Often just completed the development or design of products need to do the board, the board is to verify the feasibility of the product is the first step, is to find out the design of the product defects, shortcomings, drawbacks of the most direct and effective way to improve the defects, until the individual board samples can not be identified from the shortcomings of the board. At this point, it is usually necessary to carry out a small batch of trial production to find out the shortcomings of the batch to improve. The design of the completed product generally can not be done perfectly, and even can not be used, direct production once defects will be scrapped, a big waste of manpower and material resources and time; and the general situation of the hand plate is a small number of samples, the production cycle is short, the loss of manpower and material resources, and quickly find out the shortcomings of the product design and improve the product finalization of the mass production of products to provide a sufficient basis for the ABS material is to do the hand plate with the widest range of hand plate, and at present the largest production, the most widely used hand plate. Currently the largest production, the most widely used polymers, abs will PS, SAN, BS of various properties of organic unity, both tough, hard, rigid balance of excellent mechanical properties. In short, abs is a thermoplastic engineering plastics with a wide range of uses.
The most used material is ABS, ABS material is also known as ABS engineering plastics, the appearance of opaque ivory-colored granules, its products can be decorated with colorful, and has a high degree of gloss. the relative density of ABS is 1.05 or so, the water absorption rate is low. the combination of ABS and other materials is good, easy to surface printing, coating and plating treatment I do the handboard are generally selected ABS low cost. Low cost, ABS has good electrical insulation, and almost independent of temperature, humidity and frequency, can be used in most environments, at the same time is a thermoplastic with excellent processing performance, can be processed with universal processing methods, widely used in automotive, electrical and electronic appliances and building materials, cell phone shells are also mostly made of ABS engineering plastics. In Zhongshan Xinrui hand plate production of the hand plate, with other materials when the cost is high, the boss will remind me to use ABS.