Elevator Installation Tax Classification Code: 30502, Tax Classification Name: Installation Services, refers to the production equipment, power equipment, lifting equipment, transportation equipment, transmission equipment, medical laboratory equipment, and a variety of other equipment, facilities, assembly, placement of engineering operations, including workbenches, ladders, railings connected to the installed equipment installation engineering operations. As well as insulation, anti-corrosion, heat preservation, painting, and other engineering operations of the installed equipment. Name of invoiced goods: construction services * elevator installation.
Two, elevator parts belong to which tax classification code
There are many types of elevator parts, the General Administration of Customs has "elevator guide", "elevator guide bracket" and "elevator pit base "and" elevator pit base "and other three commodities have made an administrative ruling on categorization. Combined with the ruling of the three commodities, talk about the classification of elevator parts.
The elevator consists of a floor station, a weight balance part, a shaft and a pit part, and a car part.
1, part of the floor station
In each floor station is equipped with a door into the car. Elevator door is the door that people see outside the elevator, also called the hall door. The floor door is generally composed of door, rail frame, pulley, slider, door frame, floor can and other components. The door lock is provided on the floor door, only when the car is in the position of the floor station, the floor door is allowed to open automatically, when the door opens in the movement of the car in the movement will immediately stop the movement. Summoning button When you press the up button or down button of a station, the summoning signal is inputted into the elevator control system, so that it can accept the summoning signal. The floor door indicator light is installed on the top or next to the floor door of each station, and some of them are combined with the summoning button. The panel has a number indicating the floor of the stop and an arrow indicating the direction of operation.
Example: elevator floor door panel
The material is stainless steel, and the surface can be processed with titanium and rose gold. It is installed in the waiting hall of the elevator, opening and closing with the car door, and sliding horizontally in the middle part, with the characteristics of corrosion resistance, acid resistance, alkali resistance, and high temperature resistance. The door plate of the hall door is fixedly installed in the floor, not moving up and down with the elevator, and should be classified into the tax code column 7308.3000.
Weight balancing part: the main function is to balance the weight of the car, and the weight difference between the car and the counterweight can be kept within the limit to ensure that the traction transmission of the elevator is normal in the elevator work. The system is mainly composed of counterweight and weight compensation device.
Example: elevator counterweights
The counterweights are steel castings, which are used in the counterweights or weight compensation devices, and serve to relatively balance the weight of the car and compensate for the weight effect of the length of the traction line in the high-rise elevator. The commodity is specifically listed in the "Notes on the tariff rules", should be classified under the tariff code column 7325.1010.
2, shaft and pit part
The size of the elevator shaft is in accordance with the elevator selection to determine the size of the shaft wall to install the elevator track and counterweight track, the reserved doorway to install elevator doors. There is an elevator machine room at the top of the shaft. The pit is located in the part of the shaft below the lowest floor station served by the car. It is provided with a buffer and an elevator stop switch and a shaft light switch, power outlets and lighting; pit doors may be provided as required; the pit should have sufficient space.
Example: elevator guide rail
The elevator guide rail is bent and processed by sheet metal to become elevator fittings, and four round holes are drilled at each end of the guide rail, which is made of sedum steel. Guide rail and guide shoe combination, slide up and down along the guide rail, the guide rail to the guide shoe to apply support to ensure the safety of the elevator. The goods should be classified under tariff code number 8431.3100.
Example: Elevator pit base
The elevator pit is located in the part of the shaft below the lowest station served by the car. The elevator pit base is a steel finished elevator part. Processing method for the raw material by sheet metal bending, welding and processing. Connected with the elevator buffer, in the process of elevator operation, the occurrence of unexpected conditions leading to the fall of the elevator to play the role of buffer stabilization, for the specific shape of steel accessories. The goods should be classified under tariff code No. 8431.3100.
Example: Elevator guide bracket
Elevator guide bracket material is steel, through the machine tool on the plate shearing, punching, bending, welding and other processes. Connected with the elevator rail, fixed elevator rail, to ensure the stability of the elevator car, for the bending steel accessories. The goods should be classified under the tariff code column 8431.3100.
3, the car part
Cabin is the elevator components to transport passengers and goods, is the elevator's working part. Elevator car door that is in the elevator elevator closes the door seen inside, and the hall door (or layer door) relative. Elevator is a vertical lift, equipped with a box-shaped pod, called the car, the elevator is used to carry and transport people and materials box-shaped space. The car is generally composed of the bottom of the car, the wall of the car, the top of the car, the car door and other major components.
Example: Elevator car control panel
The elevator car control panel is installed in the car, which is used to operate the elevator to the first floor, open and close the door, and so on, and its commands should be fed back to the control system center, and the control center will start to act, and the elevator can run. The elevator car control panel consists of a number of switches, which are used to input commands. This merchandise should be classified under tariff code number 8537.1090.