(Note: The following hazards are purely under the condition that the design and construction of clean workshop are not up to standard. The normal situation is not so serious, and the dust-free workshop needs strict management in the later stage. It is recommended to consult a professional company. )
Is the dust-free workshop harmful to people?
Simply working in a dust-free workshop is not harmful to your health. You feel dizzy, which should be caused by the shift. The shift diet is irregular, the work and rest are reversed, the immunity is reduced, and the body is in a sub-health state. It's actually quite harmful to your health.
Dust-free, the workshop itself is harmless to the human body, but in the process of work, it will inevitably produce some toxic gases, which will be harmful to the body, especially to women. In the long run, it will be harmful to your face. It is suggested to keep the workshop ventilated and the air flow unobstructed.
Dust-free workshop is of course harmless to the body! But what I want to say is that the design and construction of the dust-free workshop are up to standard! For example, if the floor height is less than 2.3 meters, people will be very depressed, and the fresh air volume per person per hour is less than 40 cubic meters.
What harm does the temperature and humidity in the dust-free workshop do to your health?
A: Generally speaking, if the temperature and humidity are well adjusted, there is no harm! However, some enterprises will focus on products and adjust the indoor temperature and humidity to the best degree of products, which will make people feel uncomfortable. If it is harmful, rheumatism, allergies and the like will have a certain impact in the long run, but it is not the main thing!
Some hazards of hardware facilities in dust-free workshop
The risk of hazards in the workshop comes from the equipment, materials and auxiliary materials in the production process, from the analysis and prevention awareness of managers and operators on hazards, and from the effectiveness of management.
Harm of photoelectric dust-free workshop
Watching too much photoelectric is bad for eyesight, but it is generally strictly controlled and protected and will not cause any harm. If you don't pass the most basic inspection, you can't call it a clean workshop.
Hazards of electronic dust-free workshop, such as display screen. ...
There are many solutions, but there is no harm to the body in the clean room, but it is estimated that there is radiation. As long as the machine is live, there will be radiation, including the assembly line. It is not clear how big it is.
See what kind of workshop it is, whether there are articles that radiate or release harmful gases, such as various paints, white oil and so on. If not, there is no harm.
Hazards of dust-free painting workshop
However, if some pollution or waste gas, such as paint, is generated during work, it may be bad for the respiratory tract.
Harm of dust-free workshop in printing plant
Working on the machines in the workshop is the most harmful, and noise pollution is the first. In the workshop, dozens of printing machines and binding machines are running at the same time, and the noise is as high as 100 decibel. Although employees are required to wear soundproof earplugs, the effect is not satisfactory.
Then the temperature. Usually, the conditions in the workshop are not very good, and the temperature of the printing press is very high, especially for the rotary machine. If it is very hot in summer, even if the workshop has air conditioning, it may be above 30 degrees. Dust pollution, in order to prevent paper adhesion, lithographic printing machine should spray powder on printed matter. Although non-toxic, it is very harmful to health if inhaled in large quantities in the lungs. Working hours are long, usually 12 hours in the printing workshop, and there are often night shifts, which is a great test for the health over time. Commonly used reagents such as ink, alcohol and car wash water also contain harmful substances. If you are in a printing shop, it is mostly the harm of developing and fixing liquid medicine to your body. Other non-production sectors do little harm.
In fact, where we work will have an impact, just as we face the computer every day, wearing dust-free clothes is to avoid the damage of static electricity and dust to products. Therefore, it is not only the strict control of the clean workshop purification engineering company during construction, but also our usual diet, rest, self-protection at work and management in the workshop. I hope everyone will pay attention!