Specifications: 50ML/Stick
Color: Transparent/Black
Initial solidification speed: 10MIN
Full solidification speed: 24hours
Adhesive Substrate: Metal/Plastic/Glass
Non-Anaerobic Epoxy Structural Adhesive: It is a high strength epoxy resin. The product is a high-strength epoxy resin adhesive, which can provide a quick operation time of 5 minutes, greatly improving capacity in the production process. Super clear, high peel strength. Low odor epoxy adhesive. Suitable for most plastic, metal,, glass, ceramic and other products.
Packing specification: 50ml/2hg
Features;High strength fast curing
Color: Black Transparent
Typical use: non-anaerobic bonding, high strength
Viscosity CP:14000/25000
Recommended accelerators: N/A
Curing speed (initial/full curing). Initial curing 30 minutes Full curing 24 hours
Remarks: non-anaerobic structural adhesive
Product characteristics
1.This product is a fast curing series, transparent viscous epoxy resin adhesive;
2.Can be cured at low temperature or ambient temperature, fast curing speed; curing adhesive strength, hardness, good, with a certain degree of toughness;
3.cured material Good acid and alkali resistance, moisture-proof and water-proof, good oil and dust-proof performance, resistance to humidity, heat and atmospheric aging; the cured material has good insulation, compression, bonding strength and other electrical and physical properties.
Scope of application
1. Any need for rapid bonding and fixing of electronic or other products can be used;
2. Widely used in electronic components and crafts, gifts, bonding and fixing, for metal, ceramics, wood, glass and hard plastic encapsulation between the adhesive bonding, excellent adhesive strength;
3. Not applicable to the flexible or soft material products. It is not suitable for the bonding of elastic or soft material products.
How to use
1. The part to be bonded and sealed needs to be kept dry and clean;
2. Take the amount according to the ratio, A, B agent mixing needs to be stirred well to avoid incomplete curing;
3. After mixing, please inject the glue in time, and try to use up the mixed adhesive solution within the available time;
4. Curing During the curing process, please clean the containers and utensils in time, so as to avoid the glue solidifying on the utensils.
Shenzhen Ouyato Electronic Technology is sold