Medical equipment with punching holes

SolidWorks abbreviation (SW) is a new generation of mechanical 3D design tool for electrical industry design introduced by Dassault. The Chinese version of SolidWorks adopts a brand-new parallel and serial product development environment and enjoys a 3DCAD model, which is widely used in designing parts, mechanical equipment, medical devices, automobiles, aviation and other industries. SolidWorks can meet the needs of users to directly add various auxiliary plug-ins to the software, connect with various NC programming software, and directly print the model. Regarding the power of solidworks, in fact, I believe that many small partners also have a certain understanding, but for the mastery and use of software, many small partners may still be scratching their heads! It doesn't matter. If you want to learn to use solidworks, you have come to the right place. The rich solidworks quality video course will take you from software foundation to advanced operation.

Wonderful recommendation of solidworks popular video tutorial:

Software Description: Introduction to Solidworks Mechanical Design

Interior design: Solidworks engineering drawing design course

Software introduction: the use of Solidworks measuring tools

Draw the reinforcing plate of derailment groove with SolidWorks sheet metal, and add a nut.

modeling process

1. Draw a sketch on the upper datum.

2. Sheet metal thickness of foundation flange: 1.5.

3. Given the depth of the edge flange: 10, the external virtual intersection; Flange position: Bend outward.

3- 1. Edit the flange profile, add labels, and modify another edge finish in the previous step.

4. Two more release slots were found.

5. Edit the side flange 1 Custom relief groove type-Tear shape: cut.

6. The flange depth of a given sideline is 10, and the flange position is outside the material. Custom Release Groove Type-Tear Shape: Cut.

Stamping tool

7. To create a new part, draw a circle on the datum plane of the drawing boss with a diameter of 10 and a given depth of 1.

8. Draw a circle on the top surface of the solid by stretching the boss, with a diameter of 3.2 and a given depth of 4.

9. Radius of fillet: 2.

10. Stop surface of molding tool: green surface; Face to be removed: pink face.

1 1. Save.

Pit forming tool

12. Draw a central rectangle on the datum plane with rounded corners: 1.

13. The given depth of the stretching boss: 3. Reverse; Draft angle: 45 degrees, draft outward.

14. Draw a central rectangle at the bottom of the entity by stretching the boss, and the given depth is 1.

15. Multi-radius fillet, radius: 2 and 3.5.

16. Stop surface of molding tool: green surface.

17. Save.

Hui Gui car body panel repair

18. Go back to the radius modeling and drag the stamping tool to the sheet metal.

18- 1. position, add labels and symmetrical geometric relations.

19. Drag the groove onto the sheet metal.

19- 1. position, add a note.

20. flatten.

2 1. Draw a point on the sheet metal surface.

22. Drag an M8 nut into. Do you want to try to build a derived part? Point: Yes. (This nut is the saving file of the standard parts of the toolbox. )

22- 1. Drag it onto the metal plate. If it is upside down, you can click it.

23. Work together. (This finding part is: moving/copying constraints in entities)

23- 1. Two sides: parallel bonding.

24. Draw a sketch on the sheet metal and transform the solid reference circle.

25. Stretch cut is equal to thickness.

25- 1. Done.

Assembly body

26. If nuts are added in the assembly, it will be easier.

27. Add a parallel fit.

28. Add coaxial center fit.

29. it's done.

30. Simply render it:

Then, today's sharing of "adding a nut to the guide groove reinforcement plate painted with SolidWorks" is over! Everyone must watch more, practice more, think more and learn more. I hope everyone can learn solidworks as soon as possible! ! Here, we also provide you with more courses to learn, click the link: