Third-party independent testing organizations are currently only national and provincial levels, generally for the provincial software evaluation center. However, there are some companies set up software testing organizations to meet the requirements of the ISO17025 system to become a national or provincial software testing and evaluation center.
The address I sent you, Baidu hi
How can a company qualify for factory inspection? The first thing you need to do is to ask for a license to use the software.The Yangtze River Delta region tested ICTI factories or more, but basically need to consulting company counseling, otherwise it is difficult to pass, the need for a lot of documentation
ICTI document list
Serial number
ICTI document name
Serial number
ICTI form
1 Social Responsibility hand <
1 Temperature/Humidity Record Sheet, Wind Speed Test Record
2 Employment Procedures
2 Employee Representative Meeting Minutes and Election Records (every three months)
3 Procedures for Prohibition of Forced Labor and Prohibition of Use of Prisoners' Workers
3 Signature Sheet for Voluntary Overtime Work
4 Antidiscriminatory Procedures
4 Issuance of Workers' Compensation Supplies Records
5 Procedures for Prohibition of Child Labor, Procedures for Protection of Underage Workers
5 Records of Regular EHS Safety Meetings (every two months)
6 Procedures for Identifying and Controlling Processes of New Materials, Machines, and Equipment
6 List of Drugs/Use Records/Statistical Analysis of Injuries, and Records of Training
7 Procedures for Salary Programs, and Personnel Files
7 Emergency Team List/Photo p> 7 Emergency response team list/photographs
8 Temperature and humidity management program
8 Workshop safety responsibility person list/photographs, list of emergency contact phone numbers
9 Employee representative election method
9 Warning letter
10 Complaint program
10 Fire drill records (factory and dormitory), fire drill record point-to-point sheet
11 Reward and Penalty Control Procedures
11 Record of Note Taking
12 Procedures for Prevention of Blood Contact Transmitted Diseases 12 Drinking Fountain Hygiene Checklist
13 First Aid Procedures 13 Washroom Hygiene Checklist
14 Accident Investigation Procedures 14 Record of Inspection of Bathing Facilities, Eyewash Facilities
15 Confinement Control Procedures 15 Crane, Hoist, Ropeway Inspection Record Sheet
16 Hazardous Energy Identification Control Procedures 16 Building Structural Safety Inspection Record Sheet, Power Cord Safety Inspection Record Sheet
17 Corrective and Preventive Control Procedures 17 Kitchen Hygiene Record Sheet
18 Emergency Response Control Procedures 18 Emergency Lights, Fire Alarm Inspection Record
19 Laws, regulations and other documents collection and update control procedures 19 Light box type safety exit, fire extinguisher inspection records
20 Voluntary overtime guidelines 20 Fire hydrant inspection records
21 Guidelines for the use of labor protection equipment 21 Production safety training records, confined space training records
22 Temporary open flame operation procedures, hot work operation procedures 22 Factory discipline and factory regulations training records
23 Guidelines for Maintenance Staff 23 Chemical Training Records, Hazardous Waste Disposal Training Records
24 Guidelines for Noise Testing 24 List of Laws and Regulations and Updated Tracking Sheet
25 Kitchen Hygiene Management 25 First Aid Training Records, Medical Waste Recycling and Disposal Training Records
26 Hazardous and Combustible Materials Management 26 Maintenance Staff Training Records
27 Labor Contract Signing Guidelines 27 Training Records for Outsiders, Monitoring Records for Outsiders
28 First Aid Methods 28 Records of Application for Open Flame Work
29 Guidelines for Eyewash and Shower Work 29 Chemical Inventory, MSDS Information
30 Guidelines for the Use of Chemical Supplies 30 Maximum Load Load Load on Floor and Height Limit
30 Guidelines for the Use of Chemical Products Height Limit
31 Guidelines for Fire Fighting Facilities 31 Maintenance Records of Machinery and Equipment (Level 2 & 3)
32 Guidelines for Septic Tanks 32 Records of Sharps Issuance and Recycling
33 Guidelines for Disinfecting Fluid 33 Records of Fuel Injector Filter Inspection
34 Guidelines for Security Codes and Duties 34 Records of Security Guard Training
35 Employee Handbook, Factory Rules, Dormitory System 35 Hazard Assessment Record Sheet for New Equipment, Materials and Processes
36 EHS Guidelines for External Personnel 36 Hazardous Energy Assessment Record Sheet, Labor Safety Assessment Record Sheet
37 Environmental Health Policy 37 Employee Basic Information Sheet, Employment Contract
38 Notice to Visitors 38 Employee Leave Form
39 Fire Fighting Training Information Information 39 Employee Resignation Form
40 Set of Laws and Regulations 40 Attendance Records and Payroll for a Full Year
41 Factory Floor Plan and Fire Plan (Inside of Each Safety Exit) 41 Contract for Cafeteria and Security Guard
Required Certificates and Reports
Serial No. Certificates/Reports Serial No. Certificates/Reports
1 Business License 17 Security Director's qualification certificate (appointment letter, training completion certificate)
2 Health license (address is company name) 18 Underage worker registration certificate (if any)
3 Cook's health certificate 19 Comprehensive timekeeping (overtime) approval
4 Physician's qualification certificate (for factories of 500 people or more) 20 Water quality (production, drinking water) test report
5 Environmental protection approval 21 Workshop toxic and hazardous air test report
6 Construction Fire Acceptance 22 Noise Test Report
7 Construction Completion Acceptance / Real Estate Certificate 23 Qualified organization on the fire fighting equipment inspection voucher
8 Social Insurance Payment Record voucher, list of contributors 24 Qualified organization on the industrial waste recycling agreement and vouchers (quintuplets) < /p>
9 Social insurance to meet the current requirements of the certificate 25 Hazardous waste industrial waste recycling unit qualification certificate
10 Social insurance annual review certificate 26 Qualified organizations on the medical waste recovery agreement and vouchers
11 Special equipment registration certificate, acceptance, annual review certificate 27 Qualified organizations on the agreement on the recycling of household waste and vouchers
12 Special types of work Induction certificate (elevator, air compressor, electrician, boiler, forklift) 28 Agreement on septic tank cleaning and cleaning voucher from qualified organizations
13 Certificate of medical examination for occupational diseases 29 License for domestic sewage, industrial sewage, exhaust gas and noise discharge
14 Security guard induction certificate and firefighting induction certificate 30 Air emission test report
15 First-aiders' qualifications 31 Qualification certificate for external Qualification certificate of construction workers (welders)
16 Floor load-bearing certificate (plant design unit) 32 Lightning protection facilities qualification test report, lightning protection certificate
Necessary hardware configuration
No. Hardware No. Hardware
1 Eyewash, showers (in areas where a large number of chemicals are used) 12 Medicine box and first-aid medicines (on each floor)
2 Temperature and humidity meters (each workshop with workers)
13 Machine equipment guards
3 Wind speed tester 14 Guardrails on the roof and on each floor (open)
4 Wheel fixtures (at parking areas) 15 Ladder safety handrails (more than 1M)
5 Fire-fighting facilities (fire extinguishers, hydrants, alarms) 16 Lightning protection devices
6 Emergency lights, Safety exit signs (light box type/luminous type)
7 Explosion-proof lamps (warehouses, chemical silos, spray cabinets, oil mixing rooms, etc.) 18 Hazardous waste industrial garbage cans (iron with lids)
8 Explosion-proof switches, extractor fans (chemical silos) 19 Domestic and medical garbage cans
9 Automatic bulb-type fire extinguishers (chemical silos) 20 Labor protection supplies (earplugs, eye masks, masks, gloves, etc.)
10 Secondary containment devices (chemical silos, areas where chemicals are used) 21 Wide-angle mirrors (where there is a turn in the plant)
11 Conductive devices (chemical silos, large drums of oil) 22
Posting of signs
Sequence of signs Sequence of signs
1 Height limit (warehouses, workshops) (warehouse, workshop) 10 Wear labor insurance reminders
2 Floor loads (each floor) 11 Three types of trash cans
3 Weight limits (elevators, hangers) 12 Emergency assembly area for fire drills
4 Speed limits (at the entrance to the plant) 13 Various hazards reminders (high temperature, electricity, bumps on the head, falls, etc.)
5 Non-safety exits 14 A list of emergency contact phone numbers, First Aiders and Employee Representatives Contact List
6 No Smoking or Fireworks (Workshop Entrance and Areas where Flammables are Stacked) 15 Fire Fighting Floor Plans
7 Fire Extinguishers, Alarm Bells, Pill Boxes, Eyewash/Shower 16 Direction of Escape, Fire Fighting Equipment, and Prohibited Areas Below Electricity Boxes
8 Electricity Boxes and Switches 17 Confined Spaces
9 Machine Maintenance, Don't Close Gates 18
ICTI employees are reminded of the importance of maintaining a safe and secure environment. p>
Mandatory Training Items for ICTI Employees
No. Training Contents Article Section Participants
1 Factory Rules and Regulations and Wage and Hour Policies
2 Machine and Equipment Maintenance Safety Training 9.5 Mechanics and Electricians
3 Emergency Response Training Emergency Drills and Training 9.6 All Employees
4 Security Personnel Training 9.18 Security Guard
5 EHS Coordinator Training 10.3 EHS Coordinator
6 Gas Cylinder Use and Protection Training 10.27 Gas Cylinder Operator Employee
7 Fire Extinguisher Knowledge Training 10.35 All Employees
8 Environmental Health and Safety Training/Education 11.6 All Employees
9 Chemical Safety Training Transferring Flammable Liquid Extraction Training 11.11 All Employees
10 Machine Safety Training 11.19 All Employees
11 Lockout, Tagout, Test Activation (LTI) Procedure Routine Training 11.26 Mechanics, Electricians
12 PPE Training (Personal Protective Equipment) 11.31 All Employees
13 Lifting Machine Usage Training 11.33 Lifting Personnel
13 Lifting Machine Training 11.33 Lifting personnel
14 Confined space training 11.43 Confined space training
15 Food preparation hygiene training Catering staff
16 Handling and disposal of medical waste First aiders
17 First-aid knowledge training Some employees
18 New machines and materials New energy training All employees
Application Third-party software system acceptance testing cma what testing work is requiredAcceptance testing is used to verify that the system meets the requirements of the user requirements specification (which may include project or product acceptance guidelines), the test hopes to find out as much as possible in the defects that remain in the system, so as to provide help for further improvement, and to ensure that the system or product is ultimately accepted by the user. It mainly includes ease of use testing, compatibility testing, installation testing, documentation (e.g., user manuals, operation manuals, etc.) testing and other aspects of the content. It is recommended that you can go to a professional testing network to see (for example, 51Testing testing network) on which there is a very detailed acceptance test related information ~
Le phone how to download to get the third-party software?Download through the cell phone application store or PC landing on the official website of the Lenovo Application Store
How to get food testing qualification of third-party testing organizationsAccording to the "People's Republic of China *** and the State Measurement Law," the provisions of Article 22: "for the community to provide notarized data on the quality of the product inspection agency, must be the people above the provincial level *** Measurement of administrative departments The ability and reliability of its metrological calibration, testing assessment of qualified." Therefore, all the product quality supervision and inspection organizations and other types of laboratories that issue impartial data to the community must obtain China Metrology Accreditation, that is, CMA certification. Then, the third-party testing organizations to apply for CMA qualification steps are as follows:
The first step: register the company, different regions for the registered capital is also required, at least 500,000 registered capital;
The second step: the completion of the industrial and commercial registration, the need to purchase instruments and equipment and recruitment of chemical analysis engineers. Instruments must be national standards for chemical analysis instruments, to have CMC certified instruments. The basic instruments are equipped with: gas chromatograph, spectrophotometer, soap film flowmeter, analytical balance, atmospheric sampling instrument, radon meter, drying oven, etc.;
Step 3: the personnel need at least one chemical analysis senior engineer, several chemical analysis engineer title;
Step 4: for at least three months of trial operation, the establishment of a complete laboratory management system, and then apply for metrological certification to the provincial level Quality Supervision Bureau to apply for metrological certification;
Step 5: Provincial Quality Supervision Bureau Certification Office will notify you when to come to the on-site review;
Step 6: on-site review (which is the most critical), if the application for accreditation of the project is small, generally come to the two people, a team leader responsible for the inspection of the quality system, an expert is responsible for the inspection of the technical aspects.
Step 7: On-site review will generally open some unqualified items, as long as it is not too much, generally no problem. First, there will certainly be more or less problems, and secondly, to reflect the level of experts. So there will certainly be some unqualified items;
Step 8: unqualified items for rectification, at least one month. One month after the rectification is completed, the relevant written proof will be submitted to the team leader.
Step 9: Wait for the promulgation of the CMA measurement certificate!
In accordance with the "Measures for the assessment of agricultural quality and safety testing organizations" and "the Ministry of Agriculture Product Quality Supervision, Inspection and Testing Organization Review and Accreditation Rules" of the requirements of the assessment of agricultural quality and safety testing organizations, institutional review and accreditation and national metrological certification Guidelines for Accreditation of Food Inspection Agencies 1.General 1.1 For the implementation of the "People's Republic of China **** and the State Food Safety Law ", "People's Republic of China *** and the State Food Safety Law Enforcement Regulations", "People's Republic of China *** and the State Certification and Accreditation Regulations" and other relevant laws and regulations to standardize the accreditation of food testing organizations accreditation assessment activities, based on the "Management of Food Inspection Agency Accreditation" and "Food Inspection Agency Accreditation Conditions," the development of this guideline. 1.2 In the People's Republic of China **** and the State, engaged in the social issuance of data and results with the role of proof of the accreditation of food testing organizations should comply with the assessment of the Guidelines. 1.3 The food inspection agency referred to in these Guidelines, refers to the establishment of the law or approved, engaged in food inspection activities and issued to the community with the role of proving the test data and results of the inspection agency. 1.4 Certification and Accreditation Administration of the National Certification and Accreditation Administration of the provinces, autonomous regions, municipalities directly under the Central People's *** Quality and Technical Supervision Department in accordance with the guidelines on the implementation of the basic conditions of food testing organizations and ability to implement the evaluation of food inspection agencies in line with the provisions of laws, administrative regulations and the requirements of this guideline issued by the accreditation certificate of food inspection agency. 1.5 Food inspection agency accreditation review, should follow the objective and fair, scientific and accurate, uniform and standardized, conducive to the detection of resources *** enjoy and avoid unnecessary duplication of the principle. 1.6 Food inspection agency accreditation assessment (including food inspection capabilities of comprehensive inspection agency accreditation assessment), according to "Laboratory Accreditation Review Guidelines" and the "Guidelines" at the same time. 2.Reference Documents "Chinese People's *** and State Food Safety Law" "Chinese People's *** and State Food Safety Law Implementation Regulations" "Chinese People's *** and State Certification and Accreditation Regulations" "Management Measures for the Accreditation of Food Inspection Agencies" "Laboratory Accreditation Review Guidelines" "Food Inspection Agency Accreditation Conditions" 3. Terms and Definitions This guideline uses the relevant terms and definitions given in "Measures for the Administration of Accreditation of Laboratories and Inspection Organizations", "General Requirements for the Competence of Testing and Calibration Laboratories" (GB/T27025:2008), "General Requirements for the Competence of Various Types of Inspection Organizations" (GB/T18346:2001), as well as the general terminology of laboratories. 4.Management Requirements 4.1 Organization 4.1.1 Food inspection agency should be established by law (registered) or relatively independent inspection agency, able to assume legal responsibility. 4.1.2 Non-independent legal person food inspection agency should be its legal representative of the legal body or its authorized personnel responsible and accountable. 4.1.3 Food inspection agency shall use officially employed inspectors, inspectors can only practice in a food inspection agency. Food inspection agency shall not employ laws and regulations prohibit food inspection work of personnel. 4.1.4 Carry out animal testing of food inspection agencies, should be obtained at or above the provincial level laboratory animal management department issued a "Certificate of Qualification of Laboratory Animal Environmental Facilities"; self-produced and self-use animal testing organizations must have a "Laboratory Animal Production License" and "Laboratory Animal Quality Certification. 4.2 Food inspection agency should have one or more of the following test capabilities: a) a class or more types of food-related food safety standards for the test items specified in the test, including physical, chemical and all microbiological items, including food additives and nutrient fortification test; b) a class or more types of food additives related to food safety standards for the test items specified in the test, including Physical, chemical and all microbiological items; c) can be a class or more types of food-related products of food safety standards for the test items, including physical, chemical and all microbiological items; d) can be contaminants in food, pesticide residues, residues of veterinary drugs and other general categories of food safety standards or relevant provisions of the requirements of the test items to be tested; e) can be a food safety accident causative factor identification f) for food safety risk assessment and administrative licensing for food safety toxicology evaluation; g) can carry out "Food Safety Law" stipulates that other inspection activities. 4.3 Food inspection agency quality management system should be established, operation should be consistent with these guidelines and "laboratory accreditation assessment guidelines" requirements. 4.4 Food inspection agency should be based on "Food Safety Law", for the inspection activities carried out, the development of the corresponding test accountability system, test data file management system and food safety emergency inspection plan. 4.5 Undertake *** entrusted supervision and sampling, food safety risk monitoring and assessment tasks such as food inspection agency should also develop the corresponding work system. 5.1 Technical Requirements 5.1 Personnel 5.1.1 food inspection agency should have its inspection activities carried out by the appropriate inspection personnel and technical management personnel. 5.1.2 Inspection personnel and technical management personnel should be familiar with "Food Safety Law" and its relevant laws and regulations and relevant food safety standards, principles of testing methods, to master the test operation skills, standard operating procedures, quality control requirements, laboratory safety and protection knowledge, measurement and data processing knowledge. 5.1.3 Inspectors and technical managers should be "Food Safety Law" and its relevant laws and regulations, quality management and relevant professional and technical training, assessment, and hold a certificate of competency in training and assessment. 5.1.4 Engaged in animal testing inspectors should obtain "animal testing practitioners certificate"; engaged in special testing programs (radiation, genetic testing) of personnel should meet the requirements of relevant laws and regulations. 5.1.5 engaged in food inspection activities should be licensed personnel. Inspection personnel with intermediate or above (including intermediate) professional and technical titles or equivalent capabilities should be not less than 30% of the proportion of personnel. 5.1.6 Food inspection agency technical managers should be familiar with the business, with related professional intermediate or above (including intermediate) technical title or equivalent ability, engaged in food inspection-related work for more than 3 years. 5.2 Facilities and Environment 5.2.1 Food inspection agency should have a fixed inspection workplace and dedicated to food inspection activities required for refrigeration and freezing, data processing and analysis, information transfer facilities and equipment and other working conditions. 5.2.2 Food inspection agency's basic facilities and working environment should meet the test methods, instruments and equipment for normal operation, technical file storage, sample preparation and storage and other related requirements. 5.2.3 Experimental areas should be separated from non-experimental areas. Neighboring areas of mutual influence should be effectively isolated, showing the need to control the scope of the region. Prevent cross-contamination, ensure personal health and environmental protection requirements. 5.2.4 Microbiology laboratories should be equipped with biological safety cabinets, experimental activities involving pathogenic microorganisms should be based on the State Council's "Pathogenic Microorganisms Laboratory Biosafety Regulations" in the appropriate level of biological safety laboratories. 5.2.5 animal testing of food inspection agency should meet the following conditions: a) temperature, humidity, ventilation and lighting control and other environmental monitoring facilities; b) an independent laboratory animal quarantine room; c) with the development of animal experiments to carry out the project appropriate disinfection and sterilization facilities; d) collection and placement of animal excreta and other waste facilities; e) for the separation of different strains of animals and different experimental projects required for breeding, isolation of diseased animals, etc. Animals, isolation of sick animals and other independent space required; f) to carry out volatile substances, radioactive substances or micro-organisms and other special animal experiments, food inspection organizations should be equipped with special animal laboratories, and equipped with appropriate protective facilities (including air exchange and sewage system), and completely separated from the regular animal laboratories. 5.2.6 Toxicology laboratory should be equipped with environmental requirements for the storage and handling of positive controls of the facilities. To carry out in vitro toxicology testing laboratories should have enough independent space for microbial and cellular genotoxicity experiments, and in line with national requirements related to laboratory biosafety. 5.3 Food inspection agency should have to prevent the original data records and reports damage, deterioration and loss of measures. Such as the use of computers and information technology or automated equipment systems for testing data, information collection, processing, analysis, recording, reporting or storage, there should be to protect its security, integrity measures, and the corresponding verification records. 5.4 Instrumentation and standard substances 5.4.1 Food inspection agency should be equipped to meet the test activities carried out by the necessary instrumentation, sample pre-treatment devices and standard substances (reference substances) or standard bacteria (toxins) species and so on. 5.4.2 Food testing organizations use instruments and equipment (including software), standard substances (reference substances) or standard bacteria (viruses) species, etc. have a person to manage to meet the traceability requirements. This accreditation guidelines since November 1, 2010 shall come into force.
Undertake to third-party software testing work, what you need to prepare1, funds: this is the basis for the start, if you want to do a big must have this basis for a large project to do half a year, a year, the project payment first 20%, no funds to support the people can not live;
2, qualifications: there are national standards in this regard, go check it out, the different levels of qualification to enter the industry level is different, of course, the difficulty of obtaining the qualification is also different. Different, of course, the difficulty of obtaining the qualification is also different;
3, specification: the work process should be standardized to have a complete software testing and software engineering specification documents, if the other party in line with the CMMI, you also need to provide a collection of specification documents at the appropriate level;
4, personnel: as long as the third party to earn money to make money, to make money to contact the customer to contact customers to contact the customer to have good relations with the other hand To understand the business, so the sales staff, demand staff and program designers is the first, and then the testers;
5, tools: there are many testing projects require the use of specific tools, these tools must be genuine, or one day to be investigated you will regret the use of pirated;
6, psychological: to do a good job of all kinds of negative results of the psychological preparedness, but also to have confidence and determination!
If you are just a few of their own or friends to take a few relatives and friends, it is different so troublesome, it is a relationship to raise people, but do not do much to be standardized, institutionalized, corporatized, group.
I hope you can help.
How to get trustedinstaller permissions under win8 (not with third-party software)win8 trustedinstaller permissions are the highest level of permissions in the operating system, one level higher than the system's default administrative permissions.
Sometimes when you need to modify or delete some system files/folders on the C drive, you will get a popup saying "You need the permissions provided by TrustedInstaller to modify this file"
The default state of the highest TrustedInstaller administrative privilege is not activated, so if you want to get trustedinstaller privileges, you can do it by using a third-party software.
The highest level of TrustedInstaller privileges are not activated by default, so you need to activate them if you want to use TrustedInstaller privileges to gain maximum control over your computer
System.
How to get the administrator password without using third-party softwareYou can choose to enter Press F8 to enter Safe Mode with commands, and use the NET command to modify. The format is as follows: NET USER ADMINISTRATOR (i.e.: administrator account) 123456/add
I want to do a third-party testing of system software, need to have a qualified third-party software testing companies to issue a report, I do not know which unit should I look for?Hello!
Please refer to:
Third-party independent testing organizations are currently only national and provincial levels, generally for the provincial software evaluation center. However, there are some companies set up software testing organizations to meet the requirements of the ISO17025 system to become a national or provincial software evaluation center.
Information application systems engineering generally has a strong industry background, the third-party testing organization should preferably have the same or similar engineering testing experience, in order to facilitate the completion of the functional testing of systems engineering.
The scale of modern information application systems is getting bigger and bigger, and the testing environment and testing tools have a decisive impact on the efficiency and effectiveness of testing. In the selection of third-party testing organizations, should be given priority to choose a perfect test environment and advanced testing (management) tools company.
The qualification and quality of the test engineers of the testing organization have a great impact on the actual work efficiency, and priority should be given to the third-party testing organization that has a full range of test engineers and mastery of testing tools.
1. Third-party test engineering classification
According to the characteristics of the software, the third-party software testing engineering can be divided into three types.
(1) system software, environmental software and various types of tools such as software evaluation: most of this type of software as a computer environment or "public" support software, product type, market sales and production of many manufacturers. Products are characterized by most enterprises, and even international product quality standards. Users want to choose the product features, performance comparison test, this type of software evaluation focuses on the function, performance and characteristics of software products.
(2) application-oriented software system evaluation: this type of software has a strong industry application characteristics, often by the user and the developer to sign a project contract. The developer is responsible for the development, the user is responsible for acceptance. Similar to the traditional engineering project construction process, the introduction of software engineering supervision mechanism is obviously necessary. In China, the software engineering management approach that introduces independent third-party quality evaluation and process control has proved to be successful. The evaluation of such software can be further divided into two levels according to the degree of user dependence on the third party. Comprehensive functional and performance testing of application software systems only: largely black-box testing at the software system level, with no control or supervision of the software process. Application software system quality supervision and evaluation: not only to undertake the tasks of the first level, but also to monitor the software process, with the responsibilities of the primary software engineering supervisor.
The third party responsible for this type of software quality assessment of the software process quality supervision responsibility, in the software life cycle process from the beginning of the software definition, the software process from the quality assurance point of view to standardize the supervision, management and control. Evaluation work not only includes the review of the software life cycle stages, but also to the system, including module white box testing, including system integration and system acceptance testing.
(3) the software enterprise's CMM assessment and certification: CMM level certification, is an enterprise on the definition of its software process, management, metrics, control of what kind of effective ability to achieve a kind of evaluation, is to ensure that the quality of the software product basis. Obviously, the software enterprise CMM level certification, is the highest level of software evaluation.
2. Third-party test engineering environment construction
Third-party test engineering environment construction, including the establishment of software evaluation site, provide testing and evaluation and analysis of the required equipment, software and tools. Such environment includes representative operating systems, support platforms, middleware, and network environments in order to simulate distributed applications, in addition to version management tools and specialized testing tools.