Article 1 In order to strengthen the supervision and management of special equipment operators, standardize the operator assessment and licensing procedures to ensure the safe operation of special equipment, according to the "Chinese People's Republic of China *** and the State Administrative Licensing Law", "Regulations on the Safety Supervision of Special Equipment" and "The State Council of the State Council on the administrative examination and approval of the project to be retained set up an administrative licensing Decision", the development of this approach.
Second boilers, pressure vessels (including cylinders), pressure piping, elevators, cranes, passenger ropeways, large amusement rides, field (plant) and other special equipment operators and their related management personnel collectively referred to as special equipment operators. Special equipment operators work with the project directory of types and items attached to this approach.
Personnel engaged in special equipment operations should be in accordance with the provisions of this approach, after the examination and qualification to obtain "special equipment operators license" before engaging in the corresponding operations or management.
Article 3 of the State General Administration of Quality Supervision, Inspection and Quarantine (hereinafter referred to as AQSIQ) is responsible for the supervision and management of the national special equipment operators, quality and technical supervision departments above the county is responsible for the supervision and management of special equipment operators within the jurisdiction.
Article IV of the application for "special equipment operators license" of the personnel, should first be designated by the licensing department of special equipment operators examining organizations (hereinafter referred to as the examining body) to register for the examination; passed the examination, with the results of the examination and the relevant materials to the licensing department to apply for review and issuance of certificates.
Article V special equipment production, use of units (hereinafter collectively referred to as the employer) should be employed (hired) to obtain a "special equipment operators license" of personnel engaged in the management and operation of the relevant work, and the operators to carry out strict management. Special equipment operators should be licensed to work, according to the rules of operation, and found that the hidden danger of timely disposal or report. Chapter II examination and review of licensing procedures
Article VI of the special equipment operators assessment and licensing work by the county above the quality and technical supervision departments are responsible for grading, the specific scope of grading by the provincial quality and technical supervision departments to decide, and published within the province. For a smaller number of pressure vessels and pressure pipelines with pressure sealing, oxygen tank maintenance, long-distance pipeline safety management, passenger ropeway operations and management, large-scale amusement ride installation operations and management of the operator's assessment and licensing work, by the State Administration of Quality Supervision to determine the examination institutions, unified organization of the examination, the equipment by the location of the quality and technical supervision departments to review and issue certificates.
Article VII of the special equipment operators examining organizations should have the appropriate place, equipment, teachers, invigilators and a sound test management system and other necessary conditions and capabilities, approved by the licensing department, can undertake the examination. The licensing department shall supervise the examination organization, found that the problem is dealt with promptly.
Article VIII of the special equipment operators test and review the licensing procedures include: examination registration, examination, licensing applications, acceptance, review and issuance of certificates.
Article IX of the licensing department and examination bodies should be published in the office of this approach, examination and review of licensing procedures, the type of test operators, specific conditions for the examination, the basis for fees and standards, the name and location of the examination body, the examination plan and other matters. Among them, the examination registration time, examination subjects, examination location, examination time and other specific examination program matters, should be held on the date of the examination 2 months before the announcement.
Conditions should be published on the relevant website, the news media.
Article X applies for "special equipment operators license" shall meet the following conditions:
(a) age 18 years old or older;
(b) physical health and meet the application to engage in the types of operations on the special requirements of the body;
(c) with the type of application for the type of work appropriate cultural level;
(d) with the type of application for the work appropriate;
(d) with the type of work appropriate.
(e) have appropriate safety technology knowledge and skills;
(f) meet other requirements stipulated in the safety technology specification.
The specific conditions of the operators shall be implemented in accordance with the provisions of the relevant safety technical specifications.
Article XI of the employer shall strengthen the operator safety education and training to ensure that special equipment operators have the necessary knowledge of special equipment safety operations and operational skills. No training capacity, you can entrust the licensing department to organize training. Operator training content in accordance with the State Administration of Quality Supervision, Inspection and Quarantine of the relevant operators to develop training and assessment of the syllabus and other safety specifications.
Article XII of the eligible applicants should be submitted to the examining authority to submit the relevant supporting materials, enroll in the examination.
Article XIII of the examination body shall develop and conscientiously implement the examination of special equipment operators to organize the work of the rules and regulations, in strict accordance with the principle of openness, justice and fairness, the organization and implementation of special equipment operators to ensure the quality of the examination work.
Article XIV of the end of the examination, the examination organization shall, within 20 working days of the examination results to inform the applicant, and publish the results of the examination.
Article XV of the examination, with the test results notification form and other relevant supporting materials, to the licensing department to apply for the "special equipment operators license.
Article XVI of the licensing department shall be submitted within five working days to review the materials, or inform the applicant to correct the application materials, and make a decision on whether to accept. Can be reviewed on the spot, shall be handled on the spot.
Article XVII of the application agreed to accept, the licensing department shall complete the examination and approval procedures within 20 working days. Permitted to issue a license, within 10 working days to the applicant issued "special equipment operators license"; not licensed, shall state the reasons in writing.
Article XVIII of the special equipment operators to follow the examination and licensing of people, open and efficient principle. In order to facilitate the applicant for the assessment of licensing matters, the licensing department can accept and issue certificates of acceptance of the location of the test registration site, and in the registration test commissioned by the examination body to examine whether the applicant meets the conditions of the application for review, after passing the examination, the licensing department can be directly for the acceptance of the formalities and audits, the issuance of certificates of acceptance of the matter. Chapter III certificate use and supervision and management
Article 19 holds the "special equipment operator certificate" of the personnel must be employed by the employer's legal representative (person in charge) or its authorized person to hire (hire) before the project can be licensed to operate within the scope of the project.
Article 20 of the employer shall strengthen the special equipment operation site and the management of operators, to fulfill the following obligations:
(a) the development of special equipment operating procedures and related safety management system;
(b) the employment of licensed operators, and the establishment of special equipment operators management files;
(c) safety education and training of operators;
(c) safety education and training of operators;
(d) the employer shall strengthen the special equipment operation site and operators management, to perform the following duties and training of operators;
(d) ensure that the license to work and operate according to the rules;
(e) provide the necessary conditions for safe operation;
(f) other prescribed obligations.
Article 21 of the special equipment operators shall comply with the following provisions:
(a) carry documents when operating, and consciously accept the employer's safety management and quality and technical supervision departments of the supervision and inspection;
(b) actively participate in the special equipment safety education and safety and technical training;
(c) strict implementation of the operating procedures for special equipment and relevant safety regulations;
(d) refusal of unauthorized command;
(e) discovery of potential accidents or unsafe factors should be immediately reported to the site management and the person in charge of the unit;
(f) other relevant provisions.
Article 22 of the "special equipment operator license" every four years for review. The licensee shall be in the review period expires three months before, to the licensing department to submit an application for review. Review qualified, by the issuing department in the original certificate signed. For those who have not violated any rules or laws within 2 years and have attended safety training on time, the review period shall be extended in accordance with the provisions of the relevant safety technical specifications. Those who fail the re-examination shall re-take the examination. Late application for review or failed examination, its "special equipment operators license" shall be canceled. Practicing across the region of special equipment operators, can be practicing where the licensing department to apply for review.
Article 23 of the "special equipment operators license" lost or destroyed, the licensee shall promptly report to the licensing department, and in the local media to be announced. Verification of the truth, by the issuing department to replace the certificate.
Article 24 of any unit or individual shall not be illegally printed, forged, altered, sold, rented or lent "special equipment operator card.
Article 25 of the quality and technology supervision departments at all levels shall supervise and inspect the operation of special equipment activities, investigate and deal with illegal operation.
Article 26 of the licensing department shall strengthen the supervision and management of examination organizations, timely correction of irregularities, if necessary, should be sent to the scene to supervise the examination of the relevant activities.
Article 27 of the licensing department to establish special equipment operators supervision and management files, records of the examination and licensing, review and supervision and inspection. Licensing, review and supervision and inspection should be regularly announced to the community.
Article 28 of the special equipment operators test registration, examination, licensing applications, acceptance, review, issuance of certificates and other aspects of the specific provisions, as well as the establishment of the examination body, the "special equipment operator card" cancellation and review of other matters, in accordance with the State Administration of Quality Supervision, Inspection and Quarantine of special equipment operators test rules and other safety specifications.
Chapter IV
Penalties
Article 29 of the applicant to conceal the relevant information or provide false materials to apply for a "special equipment operator license" shall not be admissible or shall not be approved for issuance of certificates, and shall not be allowed to reapply for a "special equipment operator license" within one year.
Article 30 of the following circumstances, shall revoke the "special equipment operators license":
(a) the licensed operator to test as
Legal basis
"Special Equipment Safety Supervision Regulations," Article 2 of the Regulations, referred to in this regulation refers to the special equipment involved in the safety of life, the greater danger of the Boilers, pressure vessels (including cylinders, the same below), pressure pipelines, elevators, lifting machinery, passenger ropeways, large amusement rides and field (plant) special motor vehicles.
The preceding paragraph of the directory of special equipment by the State Council is responsible for the supervision and management of special equipment safety department (hereinafter referred to as the State Council supervision and management of special equipment safety department) to develop, reported to the State Council for approval and implementation.
Article 3 of the production of special equipment (including design, manufacture, installation, transformation, maintenance, the same below), the use of inspection and testing and its supervision and inspection, shall comply with these regulations, but these regulations provide otherwise. Military equipment, nuclear facilities, aviation spacecraft, railroad locomotives, offshore facilities and ships, as well as mine underground use of special equipment, special equipment for civil airports, safety supervision does not apply to these Regulations. Housing construction sites and municipal engineering sites with cranes, field (factory) special motor vehicles, the installation, supervision and management of the use of the competent administrative department of construction in accordance with relevant laws and regulations.
Article IV of the State Council special equipment safety supervision and management department is responsible for the national special equipment safety supervision, the county above the local special equipment safety supervision and management departments responsible for the implementation of the administrative region of special equipment safety supervision (hereinafter collectively referred to as the special equipment safety supervision and management department).
Article V special equipment production, use of units should establish and improve the safety of special equipment, energy saving management system and job safety, energy saving responsibility system. Special equipment production and use of units should be the main person in charge of the unit of special equipment safety and energy saving is fully responsible. Special equipment production, use of units and special equipment inspection and testing organizations, should be subject to special equipment safety supervision and management departments in accordance with the law of special equipment safety inspection. Article XIV of the boiler, pressure vessels, elevators, cranes, passenger ropeways, large amusement rides and their safety accessories, safety protection devices manufacturing, installation, transformation units, as well as pressure piping pipe, fittings, valves, flanges, compensators, safety protection devices (hereinafter referred to as the pressure piping components) of the manufacturing unit and the field (plant) of the special purpose motor vehicles manufacturing, transformation unit, shall be subject to the State Council Special equipment safety supervision and management department license before engaging in the corresponding activities.
The preceding paragraph of special equipment manufacturing, installation, transformation unit shall have the following conditions:
(a) with the special equipment manufacturing, installation, transformation of appropriate professional and technical personnel and skilled workers;
(b) with the special equipment manufacturing, installation, transformation of appropriate production conditions and testing methods;
(c) have a sound quality Management system and responsibility system. Article 12 of the Administrative License Law of the People's Republic of China may set administrative licenses for the following matters:
(1) matters directly related to national security, public **** security, economic macroeconomic regulation and control, ecological environmental protection, as well as directly related to the safety of personal health, life and property, and other specific activities, which are required to be approved in accordance with the statutory conditions;
(2) the development and utilization of limited natural resources, public **** resources, and the use of natural resources;
(3) the quality management system and responsibility. (ii) Matters requiring the granting of specific rights for the development and utilization of limited natural resources, the allocation of public *** resources, and the market access of specific industries directly related to the interests of the public ****