Precautions for the safe use of multifunctional electric medical beds

1, multi-functional electric medical bed before use, should first check whether the power cord is firmly connected. Controller line is reliable.

2, the controller linear actuator wire, power cord shall not be placed between the lifting rod and the upper and lower bed frame, so as not to cut the wire, resulting in accidents caused by personal equipment.

3, after the backboard is raised, the patient lies upside down on the panel, and is not allowed to push.

4, people can not stand on the bed surface jumping, backboard rise, people sitting on the backboard and stand on the bed panel, not allowed to implement.

5, universal wheel brake, not allowed to push and move, only after the release of the brake can move.

6, is not allowed to promote horizontal, so as to avoid lifting the guardrail damage.

7, the road surface is not flat can not be implemented, in order to prevent the multi-function electric medical bed universal wheel damage.

8, the use of the controller, the control panel keys, only one key to complete the action. Not allowed to press more than two keys at the same time to operate the multi-function electric medical bed, so as not to produce false action endangering the safety of patients.

9, multi-functional electric medical beds need to move, must be unplugged from the power supply, the power supply controller wire winding, before being allowed to promote.

10, multi-function electric medical bed to move, should lift the lifting guardrail, so as to avoid the patient in the process of moving fall and get hurt. Electric beds to move, must be two people at the same time operation, so as to avoid the implementation of the process of direction out of control, resulting in structural damage, and endanger the health of patients.