1. Software Setup:
1.1 Open Printer Driver: Find Printers and Faxes in your computer's control panel, right-click on the printer you need to set up, and select Properties at the bottom to enter the Printer Settings dialog box.
1.2 Printing Preferences Settings: In the Printer Properties dialog box, click Printing Preferences to make the relevant settings.
1.3 Label Type Setting: According to the actual need, select the type of label, such as pitch-positioned labels, labels positioned with black markers, labels positioned with round holes, or continuous paper.
1.4 Label Size Setting: Use a ruler to measure the height and width of the actual label, and set it in the corresponding position in the software. Note: Incorrectly filling in the height can easily lead to interlaced printing.
1.5 Other settings: According to the actual needs, other related settings, such as print density, print speed and so on.
2. Hardware Settings:
2.1 Check Paper: Make sure the printer can recognize the paper and the printing can be done smoothly.
2.2 Calibrate the paper: Adjust the printer paper position to ensure that the printer can recognize the label normally, to ensure that the label can be delivered accurately when printing to avoid waste.
2.3 Working Mode Setting: Set the working mode of the printer according to the actual needs, such as printing thermal labels, thermal transfer labels and so on.
2.4 Paper Cutting Setting: According to the actual demand, set whether you need to cut, tear or peel the paper function.
Through the above steps, you can complete the barcode printer settings. In the actual operation process, it may need to be adjusted appropriately according to the specific situation.