan maintenance is convenient. ●Multiple forms (single, set, joint control, PC board, frequency conversion, etc.) of control lines, suitable for different users to choose. ●Water condenser for low-fin copper tube, slow water flow, multi-stroke, high heat transfer efficiency, long-term use is not easy to scale.
Environmentally friendly refrigerated dryer
The advantages of the new refrigerant:
The advantages of the medium:
◆No destruction of the ozone layer, because of its molecules do not contain chlorine elements, so its ODP (ozone layer depletion coefficient) = 0.
It won' t pollute atmospheric ozonosphere. It won''t pollute atmospheric ozonosphere, because these medium don''t contain elemental chlorine, i.e. ODP=0
◆ Extremely low toxicity: the allowable concentration is the same as that of R-22, 1000ppm.
◆ The toxicity is very low: the allowable concentration is the same as that of R-22, 1000ppm.
Very low toxicity, admissible concentration is 1000ppm.
◆ Non-flammable: Registered as A1 (non-flammable) low-toxicity refrigerant by ASMRAE.
Non-flammable
◆ High chemical and thermal stability.
High chemical and thermal stability
Inverter Freezer Dryer
Advantages of Inverter Freezer Dryer:
Inverter Freezer Dryer is in high efficient operation most of the time, and its refrigeration capacity can be varied according to the actual demand, and it saves more than 40% of electricity than the non-inverter freezer dryer. 40%.
It realizes the slow start of the compressor with zero current and zero voltage, which completely eliminates the impact on the power grid during the start of the fixed-speed compressor, protects other power-using equipments, and greatly reduces the requirement on the capacity of the power grid.
By adjusting the opening of the electronic expansion valve, it can precisely control the degree of overheating of the system, so that the system is always in the state of optimal efficiency and maximum capacity, more flexible and more energy-saving. Heatless regeneration adsorption dryer
With stable and consistent dew point of outlet pressure
A. Reasonable cylinder design ensures that the contact time between compressed air and desiccant is 4.8 seconds, which meets the requirement of dew point of finished gas.
B. 30% desiccant residual quantity is used to compensate for natural aging of desiccant, which ensures the drying effect.
C. Large diffuser ensures that the airflow passes through the desiccant layer evenly and eliminates the phenomenon of ditch flow.
Regeneration gas loss is less than 12% A, excellent barrel design, preserving 95% of the adsorption heat, the stored heat is used to increase the regeneration temperature of the regeneration stage, improve the desorption capacity of the equipment, making the regeneration more complete.
B. The drying and regeneration adopts the reverse convection method, the wet air flows through the dry adsorbent with the best effect.
C. The amount of regeneration air can be adjusted according to the operating load demand of the dryer.
Long service life of desiccant
A. Suitable cylinder size keeps the advantage of gas flow rate and time through the desiccant layer, giving full play to the performance of desiccant.
B. Reasonable system configuration, before the gas stream enters into the barrel, oil and heavy pollutants contained in the gas stream are instantly removed by highly efficient oil removing treatment, so as to avoid the desiccant layer from being polluted.
◆The equipment adopts imported disc valve and advanced and reliable microcomputer program controller, featuring automatic timing and automatic switching. It works stably and reliably and is not affected by power grid, voltage and electric field.
◆Scientific and reasonable design of switching time ensures that the outlet air pressure is stable without fluctuation.
◆No foundation installation, easy installation.
Blowing air adsorption dryer
Energy-saving: the blowing air adsorption dryer uses an independent axial blower blowing air in order to improve the efficiency of the compressed air system, which can transfer 100% of the air supply of the air compressor, thus reducing the cost of the air compressor by 20%.
◇Max working pressure: 1.0MPa
◇Min operating pressure: 0.4MPa
◇Max Inlet air temperature: 48℃
◇Min Inlet air temperature:4℃
◇Max ambient air temperature:48℃
◇Min ambient air temperature:4℃
Compression Heat Regeneration Adsorption dryer
High efficiency, energy-saving
■■ Pressure dew point up to (pressure dew point) -20 ~ -40 ℃;
■ Regeneration of the gas consumption (Purge air) ≤ 1.5%
■ High-quality switching Valve, stable and reliable, can ensure the completion of the workflow, prolong the working life of components;
Reliable valve to ensure the completion of all the procedures, pro-long the lives of other parts
■ Selection of highly Moisture-absorbent activated alumina, shape and size uniformity, high strength, high output dew point, less dust generated, long using life;
High performance of the activated alumina, it is equality, intensity, good dew point and less dust
■ Unique regeneration piping design ensures that the regeneration gas can be evenly distributed when the regeneration gas plane is heated and cold blown, so that the adsorbent in the center part of the adsorption tower is heated evenly, dissipates heat quickly, and regenerates thoroughly; Compressed air precision filter
◆ Aluminum shell filters and flange filters are divided into aluminum shell filters and the new aluminum shell filters are made of high-quality aluminum alloy materials, and the inner and outer parts are made of high quality aluminum alloy materials. The new aluminum housing filters are made of high-quality aluminum alloy and coated with epoxy resin powder inside and outside to improve durability and corrosion resistance; the compact design of the new aluminum housing filters allows them to be connected in series and saves space, and the flow rate of the new filters ranges from 0.7Nm/min to 18 Nm/min; the flange filters range from 1Nm/min to 550 Nm/min;
◆ The HUXSHENG HF series provides high-quality compressed air; the general compressed air system provides high quality compressed air; the general compressed air system provides high quality compressed air; the general compressed air system provides high quality compressed air. Compressed air; a typical compressed air system is contaminated with abrasive solid particles such as dust, dirt, rust and scale, compressor lubricants (mineral or synthetic), condensate droplets and acidic condensate, as well as oil and hydrocarbon vapors. Failure to remove these contaminants can increase maintenance costs for pneumatic equipment, cause instrumentation and control system failures, predispose to product surface quality problems, and contaminate the process. A matched Husheng filter or filtration system will remove these contaminants and allow your compressed air system to achieve the air quality required for your application, which will help ensure consistent output quality while reducing operating costs.
◆ Optional accessories: automatic drain, differential pressure indicator, differential pressure indicator gauge, liquid level indicator.
Self-cleaning filter
HSC self-cleaning filter consists of high-efficiency filter cartridge, venturi, self-cleaning nozzle, blowback system, control system, clean-air chamber and outlet, frame and so on.
Filtering process: under the negative pressure of compressor suction, HSC draws in the surrounding ambient air, when the air passes through the high-efficiency filter cartridge, dust is blocked on the outer surface of the cartridge due to gravity, electrostatic force, contact, and the purified air enters into the clean air chamber and then is sent out by the air outlet pipe.
Self-cleaning process: when the computer issued a command, the solenoid valve starts and drives the diaphragm valve, instantly releasing a pressure of 0.4-0.6MPa pulse airflow, rectified by the special nozzle spray, venturi volume suction, sealing, expansion from the inside of the filter cartridge uniformly to the outside of the outward rushed to the dust accumulated in the outside of the cartridge blown off, the self-cleaning process is complete.
Steam Filter
◇Titanium rods, which are corrosion-resistant, high-temperature-resistant and lightweight, are used as the filter element.
◇The filtering precision of the cartridge is 1μm, and the maximum initial pressure drop is 0.03MPa.
◇Maximum working temperature: 300℃.
◇The shell is 304 or 316 stainless steel, which can bear the maximum working pressure: 1.0MPa.
Oil-water separator
The compressed air oil-water separator is a new type of compressed air oil-water separator developed by the company through absorbing and digesting the advanced technology of compressed air oil-water separator from abroad, and integrating the essence of advanced structure. The product internal screen defoaming, shell with steel welded tank structure, the general use of pressure 1.0Mpa. HSD series of compressed air oil-water separator at the same time using direct interception, inertial collision, Brownian diffusion and cohesion and other mechanisms, can effectively remove the compressed air in the dust, water, oil mist. This series of products in addition to the amount of water, in addition to the oil volume, to adapt to a wide range of working conditions.