Homemade Shilo fountain DIY tools: electric drill (any tool that can make small holes can be), the diameter of the drill bit and the outer diameter of the hose is almost the same, scissors.
Homemade Shilo Fountain Steps: Step 1: First let's make the fountain reservoir, use scissors to cut one of the bottles into the following shape. Step 2: The next step is to drill holes, each bottle cap to drill two small holes, pay attention to safety, tell the children to stand away. Step 3: Then place the first drilled cap upside down on the cap of the second bottle, work the second cap through the holes drilled in the first one, so that you can make sure that all the bottle caps are drilled in the same place. Use the same. Step 4: The parts are all machined, let's assemble it. The schematic is as follows, and I believe it is easy to see and understand.
Homemade Shilo Fountain DIY Tutorial Note: Make sure that all the interfaces to ensure that it is airtight; No. 1 tube 20 cm, No. 2 Hall 30 cm, No. 3 tube 40 cm; use glue to close the interface between the tube and the bottle cap; make sure that all the tubes are at the appropriate height, refer to the assembly diagram.