Newly purchased SSD With the following method to install win7 system, how to partition the hard disk

2-4, win7 U disk installation

Do it yourself to make win7 U disk, and then the high people to provide win7 integration of XHCI (USB3.0/3.1 driver) files to replace the old win7 files, this win7 U disk can be used in the Z100 series motherboard installation. The production process is described as follows:

1, download win7 ISO image

64-bit win7 recommended to download this version

cn_windows_7_ultimate_with_sp1_x64_dvd_u_677408

2, the production of the installation of USB flash drive

preparation A 4GB USB flash drive, download UltraISO software.

2-1, use UltraISO to open the win7 ISO image file

2-2, plug in the USB flash drive, click on the "boot/write disk image"

2-3, a dialog window pops up, click on the "Write "

After the writing is completed, the USB flash drive can be used to install a clean version of Win7.

3.Replacing the Win7 boot file

3-1. Please download the Win7 boot file with USB3.0/3.1 driver from here.

There are 2 files for download. boot_chs is Chinese version, suitable for Chinese Win7, Boot_eng is English version, suitable for English Win7.

The file extracted after download is Boot.wim.

3-2, copy Boot.wim to the SOURCES folder of the Win7 USB flash drive you just made, and replace the original boot file. SOURCES folder, replacing the original Boot.wim file.

This Win7 USB flash drive can be used to install Win7 on Z100 series motherboards.

Even with windows 7 Installation turned off, there is no problem with the USB keyboard and mouse not working, and no problem getting stuck on the "Loading Drivers" page during the installation process.