For example, the auxiliary pusher, their auxiliary pusher base is particularly wide, this is certainly the use of time can be longer, the structure is also more stable.
Again, for example, their trolley clamping design, is not used next to a cylinder by the tie rod design, is directly behind the clamping barrel with a cylinder drive, this detail is also from the integrated force, service life considerations.
And the spindle with rack and pinion drive, they also specifically added a compression device, and rack and pinion special treatment, replacement is more convenient, even if the equipment is used for more than 10 years, rack and pinion gear gap on the accuracy of the impact is almost none.
Now do so many pipe bender, equipment to do not do a good job, one is to look at the design of the experience, the other is the manufacturer with no intention to do a good job
wrote so much, that is, they see to share out to everyone, but also to help this enterprise publicity in the meantime.
Back to the topic:
Not to talk about foreign equipment, domestic pipe bender good manufacturers: Taiwan and and Taiwan Qiaosheng, Taiwan Yinglin three needless to say. But do not do big machines
Continental side to do a good job, I just introduced the one, Fubon machinery, their maximum has been made out of 500 equipment. Doing very attentively.
Guoqing, is also an old brand, big equipment to do a good job.
Zhangjiagang side of the mixed bag, there are good and bad. He Feng, and Taiwan-funded He He is also doing a relatively large.
Zhejiang there is also a home Jinmaxun, as if the machine is quite attentive, but things are too expensive.