Fix the chassis, align the pole of the fan with the hole in the chassis of the fan, insert it, and then tighten the screws well. Find the fan blades and the two half-circle covers so that the fan blades are sandwiched in between and secure the screws.
Steps: 1, the floor fan consists of several parts, fan cover, fan blade, motor and control gear system, support rod bracket, base. 2, the installation from the bottom to the top of the installation, the first installation of the base, the support rod bracket inserted into the base, screwed at the bottom of the base to fix the screws. 3, so that the support rod bracket and the base is connected to the one, you can continue to install it on the top of the 4, and then the motor and the control gear system inserted into the hole in the chassis, and then screwed. Then insert the motor and control gear system into the support bar bracket, there is a screw at the bottom of the back, tighten and fix it. 5, the fan cover is divided into front and rear parts, install the rear fan cover on the motor first, use the plastic big fixing nut to fix it, then install the fan blades, and also use the same big fixing nut to fix it. 6, the final installation of the front fan cover, first of all, the fan cover periphery of the edge of the edge of the cover, and then put the front fan cover into it, and then screw the screws of the edge of the fan cover to fix the front and rear fan cover. The front fan cover is then put into the front fan cover, and screw the screws of the side hoop to fix the front and rear fan covers. This is installed.