Preventing obd equipment from running out of power can be done with a knife to open a square hole, and then use file to play smooth, away from the bottom edge of the size of, does not affect the inside pin can be inserted into the boat switch, the boat switch is a self-card, it will not fall out of the original foot 1 on the 12V lead welded down, transfer to the boat switch on any one of the foot, the boat switch adjacent foot to the original OBD foot 1 can be connected to the boat switch. The boat switch can be connected to the original OBD pin 1 by soldering the 12V lead off the boat switch and transferring it to any pin of the boat switch.
OBD device use
The current vehicle OBD connector is often connected with anti-theft systems, vehicle monitoring systems, and environmental sensors, thus realizing the functions of antitheft, monitoring of information during the vehicle's driving process as well as around the parking area, and monitoring of the environment inside the vehicle, etc. However, due to the increasing number of connected devices, the power consumption is also starting to increase. However, due to the increasing number of connected devices, power consumption has also begun to increase dramatically, and the phenomenon of the vehicle running out of power after the vehicle has been turned off and unable to turn on is also becoming more and more common.
Car networking takes the car as the information terminal, integrates various types of sensors, establishes the interconnection of many different types of communication, realizes the seamless connection between perception and communication, and makes the information of the vehicle unit and the road monitoring system, traffic management system, logistics system, parking garage system, car repair, car rescue and other automobile 4S store service system, insurance system, and the road medical rescue system.