Special equipment self-examination report

Special equipment self-examination report

The hard work inadvertently has come to an end, review this period of time since the work of the achievements and shortcomings, it is very worthwhile to do a good job of summarizing and completing the self-examination report. I believe that we are writing a self-examination report worry about it! The following is my help to organize the special equipment self-inspection report, for reference only, I hope to be able to help you.

Special equipment self-check report 1

According to the Nanjing Quality Supervision on the city to carry out oil and gas pipelines, gas pipeline network safety production special inspection notice (Ning An Committee 20xx45) document requirements, my company quickly set up a self-check and self-correction team to carry out a comprehensive self-check and self-correction for special equipment and special operators, focusing on the implementation of the special equipment of the accident hidden danger inspection Work to ensure that special operators are licensed to work and strengthen safety training. Through this activity our company's special equipment faults and hidden dangers in place basically. Now the self-correction summary report is as follows:

First, the company's special equipment, pressure piping and safety accessories are as follows:

1, special equipment, 2: 1 pressure vessel, electric single girder crane 1

2, the length of the pressure pipeline is about 500 meters

3, a pressure gauge, a safety valve 1 Only

Second, the special equipment self-correction situation description:

A phase of the two special equipment have been used normally, and are within the inspection period. Pressure pipeline length of about 500 meters has been normal use, gas storage tank pressure reaches 0.70MPA when the machine stops running, pressure gauge and safety valve have been calibrated.

Third, the special personnel on board documents self-examination:

has been in the first time to the relevant departments of the training as soon as possible to obtain the qualification certificate

Fourth, the situation of the rectification of the deadline:

1, on the pressure pipeline to do the safety marking

2, the relevant staff must operate in strict accordance with the rules and regulations

V. Training and education:

The company organized the relevant departments to convene a special equipment safety training and learning, mainly for the use of special equipment and to strengthen the operator's awareness of the safety, to eliminate the potential for accidents so as to achieve the purpose of this training.

Special equipment self-inspection report 2

According to the new District Quality Supervision Bureau "on the 2014" two "" will "during the special equipment inspection work notice" of the document Instruction requirements, our company quickly launched a comprehensive self-check and self-correction activities for special equipment and special operators, focusing on the implementation of the special equipment accident hidden trouble investigation and rectification work, to ensure that all special operators are licensed to work, and to strengthen the special operation of the safety training through the self-check and self-check activities, the company's special equipment accident hidden trouble investigation work basically in place, and now will be the self-check and self-check situation summarized as follows.

First, the basis of the situation:

My company's main special equipment existing: three sets of devices **** there are 90 pressure vessels, 2 overhead cranes.

Second, the special equipment self-check self-inspection:

After the inspection of the whole plant pressure vessel found that the second phase of the trolley self-checked hidden dangers of a, for the trolley hook up to run control is not sensitive;

Treatment measures: has replaced the new contactor, the trolley can run normally.

Third, other special accessories and warning signage self-inspection:

1, warning signs, a full set of systems, informing the sign, etc., now combined with the requirements of safety standardization of the unified production is completed, hanging in place.

2, connecting flanges, valves comprehensive inspection.

3, safety valves and rupture disc comprehensive inspection.

Fourth, the special operators on board the document inspection:

The plant's special operators **** 24, the induction rate of 100%, all through the competent authorities to train and qualify for the expiration of the document.

Fifth, the management of responsibility:

1, all safety responsibility system this year, all signed.

2, the holiday period to arrange the relevant personnel on duty, and timely report the holiday production operation to the relevant leaders and departments.

Six, training and education:

The company organized and held a plant-wide special equipment safety training and education learning meeting, the meeting for the "special equipment safety law," "the safe use of special equipment," "special equipment," "special equipment" and "special equipment.

Special Equipment Self-Inspection Report 3

According to the group company safety [20xx] No. 233 "on the development of special equipment safety supervision situation inspection notice" document of the relevant requirements of the oilfield companies in order to further strengthen the safety supervision of special equipment, to ensure the safe and smooth operation of special equipment. Requirements of the company's units in accordance with the unified requirements of the headquarters to seriously organize and carry out special equipment safety supervision status survey and self-assessment work. Our hospital responded positively and quickly launched for special equipment and special operators. Comprehensive self-inspection and self-correction activities, focusing on the implementation of special equipment accident hidden danger investigation and rectification work, to ensure that all special operators are licensed to work. Through this self-inspection activities, the College of special equipment accident hidden danger investigation work is basically in place, now the self-inspection is summarized as follows:

First, the basic situation of the College of the main special equipment:

1. Electric single girder (suspension) cranes 5 tons, 3 tons, 2 tons of each one. Installed in the teaching training base to use.

2. Four elevators. Two of them are passenger elevators (Peach Blossom Hotel), the other two are freight elevators, respectively, installed in the two teaching buildings.

3. 1-ton gas steam boiler two, installed in the boiler room of the General Affairs Office, for the cafeteria, student bathrooms, student water room and laundry steam supply.

Second, the special equipment self-inspection and self-test

1. 3 electric single girder (suspension) crane problems:

① according to the number: 5.1.2 hook defects (no anti-deslacking device);

② according to the number: 7.2 big car without travel limit;

③ according to the number. 5.2.4, 5.2.5 wire rope defects, wire rope diameter wear;

④ according to No.: 7.9 emergency power-off switch (control handle without emergency stop device);

⑤ according to No.: 6.2 line insulation (car, trolley, handle power line aging cracked);

⑥ according to No.: 5.11 chain condition (car power line traction) Steel wire falling); the above problems have been reported by the maintenance and inspection unit Karamay Dushanzi Jianxing mechanical and electrical maintenance department (with the Xinjiang Oilfield Company crane special equipment qualification) rectification is completed, and please grams of Quality and Technical Supervision acceptance. Now put into normal use.

2. four elevator problems:

① Peach and Lee Garden two elevator self-check is normal;

② elevator alarm facilities do not work;

③ elevator light curtain reaction does not work.

The above problems have been reported by the maintenance of Xinjiang Shuda Equipment Installation Engineering Company Limited rectification is completed, and please grams of Quality and Technical Supervision acceptance. Now put into normal use.

3. Two steam boiler self-inspection is normal. Third, the warning signage self-inspection self-inspection

Warning signs, a full set of systems, informative signs, etc., now combined with the standardization of safety requirements unified production is completed, part of the hanging in place.

Fourth, seriously complete the work of special equipment operators license

College special operators on the license hold rate of 100%. Special equipment all completed the declaration of registration, registration, inspection and certification on schedule. And confirmed qualified to use.

Fifth, the safety management of special equipment

1. The implementation of the safety management system is in place, the management system is sound. College boiler equipment has a variety of management systems: "management system", "shift handover system", "job responsibilities" and so on. And require operators to strictly according to the system, standardized operation, and conscientiously perform their duties.

2. Complete registration formalities, safety signs and running checks are good. Boiler, electric single girder (suspension) cranes, elevators are using complete documentation, and hanging safety signs and inspection reports. Equipment with safety accessories, boiler operation to implement the daily handover pre-shift inspection, inspection system during operation.

3. stoker licensed. The college has four stoker, all have stoker qualification certificate.

4. Actively publicize the safety regulations of special equipment, improve the safety awareness of all staff. The use of a variety of learning, safety meetings, vigorously publicize the special equipment safety laws and regulations, to improve the degree of attention and recognition of special equipment safety officer.

Six, the future intention

1. To further increase the special equipment safety laws, rules and regulations of the publicity efforts, and constantly improve the management of special equipment and use of personnel professionalism, safety awareness and legal awareness.

2. Conscientiously implement the safety of special equipment, strengthen the department's awareness of safety responsibilities.

3. Continuously improve the special equipment files, strengthen the dynamic management of special equipment, timely processing of various special equipment inspection, license renewal, timely update of the equipment database.

4. Do a good job of training special equipment operators to ensure the safe operation of equipment.

Special equipment self-examination report 4

According to the Yongning County Quality and Technical Supervision Bureau of the 42nd document, "on the development of 'New Year's Day, Spring Festival' special equipment safety inspection notice" spirit, Yinchuan University special equipment safety self-examination report. Yinchuan University General Affairs Office of the school boiler and other special equipment safety situation of self-check and self-correction, the results of the self-check are reported as follows:

First, the implementation of the safety management system is relatively in place, the management system is sound: the Yinchuan University boiler equipment has a sound "equipment maintenance system", "management system", "handover system", "health, safety and security system", "job responsibilities" and so on and Set up a strict system, according to the duties of the style of work, usually to strengthen education and have a special post duties to fulfill the supervision of personnel, rectification report "Yinchuan University, special equipment safety self-inspection report".

Second, the registration formalities are complete, safety signs and running checks are good, Yinchuan University boiler use of complete documents, and hanging safety signs and related documents. Equipment with safety accessories, boiler operation before the pressure, table safety valve calibration, the calibration out of a substandard safety valve was replaced. In terms of inspection efforts are relatively large, daily inspection before the shift handover, boiler operation during the shift rotation inspection, as well as weekly inspections, monthly inspection and overhaul work is also arranged, and made a detailed record to ensure normal operation.

Third, strict pre-service training of staff, the usual work arrangements and technical guidance in place: Yinchuan University boilers and other special equipment, in the pre-job are strictly trained, the training teacher is a boiler with decades of experience in safety maintenance and operation and management of special equipment masters, and tracking guidance in the school. Each stoker are skilled workers with many years of experience in this school. Plans to conduct two emergency preparedness drills on New Year's Day and before the Spring Festival.

Fourth, the staff stoker qualifications: the use of strict management, standardize the principle of the system, the existing four stoker workers, have a stoker qualification certificate, three shifts on duty.

Fifth, the operation of special equipment file is more complete, standardized management in place. Where the special equipment are equipped with operating files records, real-time follow-up records.

Six, holidays, the whole school attaches importance to safety, at any time to organize safety inspections. Basically eliminated hidden safety hazards, and can ensure that the machine running maintenance personnel on duty in place.

;