2. Then fill one side of a white square in the middle, extend a small circle of a brown square outward, and then change the middle and oblique angles of the four sides of the white square to black to indicate the scale of the alarm clock. Then put the hour hand and minute hand of the alarm clock in the middle. Behind the alarm clock, fill it with squares and put a big twist in the middle. You can make various shapes to adjust the alarm clock time.
3. At the top of the alarm clock, surrounded by light gray, the alarm clock began to whistle. In the miniature area of the alarm clock, in the middle of this area, before and after, is the main body of the alarm clock. Along this miniature area, continue to place two miniature areas upward. Then make a circle with the maximum size of 19x 19 at the front of the third layer miniature area.
4. Make two layers on this big circle, and then thicken the outermost layer. On the ring at the top of the alarm clock. Connect the big circles in the air and make them into the whistle shape in Spongebob cartoons. There are symbols in the lattice diagram.
5. In the middle of the whistle horn, make an arc with the width of the whistle, and then extend upward layer by layer according to the border in the picture. Starting from the bottom, lay the blocks layer by layer along the frame, and adjust the radian at the junction of the block sizes.
6. The whistle bell mouth is covered layer by layer along the finished frame. At the intersection of the horizontal whistle horn and the vertical whistle horn channel, the radian of the intersection can be appropriately adjusted to make it natural. The completed whistle horn should be accurately in the miniature area, then miniature and spliced in order and size.