1, turn off the home's main water valve
First of all, we have to first find the location of the home's main water valve, because we are in the cleaning is to turn off the main water valve, the location of the main valve is normal will be placed in the kitchen locker inside the bottom.
2, equipment how to connect the home plumbing
Normally, there are hot and cold water pipes inside the home, so we chose to connect where there are hot and cold water pipes angle valve.
3, dismantle the faucet filter
After the equipment is connected, we need to dismantle some of the filtration systems as well as the filters at the faucet outlet so that the dirt and grime inside the pipes won't clog up the filters when we do the pulse cleaning.
4, connecting equipment
5, the concentration of the cleaning machine and the temperature of the configuration
Next we have to dissolve citric acid, which is our special configuration of the cleaning agent, edible, without any harm to the human body, take 1 kilogram of the cleaning agent than 15 kilograms of hot water to 20 kilograms of 40 degrees to 80 degrees, we through the pumping tube pumped to the inside of the tap water pipe.
6, how the home pipeline side leakage
Connect the equipment after we start the side leakage, first press the side leakage button, now all the faucets are closed. Look at the pressure, the pressure rises after it, to 4 kilograms it will automatically pause, this is the overpressure protection function of the device that now the pressure inside the pipe is fixed at 0.20 megapascals, what does it mean, that is to say that the pressure inside the pipeline is now 2 kilograms, that if it (the pressure value) did not fall, proving that the pipeline is closed, there is no water leakage, there is no breakage and no leakage.
7, detergent soaking
When we finished pumping liquid, all the taps to ensure that the flow of detergent, faucets out of the detergent is completed, it is necessary to let it soak in the pipe, 15-30 minutes.
8, detergent pulse cleaning
Assuming that 15-30 minutes have arrived, now we start pulse, we first open the main water valve for one-third, and then pulse, citric acid and dirt all washed out, there is a foul, sour taste. After the water out, we open the main valve, with water to clean each faucet to clean, then we clean the process is over.
9, the maintenance of equipment and water pipe reset
Now we have all the pipes in the user's home has been rinsed clean, each faucet has been cleaned, we now begin to collect the equipment, be sure to put all the things we have moved to load back, at the same time, we need to do some maintenance of the equipment, because we have just had a cleaning fluid through the equipment, pumped to the pipeline inside the equipment, there is now some residual cleaning residue inside the equipment. Now there is some residual cleaning agent, we prepare a bucket of water, according to the pumping function, with the water through the equipment once, after, and then open the pulse, the residual water in the equipment all flushed clean.