Absorbent door quality identification
1, substrate quality identification method
Substrate quality directly determine whether the cabinet door plate has a secondary ability to eat nails, nail holding capacity and the degree of deformation of the finished absorptive panel and the finished absorptive panels of environmental performance. Good blister door plate substrate in the density and ordinary substrate differences, the best way to distinguish is to choose the same size of the plate small pieces, weighing can be, high density blister door plate relatively speaking, the ability to hold nails will be better, deformation is also smaller.
2, the film skin quality identification method
The quality of the film skin directly determines the grade and performance of the finished blister door plate. Good blister film to achieve a certain thickness, film skin backing uniformity, color to be stable. pvc film if the thickness is low, in the pressure of the corners will produce the phenomenon of white and surface orange peel phenomenon, some manufacturers choose to deal with these two phenomena to lower the pressure of the vacuum molding machine, which reduces the white to a certain extent, there are also sheet deformation problems, but can not guarantee that pvc film skin and the substrate of the adhesion of the firmness of the compression. Uneven film skin adhesive backing the main problem is that PVC film skin and substrate can not be normal adhesive pressure, PVC film skin itself can not be glued through the blister machine and substrate adhesive pressure, must be rolled in the back of the production of glue, we call it adhesive backing, adhesive backing uniformity or not, the quality of the quality of the direct impact on the adhesive pressure between the PVC film skin and the substrate. Color is the most attention of the finished blister plate is a problem, yellowing is an inevitable problem, but the stability of the PVC surface texture and color is to ensure that, otherwise, in the normal use of the wiping process is likely to appear out of color.
3, the surface treatment of blister door panels
Surface treatment is related to the overall image of the finished blister panel. If the orange peel phenomenon is serious, the whole door looks darker (orange peel refraction of light), high-gloss blister door in this point is very obvious.
4, blister door plate workmanship
This is the most likely to cause trouble in the process of use. Mainly in the corners of the adsorption, if there is a phenomenon of gluing, that this piece of plastic cabinet doors in the use of the process may occur in the absorption of deformation and cracking of the PVC film skin itself. When choosing can use fingernail with a little force to pick the PVC film and plate adhesive pressure part, good workmanship (including backing and adhesive pressure glue good) blister plate will not appear a little force on the phenomenon of picking down.
Latest offer of blister door panels
Yage sculpture blister door reference offer: 6180.00/square meter
Senhong wooden door high quality blister door reference offer: 6310.00/set
Tianling PVC blister door reference offer: 6300.00/square meter
xsPVC blister door reference offer: 6260.00/fan
Jiantai famous door reference quote: 6320.00/set
The above is a small compilation of the quality of the blister door plate to identify and blister door plate the latest offer of the relevant content, blister door plate thickness affects the price, so be sure to take into account, to give a few parameters as a reference standard: Europe's best blister door plate thickness of 18mm, PVC coating General imported blister door plate thickness in 16-18mm, PVC coating thickness of 0.3-0.35mm. domestic blister door plate thickness is also 16-18mm, but the quality is not as good as imported, PVC coating thickness of 0.3 or so.