Article II of the special equipment is recognized by the state, because the equipment itself and the influence of external factors are prone to accidents, and once an accident will cause personal injury and death and major economic losses of the greater danger of the equipment.
The provisions of the "special equipment" including elevators, cranes, plant vehicles, passenger ropeways, amusement rides and amusement facilities, explosion-proof electrical equipment. Implementation of the provisions of the specific directory of special equipment, by the State Bureau of Quality and Technical Supervision according to the degree of risk of special equipment, after consulting with the relevant parties to determine, and announced the implementation.
Explosion-proof electrical equipment quality supervision and safety monitoring regulations are developed separately.
Article III of this provision applies to the design, manufacture, installation, use, inspection, maintenance and transformation of special equipment.
Article IV The State Bureau of Quality and Technical Supervision is responsible for the national quality supervision of special equipment and safety supervision; local quality and technical supervision of administrative departments responsible for the administrative region of special equipment quality supervision and safety supervision; quality and technical supervision of the administrative departments at all levels of special equipment safety supervision agencies (hereinafter referred to as special equipment safety supervision agencies) in their respective areas of responsibility, responsible for the implementation of quality supervision and safety of special equipment. Implementation of special equipment quality supervision and safety monitoring.
Special equipment safety inspection agencies at all levels in the implementation of special equipment quality supervision and safety monitoring, should play the role of industry sectors, social intermediary organizations.
Article V engaged in the supervision and inspection of special equipment, technical institutions (hereinafter referred to as supervision and inspection agencies), should have the appropriate conditions, recognized by the quality and technical supervision of administrative departments at or above the provincial level and authorized to carry out authorization of the project before the supervision and inspection of special equipment.
Chapter II General Provisions
Section I Design and Manufacturing
Article 6 design units and their designers are responsible for the design of special equipment quality and safety and technical performance.
The design must comply with the appropriate standards and safety requirements. National standards or industry standards have not been developed, must be consistent with the protection of human health, personal and property safety requirements.
Article VII of the manufacturing unit for the manufacture of special equipment quality and safety technology performance is responsible.
The implementation of the production license management of special equipment, the State Bureau of Quality and Technical Supervision of the unified implementation of the production license system; the implementation of the implementation of the production license management of special equipment, the implementation of the safety certification system. Did not obtain the corresponding product license or safety certificate of recognition of the unit shall not manufacture the corresponding products.
Special equipment production license (replacement) and management, in accordance with the specific provisions of the national production license for industrial products.
Special equipment safety certificate to take (for) the certificate, the implementation of hierarchical management. Certificate application acceptance by the national special equipment safety inspection agency or provincial special equipment safety inspection agency responsible for reviewing the work of the national special equipment safety inspection agency authorized by the unit, after passing the review, respectively, by the State Bureau of Quality and Technical Supervision or the provincial quality and technical supervision of the administrative department approved the issuance of certificates.
Article VIII of one of the following circumstances, must be recognized by the State Quality and Technical Supervision supervision and inspection agencies for the whole machine or component type test, qualified before providing users with:
(a) trial production of special equipment or components of new products;
(b) manufacturing standards or technical regulations have type test requirements for the product or component.
The need for formal production, to obtain the appropriate product license or safety certification before formal production and sales. Qualified from the type test to the production license or safety certification to apply for certification period, shall not exceed six months.
Article IX special equipment products, must be in accordance with relevant laws, administrative regulations and the provisions of Chapter III of the specific requirements, to provide the appropriate randomization of documents, and to ensure the supply of spare parts.
Article X in China, the sale of foreign-made special equipment, its products must comply with China's special equipment laws, administrative regulations, rules, mandatory standards and technical regulations.
Foreign enterprises in China to sell foreign-made special equipment, must be clear that the agents registered in China, and by the agent to assume the corresponding quality and safety responsibilities. The agent must be held to accept the commission agent and registered in China to prove the location of the provincial special equipment safety inspection agency for the record.
Where the sale of foreign-made special equipment products or components in China, the first product or component of the same type must be designated by the State Bureau of Quality and Technical Supervision of the supervision and inspection agencies to carry out type testing, qualified before the official sales.
Section II installation, maintenance and renovation
Article XI of special equipment installation, maintenance and renovation units must be installed, maintenance and renovation of special equipment, quality and safety of technical performance is responsible.
Installation, repair and maintenance, transformation units must have the appropriate conditions to the location of the provincial special equipment safety inspection agency or its authorized special equipment safety inspection agency to apply for recognition of qualifications, qualification certificates obtained before the project can undertake recognition of the business. The qualification certificate is valid throughout the country.
Special equipment installation, repair and maintenance, transformation of business shall not be in any form of subcontracting or subcontracting.
Article XII installation, overhaul, transformation of special equipment before the use of units must be held in the construction program and other relevant information to the region's local, municipal and above, the special equipment safety inspection agency for the record.
Article XIII of the installation, overhaul, transformation of special equipment quality and safety and technical performance, after the construction unit self-test, by the use of units to the provisions of the supervision and inspection agency to apply for acceptance inspection, and by the implementation of the acceptance inspection of the inspection report issued by the agency, qualified, issued by the safety inspection of special equipment mark.
In addition to national laws and administrative regulations provide otherwise, any administrative department shall not require a mandatory acceptance test.
Article XIV installation, overhaul, transformation of special equipment acceptance, the unit responsible for the construction of the project must be the construction of technical documents and information, etc., transferred to the use of the unit deposited in the technical file of the special equipment.
Section III use and management
Article XV of special equipment units must be responsible for the use of special equipment and operational safety.
Special equipment use units must use special equipment with a production license or safety approval certificate. The use of special equipment, must be in accordance with the relevant requirements of the provisions of the application of the corresponding acceptance test and periodic inspection.
Article XVI of the new special equipment, before being put into use, the use of units must be supervised by the inspection agency issued acceptance inspection reports and safety inspection mark, to the region of the local, municipal and above, the special equipment safety inspection agency registration. The safety inspection mark fixed in a prominent position in the special equipment, before being put into formal use.
Article XVII of the use of units must be developed and strictly implemented to the core of the job responsibility system, including the management of technical files, safety operations, routine inspections, maintenance, regular inspection and emergency measures, including the safe use of special equipment and operation of the management system, must ensure that the technical files of special equipment is complete and accurate.
Article 18 of the special equipment may affect its safety and technical performance of natural disasters or equipment accidents, as well as stop using more than one year, before using it again, the use of units should be a comprehensive inspection, must eliminate its impact on the safety of the hidden dangers.
Article 19 of the special equipment operators (refers to special equipment installation, repair, maintenance, operation and other operations of the personnel) must be trained and assessed by the professional, to obtain the local, municipal quality and technical supervision of the administrative department issued by the operators of special equipment qualification certificate before they can engage in the corresponding work.
Article 20 The use of special equipment must be used in the unit for routine maintenance. Special equipment maintenance must be qualified personnel, no special equipment maintenance qualification of the use of units, must be entrusted to obtain special equipment maintenance qualifications of the unit, the daily maintenance of special equipment.
Article 21 The use of units should be strictly enforced special equipment annual inspection, monthly inspection, daily inspection and other routine inspection system, the inspection found that there are abnormalities, must be dealt with in a timely manner, and is strictly prohibited with faulty operation. Inspection should make detailed records and archives for inspection.
Article 22 of the special equipment used in the implementation of safety and technical performance of regular inspection system. The use of special equipment must be used on a regular basis to the location of the supervision and inspection agency to apply for periodic inspection, timely replacement of the relevant content of the safety inspection mark. Safety inspection and certification mark more than the expiration date of the special equipment shall not be used.
The validity of the safety inspection mark from the date of issue of acceptance test or periodic inspection report. Various types of special equipment periodic inspection cycle in accordance with the specific provisions of Chapter III.
Article 23 The standard or technical regulations have a life expectancy of special equipment or parts, should be scrapped in accordance with the corresponding requirements. Special equipment for disposal, the use of units shall be responsible for the special equipment registered special equipment safety inspection agency report.
Article 24 Once an accident occurs in special equipment, the use of units must take emergency rescue measures to prevent the expansion of the disaster, and in accordance with relevant regulations in a timely manner to the local special equipment safety inspection agencies and relevant departments.
Article 25 The use of special equipment in explosion-endangered places, in addition to the implementation of the relevant requirements of the provisions of this regulation, but also must meet the explosion-proof safety requirements.
Section IV supervision, monitoring and supervision and inspection
Article 26 The local quality and technical supervision of the administrative departments should be based on the actual situation in the region, in accordance with the arrangements of the higher quality and technical supervision of the administrative departments of the organization of the special equipment on a regular basis, or from time to time, product quality supervision and random inspection.