What are the sound insulation and noise reduction methods for workshop equipment?

First, the equipment is treated with sound insulation and noise reduction. Usually, the whole equipment is covered with a soundproof cover. The multi-layer composite sound insulation cover can reduce the noise by about 30 decibels, which greatly reduces the indoor noise. The material and equipment combination of sound insulation cover plate should be determined according to the specific situation.

For vibrating equipment, the main noise control measure is vibration reduction. By installing a shock absorber and a shock absorber table on the equipment base. And the use of soft connections and elastic supports in connected equipment to minimize the generation and spread of equipment vibration.

Generally, after the noise reduction of the equipment itself is completed, the workshop will be decorated with sound absorption and sound insulation, and sound absorption and sound insulation materials and vibration reduction materials will be installed and laid on the walls, floors and ceilings of the factory building. Enhance the sound insulation effect of the workshop itself. The workshop doors and windows are sound-proof doors and windows, which should be sealed as much as possible, and a muffler should be installed in the ventilated place of the workshop to avoid all kinds of sound leakage problems.

As mentioned above, the noise control of industrial workshop is basically to sound-proof the noise source first, and then sound-proof it from the middle of the transmission path, and ensure that the noise in the workshop meets the requirements through sound absorption and sound-proof treatment. Improve the environmental sanitation of the whole factory.