1. Determine the position and size of the aiming point. Depending on the actual need, you can choose a suitable location on the 808 picosecond's housing and then measure the size of the desired aiming point.
2. Shop for a suitable aiming point. According to the measurement results, choose a suitable aiming point. You can choose a compact laser dot or a larger marker.
3. Install the aiming point. Punch holes in the housing of the 808 picosecond and install the aiming point in the holes. It is important to note that the aiming point should be installed so that it is parallel or perpendicular to the laser output optical path of the 808 picosecond.
4. Adjust the aiming point. After installing the aiming point, it needs to be adjusted so that it coincides with the laser output optical path of 808 picoseconds. You can use the adjustment screw to make fine adjustments.
5. Test the aiming point. After installing and adjusting the aiming point, it needs to be tested to ensure its accuracy and stability. You can use target paper or other test tools to test.