So the laser marking machine is not out of the light of the troubleshooting methods are:
1. In the parameter settings, look at the laser type is not correct, which belongs to the continuous light failure is a major cause.
2. Pull the control line of the nine stamens, see if there is a loose control line. Connection is not reliable.
3. The power supply above the control line (nine-core wire) to remove, in accordance with the laser power supply pointing key, so as to analyze whether the power supply or the motherboard failure.
4. If the point shooting is normal, it means that the power supply is not faulty.
5. If the point shot is not normal, then the power supply problem.
6. power supply is normal, connect the control line, and then use a multimeter to measure the terminal board above the switch so that the control pins, if not glowing, the normal voltage of 4 volts or more, less than 3 volts, the output of the motherboard is not normal; glowing, the foot voltage should be less than 2 volts, if higher than 2.5 volts of output is not normal.
7. Check the water cycle is not normal, the water flow has no time and again, the water protector is not a problem.
Want to know more about the laser coding machine related issues, recommended VTech laser coding machine. As production lines increase in speed and cope with heavier production tasks, manufacturers need simpler, more efficient laser coding machines to provide high quality coding for their products. VTech offers a wide range of high-performance Co2 laser coders suitable for large format substrates and easy to integrate for virtually any application. The lightweight CO2 laser printers are designed for large format coding needs and have simple setup and operation with plenty of flexibility. Feel free to contact us to inquire about laser marking machines