Tianfu: press the exit button on the remote control for 5-10 seconds to restore the default
Awas 2001 machine password: 1577
Kowloon DVC-2008IR initial password: 9949
Aerospace science series machine password: 6931
ap6-84 card password: xx96 can be
Nokia 8800 initial password 9949
AP6-84 card password: wherever with 96 can be! Even light input 96 is OK!
Domestic Fuso machine: up. Down. Left. Right
VISTAR2000 password 1234
News stations (3, 5, 6, 8) special machine DY2000S: up. Down. Left. Right
Tiba 901 engineering password: 1001
Tiba 901** password: 0000
Byson p-3900 machine password: 1111
Simon 920 Initial password:1234 Unified Eating Code:3453
The engineering password of Skyworth DVB-SO1 is: 13572468
RCA-993S:6931
v2.4blocker card adult password:9996
PBI 8888
Tianwu 1001
Gentech Prodigy Blind Scanning and Delete Channels Password:54321
P-3880 Default Password:0000. Universal Password
Recovery of the 3500 original: press the front version of the OK and channel at the same time on the two keys, the password for the first time for 0000.
v2.4blocker card adult password: 9996
Awas 2001 machine password: 1577
Kyushu DVC-2008IR initial password: 9949
Airtech series machine password: 6931
ap6-84 card password: xx96 can be
Nokia 8800 initial password 9949
AP6-84 card password: wherever with 96 can be! Entering 96 will also work!
National Fuzion machine: up. Down. Left. Right
VISTAR2000 password 1234
News station (3, 5, 6, 8) special machine DY2000S: top. Down. Left. Right
DiBa 901 engineering password: 1001
Yum p-3900 machine password: 1111
Simon 920 initial password:1234 Unified Eating Code:3453
DiBa 901 ** password: 0000
PANDA-610: Parent code: 0000/system code: 9317. Press and hold the first and
third key on the panel with your finger respectively before powering on, about one minute after powering up, release it, and use the system recovery menu to restore the system.
The initial password of Tongzhou 981 (engineering machine) receiver: input up and down in turn
Hikeway 6688, Hikeway 5688 blind scanning password: 1270
Transcend's senior user's open password: 13572468
2300 machine password and Esaote dual-chip machine is the same as that of the machine: 1111
PBI1000 recovery system password: 8888
430 of the original password of the parental lock: 1234. universal password: 6931
Haikouwei all machinery, Dongshi 2000H.2000F. Tiancheng part of the model, the setup method: menu - default was restored
Restore the factory settings -OK-Mute+Channel up key-Input 1270-OK, both can restore the blind scanning and prefabricated programs.
Gosbert all machinery, setup method: need to change the menu to English menu - select the default settings - OK -
Mute + channel on the key --Input up and down, left and right 1234--OK, both to restore the blind scanning and prefabricated programs.
Joystick 5518 chip and 2250 chip, setup method: open the main menu - directly input 305518 can restore blind scan
and prefabricated programs.
Dongshi 2000C, the film and television dragon and all-vision series, 2000Q nine painting king, setup method: menu - system settings
set - OK - - restoring factory settings - OK - - restoring factory settings - OK - - restoring factory settings - OK - - restoring factory settings - OK. -Restore factory settings -OK -Confirm restore -Press FAV key -OK, both can restore the blind -OK, both can restore the blind scan
and prefabricated programs.
Tiancheng's Xinmaiwei series and 619, setup method: Menu - Program Settings - OK - Add Programs
OK - in order to enter: the town frequency 11111, downlink frequency 22222, symbol rate 33333 - OK - restore the menu
Select the default settings -OK, both blind scanning and prefabricated programs can be restored.
Dijia Tiandi Star series recovery method is the same as the Heckwig series, except that the input password is 7065.
Wahl Red Sun series recovery method is, the menu - to restore the factory settings - OK - to confirm recovery
Left, right, left, right, right--OK, both to restore the blind scanning and prefabricated programs.
The new version of the Tongzhou 3188C setup method: Menu - System Settings - Default - OK - Press Menu to exit - Menu - Program Settings
Setup -OK-Press the information + channel key-Display input password input 0000 can be. (Some 1234 can also be)
Huangshi 2080 series setup method: open the main menu and directly enter 5168 can be restored
66 kinds of 134 models of satellite TV receivers password entry method
One, Huangshi
1, Huangshi 2080: in the "Transponder Setting "
2, Royal TV 2080A shockwave machine (V: 1.11); in the boot state with the remote control, press the "menu" button → TV
Screen Royal TV main menu → type in "530478", the TV screen display "system information, data storage ......",
To be displayed disappears, in the main menu of the Royal TV appears "Auto Search", the TV program in the set is automatically restored to the factory settings
Selecting "Auto Search" at this time, the TV program will be restored to the factory settings. At this time, select "Auto Search", set the corresponding parameters, you can carry out blind scanning.
3. HSR-2080A: Call up the main menu → enter the "Transponder Settings" item, and directly use the remote control to press
"1698" → the screen appears as "System Update", and then in the "Transponder Settings" item, the screen appears as "System Update". The word "System Update" appears on the screen, and then
"Auto Search" appears in the next column of "Program Edit" in the main menu, enter the column, set the parameters according to the corresponding parameters, and then press the "Confirm" button. Press the "Confirm" button again.
4. HSR-2080C: Move the cursor to "Transponder Setting" and input "1698" or "
5168" with the remote control numeric keys. "
5168
5. Royalview 2080/C: Menu→Royalview Main Menu→Transponder Setting→5168 or 235523 can be used.
6, the royal vision 2080 series setting method: open the main menu directly enter "5168" can be restored.
7, Royal View free machine method password 530478.
Two, Dongshi
8, Dongshi: (1) in the restoration of the factory press "1270". (2) Press the left button → "Favorite"
key when restoring the factory OK. (3) How to open the screen of each version of 9: Version 5.13: Right button → Confirmation button. 5.60: Rename button → Left
button → Confirmation button. 5.89: Right button → Left button → Rename button → Confirmation button.
9, Dongshi 2000Q to open the blind scan and 9 screen settings: press the menu → System Settings → Restore Factory Settings → Confirm Restore
(do not press confirm first), press the volume right key, then press the confirmation key to restore the factory state, then the machine is restored to
factory state, the 9-screen function is open: to carry out a second time to press the menu → System Settings → Restore Factory Setting→Confirm
Restore (don't press confirm first), press the favorite key, the machine restores to the factory state again, and the 9-screen and blind scanning are both opened
. Note: To use the 9 screen, directly press the "0" button; "Blind Sweep" please use the menu → Program Settings
Setup→Single Star Search 2.
10, Dongshi 2000Q: Press Menu→System Settings→Restore factory settings. (without pressing confirmation first) Press Volume Right, then
Press Favorite, then press Confirm to restore factory settings, then you can turn on the Blind Scan function.
11, Dongshi 2000C, Video Dragon and Allview series. Setting method: Menu→System Setting→OK→Restore Factory
Setting→OK→Confirm Restore→Press "FAV" key→"OK", then you can restore Blind Scanning and Preset Programs.
12, Dongshi 2000F/C: call out the main menu, enter the "system settings" item, click on "restore factory settings",
Press to confirm, the drop-down menu appears, in the absence of prompting, first press the remote control on the favorite button, and then press to confirm. If you are not prompted, press the favorite button on the remote control, then press confirm
and return to the "Program Settings" item, you can enter the "Single Star Search" column, set the parameters according to the corresponding parameters, and then press confirm
Confirm that you can.
Three, Colin:
13, Colin: (1) in the installation settings, power selection, press the "1" button 5 times. (2) During "Factory Restore"
Press "1" 5 times to restore all factory preset programs.
14, Colin K2838, KL-3383R: "Search" menu to "Transponder Settings", press the volume down key 4 times,
then press the mute key.
15, Colin, Nopes: Menu → Extended Menu → OK → System Settings → OK → System 2 → OK → Volume Down 4 times
→ Mute can be.
Four, Texas Kohai
16, Texas Kohai 5088: system recovery: press the left key → down key → down key → down key → down key → down key → left key → down key → and then press the down
key twice.
V. Kohai
17. Kohai 5088: System setup 1, press left key once, down key once, press left key again, press down key twice.
18, Kohai: blind scanning for "system setting 2", please enter the password; press the volume key 4 times, press the mute key once.
6, Technology Pioneer
19, Technology Pioneer GL506: press and hold the menu key → system setup → sub-menu appears → and then select "system setup" →
Confirmation → a dialog box appears, "system setup", "System Setup 2". To enter both systems, you need to enter the password:
That is, volume down→program number down→volume down→program number down→program number down→program number down (which can be abbreviated as: left
, down, left, down, down). After entering the password for "SYSTEM SETUP 1", Blind Scan and the entire
program schedule for 100.5oE appear.
Seven, Tiancheng
20, Tiancheng (Tiancheng 919, Xinmaiwei series and 619, Flying Dragon Digital Prince, Tiancheng Game King, etc.): When adding the program
, the frequency of the local oscillator will be set to "11111", the downstream frequency will be set to " 22222", symbol rate is set to
"33333", after confirming and then defaulting once, the satellite blind scan function and preset programs appear in the program menu.
21, Tiancheng digital satellite receiver (China Dragon) to increase the method of blind scanning: press the information button on the remote control for 3 seconds,
then press the menu → "program settings" can be.
22, Tiancheng China Dragon, Angel, Game King, Xidole, Lion King, Everest, Xiangge Xiangla, Dafu
Haojia, Good Year, Best, etc. (2005 production): press the information key for 5 seconds, the screen information disappears, while the
appears dialog box "whether to restore the default settings "Press the left and right buttons to change "Yes" to yellow and confirm to restore the
blind scanning function.
Eight, Tiancheng
23, Tiancheng machine password: 1001.
Nine, Jintek
24, Jintek small prodigy blind scanning and deletion of the channel password: "menu" ?ú enter the password: 54321.
25, Jintek Good Day", Gosbier to restore the external channel password: 5678.
26, Jintek D8000 (Good Day): bring up the main menu, enter the "Default Settings" item, select the "Default Language" < /p>
What is the default language? /p>
Language" is: Chinese, press the confirmation button. At this time, the screen appears to prompt the text: "Enter the password!" At this time, press the numeric key "5678" on the remote control
, then in the submenu of "Program Settings", there are more "Network Settings" and "Settings" and "Program Settings" in the submenu. "
Setup" two columns, enter the "Setup" column, according to the corresponding parameter settings, and then press "Confirm" can be.
27. Gintech D8000: Menu → Program Settings → "54321" (or "082004").
28, Gintech: menu directly enter 54321 or 5678.
X, XiyangYang
29, XiyangYang D8000: recovery of foreign TV programs and blind-scanning menu, in the menu screen, press the remote control button "08",
The password box appears. Input "2004", press "OK", at this time the menu will appear in the "automatic setup", which is
blind scanning.
Xi, Esaote
30, Esaote P-3900/E910 machine password: 1111.
31, Esaote 2300 machine password and Esaote double: universal password: 9876.
33, P3500 to restore the original settings: at the same time, press the front panel OK and the channel on the two keys, the password for the first time: 0000.
xii, Esaote 2300 machine password and Esaote double: universal password: 9876. p>
XII, E
34, E911S: the original password: 1234.
XIII, Chiancheng
35, Chiancheng 2100: 1234.
XIV, cp788 ...
36, cp7882-7885 machine universal password: 0000.
36, cp7882-7885 machine universal password: 0000.
37, cp7882-7885 machine universal password: 0000.
38, cp7882-7885 machine universal password: 0000.
37, cp7882 hidden menu to manually modify the key code: menu → universal interface → parental lock → red key → yellow key → enter
PIN code "0000" can be seen on the left side of the "V, I / B, N, S "V, I/B, N, S", select one of the system and press "OK"
You can edit the key code on the right side.
XV CDVB
38 CDVB2000E: Set 4 digits by yourself.
Sixteen, C-5880
39, C-5880: key to modify the entry code: 0000; universal code: 9876.
Seventeen, V2.4BLOCKER card
40, V2.4BLOCKER card adult code: 9996.
Eighteen, Avas
41, Avas 2001 machine password: 9949 or 1577.
Nineteen, Aero (Thunder) xSAT...
42, Aero (Thunder) xSAT310, 410, 420, 430, bolt2005 universal [password: 6931. parental lock original
beginning password: 1234.
43, xsat410xp, bolt410xp original code: 0000. repair code 64365577.
twenty, Nokia
44, Nokia 8800 initial password: 9949.
45, Nokia 8830 enter boot code: 1234.
46, Nopes satellite receiver system change password: left, down, left, down, down.
Xxii, AP-...
47, AP-84 card password: 9996.
48, AP6-84 card password: wherever with "96" can be, enter "96 " can also be.
Twenty-three, ANDA-...
49, ANDA-610: Parent code: 0000. system code: 9317. press and hold the first and
three keys on the panel respectively before powering on the computer, and then release it after about one minute after powering up, and then restore the system by using the system recovery menu.
Twenty-four, domestic Fuso
50, domestic Fuso machine: up, down, left, right.
Twenty-five, VISTAR2000
51, VISTAR2000 password: 1234.
Twenty-six, v889, vsat4300
52, v889, vsat4300 original code: 0000. repair code: 64365577.
Twenty-seven, News Channel (3.5.6.8) Specialized Machine
53, News Channel (3.5.6.8) Specialized Machine DY2000S: up, down, left, right.
Twenty-eight, Diba
54, Diba 901 engineering password: 1001.
55, Diba 901 ** password: 0000.
Twenty-nine, SIMON920
56, SIMON920 initial password: 1234. common code: 3453.
Thirty, PANDA-610
57, PANDA-610 (Panda 610): parental code: 0000, system code: 9317. before powering on, use your hand to press and hold
the first and third keys on the panel respectively, and then release them about one minute after powering up, and then restore the system with the system recovery menu.
Change the key code is 9317.
31. Tongzhou
58. Tongzhou 987 (engineering machine) receiver initial password, in turn, enter the upper, lower, left and right keys.
59. Tongzhou 5288 entry method: open the main menu → enter the transponder settings → press the channel key → information key →
0000 in turn.
60. Tongzhou 3188CSI: Menu → Program Settings → Program Plus → information key → channel key → password: 0000.
61. Tongzhou 3188C-S1: call up the main menu, enter the "program settings" item, in the absence of any prompts
, press the information key and the channel key, then the screen appears to prompt: "password!". . After inputting "0000" with the remote control
Press Confirm, "System Recovery" will appear on the screen, then return to the program settings and you will find more "Blind Scan" column, enter
This column will appear on the screen, and you will see the "Blind Scan" column. p>
Enter the column, according to the corresponding parameter settings, and then press the confirmation button, that is, blind scanning. Note: This machine cannot scan ku-band signals
.
62. Tongzhou 5288, etc.: menu → enter "156988".
63. The new version of the Tongzhou 3188C setup method: menu → system equipment → default → OK → press "menu" → exit the menu
→ program settings → OK → press the information key + channel key → display "enter the password", enter "0000". Enter "0000" (or "1234" in some cases).
64. Tongzhou: Menu → Restore Factory Settings → "No" to "Yes". Then input: 1234.
65. Tongzhou 3188C-S1, S2, D: Press "MENU" to enter the program settings, then press the information key, then press the channel key
, and input the password "0000".
66. Tongzhou 3188 ultra-thin model: Menu → Restore Factory Settings to: Yes. Domestic program password is "0000", the whole
partial program password "1234", but no blind sweep; power on directly long press the mute tone can receive all the programs and have blind
sweep.
67. Tongzhou 3188C Smart Star (CT212R chip): press and hold the "mute" 10 seconds, and then enter the menu will be more "
Auto Search" (i.e., Blind Scan).
68. Tongzhou 3288CSI: Menu→Program Setting→Program on→Info Key→Voice Channel Key→0000.
69. Tongzhou 3188E universal password: 991231.
32. Haikouwei
70. Haikouwei 5688 new version of the machine blind scanning password: 0000; the old version of the machine password: 1270.
71.
71.Heckwig (Uranus): press the mute button when restoring the factory, and input: 1270.
72.Heckwig HIC-3288C: enter the main menu, and use the number keys of the remote control to input "1270".
73. Heckway: 1270. menu → Mute.
74. Heckwell 3169, 6688, 5688, etc.: menu → system coordination → there is an exclamation mark icon in the triangle →
Press the remote control mute key → press the remote control "↑" key → please enter the password: 1270 → return to the "auto search" that is
Press the remote control mute key → press the remote control "↑" key → please enter the password: 1270 → return to "auto search" that is
Press the remote control mute button. The password for 6688 model is 0000.
75. Heckwig's latest slim model 6688D: Default setting→OK→Mute key→Sound channel→Up key→Enter "1270"
After entering "1270"
, then go back to the auto search can be.
76. Heckwig VEN-2188 receiver: use the remote control to open into the system setup options, select the "Default Settings"
setting", press OK to enter the "Restore Default Settings" menu, first press the remote control on the "Mute" button, then enter the "Restore Default Settings" menu. First, press the "↑" button on the remote control,
then press the green mute button on the upper left corner of the remote control, and then press the "↑" button, then the "Please enter the password"
The prompt box will appear.
The prompt box will appear, then use the remote control to input "1270". The machine restores the default settings. At this point, you can enter the auto
search menu.
77. Heckwell's other models (Dongshi 2000H, 2000F, Tiancheng part of the model), setup method: Menu → Default
recognition → Restore Factory Settings → OK → Mute + channel on the key → enter "1270" → OK, you can restore the Blind Scanning and preset
programs. program.
78. Receivers with Hicway software: System Setup→Default Settings→OK→Mute+Channel Up
Key→1270.
33. Haier Digital
79. Haier Digital (Regal, LvDongbin, etc.): Menu→System Setup→OK→Restore Factory Settings (Default Settings)→OK→Confirm (Screen Display) ) →Confirm →Confirm (screen please enter the password) → Enter "5678". After restoring the factory settings, you can have the
Blind Scan function and more complete multi-star TV program table
Satellite Digital Receiver Enable Passwords
1, ATV 5288 (Hikvision):
(1) First, press the "MENU" key of the remote control to enter the system setup, then press "OK" to enter the system setup. Press "OK" to enter.
(2) Enter "System Settings", select "Default Settings".
(3) The screen appears "Restore Default Settings" box, first press the remote control mute button, and then press the remote control direction "up" button
, then the screen appears "Please enter the password! The "Please enter the password" box will appear on the screen, and you can enter the password 1270.
2, ATV 2688: enter the default settings, press the mute button.
3, Zhuo Yi ZY5518Y (Oriental Dragon, small pigeon, small peacock, small handsome, etc.) blind sweep function: press the remote control menu key
. When the main menu of ZY5518Y appears, although there is no prompt on the screen, you just need to input the password, you can input the following groups of
passwords: 309700, 5168, 1698, 305518, because the passwords of different batches of machines are not the same, you can try one by one
one by one. If it is correct, there will be a "factory parameters recovery, please wait" prompt. This step is completed and then press the automatic search
Search, confirm that you can enter the blind scanning.
4, Zhuoyi → Flying Dragon: password 1234.
5, Tongda: program plus → press the volume down key 4 times → mute can be.
6, Little Prodigy, Challenger, etc.: Restore Factory Settings→Confirm and enter 6678.
7, Jingtian, Willas 2288, Nianhua, Canglang, etc.: Restore factory settings → Confirmation → Mute → program 7065 can be
.
8, Yuejia Aerospace, etc.: Restore factory settings → Confirmation → mute → program plus → 7065; menu press the mute button for 5 seconds
→ screen display "data storage" can be.
9, Skyworth DVB-SOI engineering machine: password 13572468.
10, Skyworth advanced users to open the password: 13572468.
11, RCA-993S password: 6931.
12, Horizon password: 1001.
13, DX680 password. 0000: 0000.
14, Changhong universal code: 138168.
15, Tongzhou 5288 access: open the main menu → into the transponder settings → press the channel key → information key
→ 00000 in turn.
16, Tongzhou 3188CSE: menu → program settings → program plus → information key → channel key. Password 0000.
17, Tongzhou 5288, etc.: menu → input 156988 can be.
18, Heckwig 5688 new version of the machine blind scanning password: 0000, the old version of the machine password: 1270
19, Heckwig (Uranus): in the restoration of the factory by pressing the mute key to enter the 1270
20, Heckwig HIC-3288C to enter the main menu, with the remote control numerical key to enter the 1270 can be.
21, Heckwig 3169, 6688, 5688, etc.: Menu → System Setting → there is an exclamation mark icon in the triangle
→Press the mute key of the remote control → press the "↑" key of the remote control → please enter the password: 1270 → return to the "Auto Search"
20, HIC-3288C enter into the main menu, use the number keys of the remote control to input 1270. "
You can. The entry system password of 6688 machine is 0000.
22, Heckwig's newest slim type 6688D: Default setting→OK→Mute key→Up key→Enter 1270, then return to
Auto search can be.
23: PBI1000: system recovery password 8888.
24: XSAT430's original password for parental lock: 1234; universal password: 6931.
25: ShenZhou 880S unlocking password: press the upper key on the panel once, the lower key three times, and the upper key twice.
26: PBI1000 dead recovery: press and hold the channel down key and power button for 1 minute.
27, CUHK digital machine: restore the default settings prompted to enter the password press 1, 2, 3, 4 or 5, 6, 7, 8.
28, 2003 Gosbel: Restore Factory Settings → Confirmation → Program Plus → Program Minus → Volume Plus → Volume Minus
→1234 can enter the blind scan function.
29, 2003 Yuejia, Aerospace, Canglang Nianhua: restoration of factory settings → confirmation → mute → program plus (the screen
displays "please enter the password") → press the password 7065 can be.
30, 2003 Di Jia Tong language → English → Restore Factory Settings → Confirmation → Mute → Program Plus → password is
7065.
31, 2003 Tianjing, Velocity, Restore Factory Settings → Confirmation → Mute → Program Plus (the screen displays "Please enter the password
) → password is 00 ") → password 0000.
32, 2003 Golden Eagle, Divine Eagle, Jiabao: in the state of shutdown press and hold down the menu key of the machine, and at the same time press the power on
off to the screen display menu, you can enter the blind scan function.
33, 2004 GOSBEL (Little Prodigy, Challenger): Restore Factory Settings → Confirmation (the screen shows "Please enter
Input Password"), the password is 5678. 5678 is also required to enter the password to enter the network search.
34, 2004 Yuejia, Aerospace to enter the After entering the menu, press the mute button for 4 seconds, the screen will show "data storage" and then you can enter the
blind scan function.
35, Taishin special machine set password: 2321.
36, Airenda press the menu → program settings → enter 8888.
37, Jiuzhou DVB-20981R: the initial password 9949.
38, Huangshi 2080: in the transponder setting press 5160, 1698, 156988.
38, Huangshi 2080: in the transponder setting press 5160, 1698, 156988.
38, Huangshi 2080: in the transponder setting press 5160, 1698, 156988. p>
39, Huangshi HSR, 20SOC will move the cursor to the "transponder settings" with the remote control digital input 1698 or 5168.
40, Dongshi: (1) restoration of the factory to press 1270. (2) restoration of the factory to determine the press the left button → Favorite button. (3)
The way to open the nine screens of each version: Version 5.13, right key→confirmation key: Version 5.60, rename key, left key, confirm
key; Version 5.98, right key, left key, rename key, confirm key.
41, Dongshi 2000Q to open the Blind Scan and nine-screen settings: Press Menu → System Restore Factory Settings → Confirm Restore (
Don't press OK first), press Volume Left and then OK to restore the factory state, this time the machine is restored to
factory state. Nine screen function on: for the second time, press Menu → System Settings → Restore Factory Settings → Confirm
Restore (do not press OK first) press the "Favorite Key", the machine is once again restored to the factory state, the nine screen and
Blind Scanning are turned on.
Note: Use the nine screen, directly press 0 on it, blind scan please use the menu → program settings → single star search 2.
42, Dongshi 20000: press the menu → system settings → restore factory settings (do not press OK first) press the volume right button,
and then press the Favorite button, and then press the OK button to restore the factory state, then you can open the blind scanning function.
43, Colin: (1) in the installation of settings, power selection, press the 1 key five times (2) in the restoration of the factory press the 1 key five times
Can be restored to all the factory settings of the program.
44, Tiancheng (Flying Dragon Counting Five, Tiancheng Game King, etc.): When adding programs, set the local oscillator frequency to 11111
, the downlink frequency to 22222, and the symbol rate to 33333, and then after confirming and defaulting once more, the satellite blind scan function will appear in the program menu
.
45, with Haikouwei (NicWay) software receiver: system settings → default settings → confirm → mute → channel
up key → 1270.
46, Jinteko Prodigy blind scanning and deletion of the channel password: 54321
47, Jinteko Xiyangyong: menu → system settings → automatic menu 08 press 2004 Confirm.
48, Jintek good day, Gosbel restore the outside station password: 5678.
49, Esaote P-3900/E910, Esaote 2300 machine password and Esaote dual-chip machine machine password: 0000, universal password:
9876.
50, P3500 to restore the original state: at the same time, press the front panel OK and channel on the two keys, the password for the first time for 0000.
51, Kohai (Texas) system left key, down key, left key, down key two times.
52, Avas 2001: password 9949 or 1577.
53, Nokia 8800 initial password: 9949.
54, AP-84 password: 9996.
55, AP-84 password: wherever with "96" can be, and enter 96 can also.
56, domestic Fujitsu machines: up and down.
57, VISATR2000 password: 1234.
58, the news station (3, 5, 6, 8) special machine DY2000S: up and down.
59, Diba 901* engineering machine: password 1001.
60, Diba 901*: 0000.
61, SIMON920 initialization password: 1234, universal code 3453.
62, PANDA-610 parental code: 0000; system code: 9317, before powering on the machine, respectively, press to the The first and third
key on the panel, release it about one minute after powering up, and use the system recovery menu to restore the system.
63, Tongzhou 981 (engineering machine) receiver initial password in order to enter the up and down left and right keys.
64, P-3800 default password: 0000, universal password: 9876