Two, weld polishing machine instructions:
1, the power supply into the AC220V, the treatment of the gun connected to the appropriate terminals, plug the control line, open the power switch, the power indicator (i.e., the red light) is on. The treatment of the gun nozzle wrapped in a treatment cloth dipped in liquid easily press the microswitch, the black weld channel a wipe, black instantly disappears, the treatment can be used after the clean water wet cloth wipe test, the effect is better.
2, when working with the gun and workpiece short-circuit, the insurer (RESEI) will automatically disconnect, stop working, at this time only need to press the insurer (RESIT), you can continue to work.
Three, weld polishing machine notes:
1, the use of this machine must wear masks and gloves, be careful to prevent the treatment of liquid sprayed into the eyes;
2, do not connect the machine panel to the workpiece and to connect the treatment of the gun line to the right adjustment;
3, the use of treatment of the gun must be wrapped with a treatment cloth.