Alfa Laval high-speed centrifuge, compared with gravity sedimentation and membrane filtration, more rapid and better results. Liquid-liquid-solid three-phase separation in one step. Dirty oil, sludge and solid particles mixed into the cutting fluid can be quickly separated to improve the cleanliness of the cutting fluid and ensure machining quality; at the same time, it prevents wear and tear of the tools, reduces the consumption of cutting fluid and lowers the cost of treatment. Reducing cutting fluid consumption and waste fluid generation from front-end management, recycling cutting fluid, significantly reducing disposal costs, reducing the impact of waste fluid on the environment; at the same time, creating a safe and odorless working environment for operators.
1. Cutting fluid wastewater treatment equipment water-based cutting fluid purification system
Alfie centrifuge system quickly separates multi-phase media through the use of centrifugal force 5,000 times stronger than gravity than that in traditional settling tanks, which removes separation of cutting fluid impurities, prevents tooling wear and tear, and reduces the consumption of cutting fluid replacements to lower the cost of disposal.
Alfie can be installed as a bypass while the machine is running, without interrupting the machining process, and without any modifications to the existing equipment prior to use.
Alfie All functions are controlled by a PLC-based control system. The system is fully automated and can be used by simply operating buttons according to the manual, in a simple and clear control interface.
Alfie 500 Cutting Fluid Purification Experiment
2. Cutting Fluid Wastewater Treatment Equipment Oil-Based Cutting Fluid Purification System
Alfa Laval's Emmie series of centrifuges is a mobile, hydraulic, oil-contaminated purging system that removes all free water and 99% of the 2-5μm particles from the oil, resulting in longer service life and system reliability.
The Purifier mode is ideally suited for applications where the oil is heavily contaminated with water, as it continuously removes water. Centrifugal force separates solids from the oil and conveys them outward for easy removal. Water is continuously discharged from the bottom of the unit. If there is only a trace amount of water in the oil, the clarifier mode will block the outlet. You can switch modes in minutes.